Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Document for Operating Road Cutting Machines

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, OVER 300 PROFESSIONS)

Are you preparing to operate a road cutting machine? Don’t miss this occupational safety document! This document provides detailed guidance on health and safety measures when operating a road cutting machine, ensuring a safe and effective work environment.

Table of Contents

PART I: CURRENT STATE OF SAFETY FOR WORK RELATED TO ROAD CUTTING MACHINES

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents when operating a road cutting machine

When operating road cutting equipment, the risk of occupational accidents is very high due to the complex nature of these activities. Below are some common accident scenarios that operators of road cutting machines may encounter:

Collision with unexpected obstacles: When moving on uneven terrain, road cutting machines can easily collide with unwanted objects such as rocks, trees, or forgotten construction materials. This collision can cause injury to the operator or surrounding personnel.
Risks when working near traffic: When cutting roads near traffic routes or areas, the risk of being hit by passing, inattentive vehicles is very high. This can lead to serious collisions or accidents for those working there.
Errors in equipment operation: Mistakes during the operation of a road cutting machine, such as incorrect control, improper use of equipment, or carelessness in handling devices and tools, can lead to serious accidents.
Lack of training and safety rules: The lack of professional training and safety rules when working with road cutting machines is a major cause of occupational accidents. Employees must be thoroughly trained on how to use the equipment, safety measures, and how to handle hazardous situations.
Risk of hearing damage: The loud noise from the operation of a road cutting machine can pose a risk of hearing damage to those working directly near the equipment.

To minimize the risk of occupational accidents when operating a road cutting machine, companies must ensure that employees are fully trained, equipment is regularly maintained, and occupational safety rules are strictly followed. In addition, wearing personal protective equipment, such as helmets and other personal protective gear, is also very important to protect the health and safety of employees.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN OPERATING A ROAD CUTTING MACHINE

I. Introduction

A. Overview of the importance of occupational safety when operating a road cutting machine

Occupational safety is an extremely important factor when operating road cutting equipment like a road cutting machine. Ensuring safety during this process not only protects the worker but also affects the efficiency and quality of the work. When operating a road cutting machine, potential hazards such as occupational accidents, injuries, and property damage can occur if safety measures are not followed.

First, ensuring that the operator is trained and knowledgeable about occupational safety is crucial. They need to understand the potential risks when working near heavy machinery, especially when operating on public roads with surrounding traffic. In addition, ensuring preventive measures, such as wearing safety glasses, helmets, protective jackets, and safety shoes, is also very important to minimize material and health-related risks.

Second, environmental safety must also be taken seriously. The operation of a road cutting machine can generate hazardous waste such as road dust and exhaust fumes, which adversely affect the health of workers and the surrounding environment. Therefore, pollution control measures must be implemented, including the use of respiratory protection equipment and other control measures to minimize pollution.

Finally, regular maintenance and upkeep of road cutting equipment also play an important role in ensuring occupational safety. The equipment needs to be checked regularly to ensure it operates efficiently and safely. Using low-quality or damaged equipment can lead to unexpected incidents.

B. Important safety protocols and regulations when operating a road cutting machine

Before operating a road cutting machine, adhering to safety protocols and regulations is extremely important to ensure the safety of workers and the surrounding environment. One of the main regulations is to ensure that the operator has been fully trained on the use and operation of the road cutting machine. This training includes understanding potential hazards, how to use safety equipment, and the response procedure in case of an incident.

In addition, performing regular checks and maintenance on the road cutting machine is a necessary step to ensure safe operation. These checks include inspecting the braking system, electrical system, engine, and other moving parts of the vehicle. If any problems are found, they must be repaired and maintained promptly to avoid unwanted risks.

Implementing personal protective measures is also an important element of the safety protocol. The operator must be fully equipped with protective gear, including a helmet, safety glasses, a protective jacket, safety gloves, and shoes that meet safety standards. Wearing protective gear correctly and throughout the working time is essential to minimize the risk of injury.

Finally, complying with environmental regulations is also an indispensable part of the road cutting machine’s operating procedure. Proper disposal of waste and other pollutants is necessary to protect the environment and the health of the community.

II. Components and Functions of a Road Cutting Machine

A. The different components of a road cutting machine

A road cutting machine is a specialized piece of equipment used to cut and level road surfaces. It consists of the following main components:

First is the vehicle frame: This is the basic component of the road cutting machine, helping to support and withstand the forces and loads during operation. The frame is usually made of strong steel material to ensure the necessary durability and rigidity.

Second is the engine: The engine is the heart of the road cutting machine, providing the power to operate the cutting parts and move the vehicle. The engine is usually a high-power diesel type to ensure the ability to cut and level the road surface effectively.

Third is the cutting and leveling unit: This part includes cutting knives or blades mounted under the vehicle to cut and level the road surface. The cutting blades are usually designed to be able to cut deep and quickly, while also ensuring the quality of the finished road surface.

Fourth is the steering and control system: The road cutting machine is equipped with a steering system and controls so that the operator can control and direct the vehicle accurately and safely during work.

Fifth is the exhaust system: Because the road cutting operation can create waste such as road dust and debris, the road cutting machine is often equipped with an exhaust system to collect and process them effectively, minimizing environmental pollution.

B. Structure and operating principle of a road cutting machine

The structure and operating principle of a road cutting machine are very diverse, depending on the type of equipment and its intended use. Some common features of its structure and operating principle include:

The structure of a road cutting machine usually includes a sturdy frame to support the various parts of the equipment. On this frame, the main components such as the engine, cutting system, and leveling surface are installed. The engine is usually a powerful diesel type to provide enough energy for the process of cutting and leveling the road surface.

The operating principle of a road cutting machine is to use rapidly rotating cutting knives or blades to cut through the hard road surface layer. Then, other parts such as a compactor or a leveling plate are used to smooth the road surface, ensuring the cut road surface is even and smooth.

The control system on the road cutting machine allows the operator to control the direction of movement and the cutting depth of the equipment. In addition, the road cutting machine often has a dust collection system to gather rock fragments and road dust, helping to keep the work environment clean and safe.

C. Applications of the road cutting machine in the road and bridge construction industry

The road cutting machine is an important tool in the road and bridge construction industry, playing a major role in the process of preparing the road surface before construction. In the road and bridge construction industry, the road cutting machine is used to perform tasks such as cutting the road to adjust the height, cutting the road to clean the old surface layer, or removing cracks and damage on the road surface.

One of the main applications of the road cutting machine is to prepare the road surface before applying a new pavement layer. The road cutting machine can cut deep and precisely to remove old, uneven road layers, cracks, and damaged surfaces. This process helps to create an even and clean road surface for further construction work.

In addition, the road cutting machine is also used to cut the road to adjust the height and dimensions of the road surface during the construction of roads and bridges. Adjusting the height of the road surface is very important to ensure the accuracy and safety of the construction project.

D. Risks associated with operating a road cutting machine

Operating a road cutting machine can present significant risks that the operator must be aware of and address. Some of these risks include occupational accidents from using cutting equipment with sharp blades. If safety rules are not followed and adequate protective gear is not worn, the operator may be in danger from the cutting blades or moving parts of the machine.

In addition, working in a dusty road environment also poses a health risk to the operator. Road dust and small particles can cause respiratory irritation and lead to health problems. Failure to wear a mask or appropriate respiratory protection can lead to respiratory issues.

Furthermore, traffic safety risks are also a concern when operating a road cutting machine on public roads. The risk of collision with other vehicles or with pedestrians can occur if there is a lack of attention and careful observation when moving the vehicle.

Finally, issues related to equipment maintenance and repair are also a potential risk. If the road cutting machine is not regularly maintained and repaired correctly, unexpected incidents such as breakdowns or sudden stops can occur, affecting the safety and efficiency of the work.

III. Safety Inspection and Maintenance Before Operating a Road Cutting Machine

A. Safety check before operating a road cutting machine

Before operating a road cutting machine, performing a safety check is crucial to ensure the operation is carried out safely and effectively. First, the operator should check the overall condition of the vehicle, including the electrical, hydraulic, and mechanical systems. Ensure that all major parts of the vehicle, such as the engine, cutting system, and leveling table, are functioning correctly and show no signs of damage.

Next, the operator should check the safety components on the vehicle, such as the braking system, steering system, and control system. Ensure that these parts are working accurately and flexibly to avoid unexpected incidents during operation.

In addition, checking personal protective equipment is also an important step. The operator must ensure that they are wearing full protective gear such as a helmet, safety glasses, gloves, and safety shoes. These are necessary items to protect the operator’s health and safety during work.

Finally, before operating the road cutting machine, the operator must carefully inspect the work environment. Ensure there are no obstacles or hazards around the vehicle and identify safe work zones. In addition, ensure that everyone in the work area has been notified and has appropriate protective measures in place.

B. Guide to periodic maintenance of a road cutting machine

To ensure the effective and safe operation of a road cutting machine, periodic maintenance is very important. Below are the periodic maintenance steps that operators should follow:

Check and maintain the engine: Regularly check the oil and oil filter periodically to ensure the engine runs smoothly and durable. In addition, check and clean the cooling system and fuel system to ensure efficiency and fuel economy.
Check the electrical system: Check the wires, sockets, light bulbs, and electronic systems on the vehicle. Replace or repair damaged or faulty parts to avoid electrical problems during operation.
Maintain the cutting and leveling system: Check the cutting blades and leveling table, ensuring they are sharp and not worn. Lubricate moving parts and adjust the tension of the chain or belt to ensure smooth and safe operation.
Check the brake system: Ensure the brake system is working well. Check and replace the brake pads or shoes periodically to ensure effective braking ability in all situations.
Maintain the dust collection system: Check and clean the dust collection system, including the filter and hoses, to ensure good suction and keep the work environment clean.
Overall inspection and minor repairs: Perform an overall inspection of the vehicle and repair minor scratches, stains, or other small defects on the vehicle’s surface.

This periodic maintenance process helps to extend the life and increase the stability of the road cutting machine, while also minimizing the risk of incidents during operation. To ensure safety and performance, follow the maintenance schedule correctly and use genuine parts for the vehicle.

IV. Safe Operating Procedure for a Road Cutting Machine

A. Step-by-step guide on the safe operating procedure for a road cutting machine

To operate a road cutting machine safely and effectively, a proper procedure and the following steps must be followed:

Training and understanding: Before operating a road cutting machine, the operator must be fully trained on the use of the equipment and safety rules. They need to have a clear understanding of the potential risks, the parts of the vehicle, and how to operate it safely.
Check the vehicle before operation: Before each use, check the overall condition of the vehicle, including the electrical system, cutting and leveling system, braking system, and other parts. Ensure that the vehicle is operating normally and safely.
Wear protective gear: Before starting operation, the operator must ensure they are wearing full protective gear such as a helmet, safety glasses, a protective jacket, gloves, and safety shoes. These are necessary items to protect health and safety.
Control speed and direction: Always maintain a safe speed and control the vehicle carefully. Monitor the surrounding environment and avoid unexpected obstacles.
Maintain during operation: During operation, regularly re-check the parts on the vehicle such as the cutting and leveling system, control system, and dust collection system. Periodic maintenance helps to ensure the vehicle operates stably and safely.
Stop the vehicle safely: When finishing work or needing to stop the vehicle temporarily, the operator must ensure they stop in a safe location and turn on the warning lights to let others know.

B. Emergency response measures and incident response mechanisms when operating a road cutting machine

During the operation of a road cutting machine, being prepared and knowing how to handle emergency situations and incidents is very important to ensure safety and work efficiency. Below are the emergency response measures and incident response mechanisms that operators should be aware of:

Stop the vehicle and turn off the engine: In case of an incident or dangerous situation, the operator must immediately stop the vehicle and turn off the engine to prevent the situation from worsening.
Assess the situation: Immediately after stopping the vehicle, the operator needs to assess the situation to determine the cause of the incident and its severity. This helps in making the right decisions on how to proceed.
Report and contact the responsible person: If necessary, the operator should immediately inform a higher-ranking responsible person about the incident and request assistance or further handling instructions.
Apply temporary repair measures: In some cases, the operator can apply temporary repair measures to fix the problem and ensure the safety of themselves and everyone around.
Adhere to safety procedures: During the incident handling process, the operator must follow the safety procedures they have been trained on to ensure they do not cause further danger to themselves and others.
Post-incident review: After the incident has been handled, the operator should conduct a review to draw lessons and propose preventive measures for the future.

V. Risk Assessment and Hazard Management When Operating a Road Cutting Machine

A. Identifying potential risks and hazards in operating a road cutting machine

Before operating a road cutting machine, the operator needs to identify and clearly understand the potential risks and hazards to implement appropriate preventive and safety measures. Some of the risks and hazards in operating a road cutting machine include:

Risk of collision and occupational accidents: A road cutting machine is a large, heavy piece of equipment that moves on public roads. Operating the vehicle in a busy traffic environment can lead to the risk of collision with other vehicles or pedestrians. In addition, occupational accidents can occur from using sharp cutting devices or not following safety rules.
Risk of injury from cutting blades and leveling table: The cutting devices on the vehicle have sharp blades and can be dangerous if not used correctly. The operator must always keep their hands and other body parts away from the cutting and leveling areas to avoid the risk of injury.
Hazards from road dust and noise: The operation of a road cutting machine generates a lot of road dust and noise. Road dust can cause respiratory irritation and health problems, while noise can affect hearing. To cope, the operator must wear full protective gear and use appropriate noise protection devices.
Risk of explosion or fire: A road cutting machine uses fuel and electrical systems. If not properly maintained, there may be a risk of explosion or fire. Regular inspection and maintenance are necessary to ensure safety during operation.
Terrain and weather conditions: Different terrain conditions and unfavorable weather can increase the risk of incidents when operating a road cutting machine. The operator needs to assess and adapt to the work environment to ensure safety.

B. Effective hazard prevention strategies when operating a road cutting machine

1. Regular inspection and maintenance of the road cutting machine for safe operation

Regular inspection and maintenance of a road cutting machine is extremely important to ensure safe and effective operation. Regular maintenance helps to detect and fix technical problems before they cause dangerous incidents. Below are the points to pay attention to during the regular inspection and maintenance of a road cutting machine:

Electrical system: Check and test the vehicle’s electrical system, including the control system and other electrical devices such as lights, warning lights, and horn. Ensure that electrical connections are not oxidized or loose and replace faulty parts if necessary.
Cutting and leveling system: Check the vehicle’s cutting blades and leveling table. Ensure the blades are sharp and not worn to ensure the best cutting performance and to avoid the risk of injury to the operator.
Brake system: Check and test the vehicle’s brake system. Ensure that the brakes are working effectively and show no signs of wear or damage. Replace old or weak brake parts if necessary.
Hydraulic system: Check and maintain the vehicle’s hydraulic system, including checking the oil level, hoses, and valves. Ensure that there are no oil leaks and the system is operating stably.
Filters and cooling system: Replace the oil and air filters periodically to keep the engine running smoothly and free of contaminants. Check and clean the cooling system to ensure the vehicle’s operating temperature is always within a safe range.
General inspection: Perform a general inspection of the entire vehicle to detect any unusual signs, unnecessary noise, or any other issues that could affect the safe operation of the vehicle.

The operator should follow the manufacturer’s maintenance schedule and perform the correct maintenance measures to avoid unwanted incidents and ensure the vehicle’s longevity.

2. Adhere to occupational safety regulations for the safe operation of a road cutting machine

Adhering to occupational safety regulations is a necessary requirement to ensure safety in the operation of a road cutting machine. When using a road cutting machine, applying safety rules is extremely important to protect the health and lives of employees as well as the surrounding public.

First, wearing personal protective equipment (PPE) is essential. Ensure that all employees wear helmets, safety glasses, protective hats, and appropriate clothing when working with the road cutting machine. In addition, they should be trained on how to use this equipment safely and effectively.

Second, regular cleaning and maintenance of the cutting machine is an important step to ensure safe operation. The machinery should be checked regularly to detect and rectify technical problems early. Regular maintenance also helps to extend the life of the equipment.

Finally, operational supervision is necessary to prevent accidents. The operator of the road cutting machine should always be focused and follow all safety instructions. Work areas should be restricted and clearly marked to avoid danger to pedestrians and vehicles.

3. Identify and mark a safe zone when operating a road cutting machine

When operating a road cutting machine, identifying and marking a safe zone is very important to protect the workers and pedestrians around. First, it is necessary to analyze the environmental conditions around the work area. Ensure that there are no pedestrians or vehicles passing near the operating position of the road cutting machine.

Next, identify and clearly mark the safe zones. These are areas that only trained personnel can access. Use signs, barriers, or other means to indicate the limits of the safe zone and warn pedestrians of the danger.

In addition, plan the operational activity so that the work area of the road cutting machine is isolated and protected. Ensure that no one is near the working position of the road cutting machine other than authorized and trained personnel.

4. Use personal protective equipment when operating a road cutting machine

The use of personal protective equipment is an extremely important step when operating a road cutting machine to ensure the safety of the worker. When approaching and working with a road cutting machine, employees must wear full personal protective equipment such as a helmet, safety glasses, a respirator mask, a waterproof and brush-resistant jacket, protective gloves, long pants, and safety shoes.

A helmet is necessary to protect the head from objects falling from above. Safety glasses help protect the eyes from dust, sand, and debris during operation. A respirator mask should be worn to prevent inhalation of toxic gases, harmful fumes, or harmful dust during road cutting.

A waterproof and brush-resistant jacket, protective gloves, long pants, and safety shoes help protect the skin and body from harmful materials and the risk of impact. This is essential equipment when working with a road cutting machine to minimize the risk of accidents and protect the health of employees. Adherence to the use of personal protective equipment is a very important matter and should not be taken lightly in a high-risk work environment such as operating a road cutting machine.

5. Emergency procedures and response in case of an incident when operating a road cutting machine

Emergency procedures and responses in case of an incident when operating a road cutting machine are an important part of ensuring occupational safety. When an incident occurs, employees must follow the steps below to respond effectively:

First, as soon as an incident is detected, employees must stop work immediately and put the road cutting machine into a safe mode. If possible, move the vehicle out of the dangerous position and protect yourself as well as others around.

Next, report the incident to the appropriate authority. Timely reporting helps to deploy emergency measures and support quickly to resolve the situation.

Then, follow the manufacturer’s incident instructions and the company’s safety procedures. These are important instructions for handling the incident correctly and effectively.

Finally, after handling the incident, re-evaluate the situation to learn and improve the process. Drawing lessons from the incident helps to improve the ability to cope and prevent in the future.

6. Participate in occupational safety courses when operating a road cutting machine

Occupational safety and health training is not only a legal requirement but also a commitment to the safety and health of workers. It helps employees recognize and deal with risks and hazardous situations, thereby reducing accidents, injuries, or fatalities in daily work.

The risk of accidents is always present and can happen at any time in the work environment due to the possibility of human error and the inability to anticipate every situation. This emphasizes the need for continuous Occupational Safety Training and vigilance.

When participating in occupational safety training at Nam Viet Safety Training Center, workers will be thoroughly trained from theory to practical risk scenarios. Accordingly, there will be measures to identify and prevent occupational accident risks that may occur during work. After the training course, trainees will take occupational safety tests to obtain an occupational safety certificate. From there, workers will have a clear understanding of safety knowledge as well as a valid certification for work.

VI. Factors Affecting Occupational Safety When Operating a Road Cutting Machine

A. How do weather conditions affect the operation of a road cutting machine?

Weather conditions have a major impact on the operation of a road cutting machine. In an outdoor work environment, weather factors such as rain, snow, high humidity, or extreme temperatures can affect the performance and safety of the road cutting machine.

In rainy conditions, especially heavy rain, operating a road cutting machine becomes more dangerous due to the slipperiness of the road surface. Water can reduce the grip of the wheels and make it difficult to control the vehicle. In addition, rain can also reduce the driver’s visibility and increase the risk of collision.

In the case of snow-covered roads, operating a road cutting machine becomes very difficult due to limited visibility and reduced wheel grip. This can be dangerous for the driver and surrounding personnel.

High humidity can also cause some problems such as fog, reducing visibility and increasing the risk of slipping on the road surface. In addition, extreme temperatures can also affect the operation of the electronic devices on the road cutting machine.

B. How does the work environment affect the operation of a road cutting machine?

The work environment has a significant impact on the operation of a road cutting machine. First, air pressure and humidity conditions can affect the performance of the engine and the electronic devices on the vehicle. In an overly humid environment, there is a risk of damage or malfunction of electronic components, causing problems during operation. In addition, low air pressure conditions can reduce engine performance and increase fuel consumption.

Second, an environment with dust, sand, or debris from the road cutting process can affect the vehicle’s operation. Dust and sand can reduce the grip of the wheels and other parts of the vehicle, causing rapid wear and tear.

In addition, the terrain and geological conditions of the work environment also affect the operation of the road cutting machine. If the terrain is difficult, the ground is unstable, or there are changes in elevation, controlling the road cutting machine will become more difficult and dangerous.

C. How does the technical condition of a road cutting machine affect its operation?

The technical condition of a road cutting machine has a significant impact on the operation and safety of the equipment. First, the reliability of the engine and the mechanical systems on the vehicle are very important. If the engine is not running stably or the mechanical parts are damaged, operating the road cutting machine will be difficult and there is a risk of serious incidents.

Second, the control and electronic systems on the vehicle also play an important role in controlling and monitoring the operation of the cutting machine. If the sensors, controllers, or electronic systems are not working properly, operating the vehicle may be inaccurate and dangerous for the operator.

In addition, the condition of the wheels, brake system, and suspension system also affect the stability and safety of the vehicle when operating on different terrains. Damaged wheels can reduce the vehicle’s grip and flexibility, posing a danger during operation.

D. How do the safety knowledge and skills of the worker affect the operation of a road cutting machine?

The safety knowledge and skills of the worker play a crucial role in the operation of a road cutting machine. First, understanding and applying safety rules when working with the equipment is necessary to minimize the risk of accidents. Workers need to know how to use personal protective equipment correctly and always wear it when operating the vehicle.

Second, knowledge of the skills to operate a road cutting machine also affects the efficiency and safety of the work. Workers need to be trained and have practical skills in controlling and navigating the road cutting machine on different types of terrain. This skill includes the ability to steer accurately, handle emergency situations, and know how to deal with technical problems when they occur.

In addition, meticulousness and concentration are also important skills. Operating a road cutting machine requires attention to small details, especially when working near hard and sharp materials. This skill also plays an important role in ensuring the safety of oneself and those around.

VII. Occupational Safety Training on Skills for Safe Operation of a Road Cutting Machine

A. Why do operators of road cutting machines need to be trained in occupational safety?

Operators of road cutting machines need to be trained in occupational safety for several important reasons. First, occupational safety training helps operators to clearly understand the safety principles when working with a road cutting machine. They will know how to correctly use personal protective equipment such as helmets, safety glasses, waterproof jackets, and gloves to protect themselves from the risk of accidents and injuries.

Second, occupational safety training helps operators to master the safety procedures in operating a road cutting machine. They will be instructed on how to inspect and maintain the equipment, how to react in emergency situations, and how to deal with technical problems at work.

In addition, occupational safety training also helps to raise awareness of risks and accident prevention measures. Operators will learn how to assess and manage risks during work, thereby minimizing the risk of unwanted incidents.

B. Where to get occupational safety training for operating a road cutting machine?

An Toan Nam Viet is a reputable and high-quality occupational safety training center in Vietnam today. With occupational safety training sessions held continuously at production workshops, factories, or construction sites across the country (63 provinces in Vietnam).

To ensure the effectiveness of the training, An Toan Nam Viet prepares carefully and meticulously, down to the smallest detail. From preparing tools, equipment, teaching aids to curriculum, materials, sound, and lighting.

The occupational safety training instructors at An Toan Nam Viet are experts with many years of experience in the field. They even have research projects identifying hazards in all industries and how to prevent them.

The instructor’s lectures are drawn from practice and conveyed in the most vivid and easy-to-understand way to the workers. These factors help workers feel comfortable during the learning process and absorb the teaching knowledge well. Of course, the knowledge conveyed always adheres to Decree 44/2016/ND-CP. From there, they will grasp many measures to prevent hazards and how to protect themselves. At the same time, they will also apply it most appropriately in their actual work.

VIII. The Significance of Occupational Safety in Operating a Road Cutting Machine

A. The importance of maintaining occupational safety in the operation of a road cutting machine

Maintaining occupational safety in the operation of a road cutting machine is extremely important because it relates to the protection of employees and those around, as well as ensuring the effective operation of the equipment. First and foremost, occupational safety helps to minimize the risk of accidents and injuries to employees. The correct use of personal protective equipment and adherence to safety procedures when operating a road cutting machine helps to protect the health and lives of workers.

Second, maintaining occupational safety increases the efficiency and reliability of the equipment. When operators are trained and apply safety measures, they can operate more effectively and minimize incidents that cause interruptions in the work process.

In addition, maintaining occupational safety helps to increase the reliability of the business. A safe work environment not only increases labor productivity but also helps to enhance the company’s reputation and image in the eyes of customers, partners, and the community.

B. Important safety measures to know before operating a road cutting machine

Before operating a road cutting machine, workers need to be aware of and adhere to a number of important safety measures to ensure safety during work. First, it is essential to wear full personal protective equipment. This includes a helmet to protect the head, safety glasses to prevent dust and airborne particles, a waterproof jacket, and gloves to protect the skin when in contact with sharp materials.

Second, operators need to be trained on the safety procedures when operating a road cutting machine. This includes being familiar with the controls on the vehicle and knowing how to use them safely and effectively. At the same time, workers need to know how to react in emergency situations such as a sudden stop or handling technical problems.

In addition, regular inspection and maintenance of the road cutting machine is also an important safety measure. Before starting work, the operator needs to inspect the vehicle to ensure that all parts are functioning normally and safely. If any problems or defects are found, they should be reported and repaired immediately to avoid risks during operation.

Complete the occupational safety training course to be issued an occupational safety card by the occupational safety training center to properly supplement your work records.