Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Document for Operating Reciprocating Saw (Sword Saw) Machines

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, OVER 300 PROFESSIONS)

Are you learning about occupational safety when using a reciprocating saw? This document provides detailed and important instructions to ensure safety when operating this dangerous equipment. Discover accident prevention measures and necessary regulations to protect yourself and your colleagues in the workplace.

Table of Contents

PART I: CURRENT STATE OF SAFETY FOR WORK RELATED TO RECIPROCATING SAW MACHINES (SWORD SAW MACHINE)

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents when operating a reciprocating saw (sword saw machine)

When operating a reciprocating saw (sword saw machine), occupational accidents can occur for various reasons. Below are some common accident cases when using a reciprocating saw:

Cuts to wrists and fingers: Due to a lack of awareness or failure to follow safety rules, users of the machine may suffer serious injuries upon contact with the saw blade.
Danger from a slipping blade: When control of the saw blade is lost, the risk of the blade slipping is very high, which can cause injury or trauma.
Injury from improper blade operation: If the saw blade is not operated correctly, it can cause cuts or blade breakage, endangering the user and those nearby.
Risk of blade kickback: When encountering material that is too hard or not held securely, the saw blade can kick back and cause serious accidents.
Injury from wearing improper clothing: Wearing loose clothing or inappropriate items can lead to the risk of being pulled into the saw blade.

To minimize these accidents, it is very important to follow safety rules when operating a reciprocating saw. Users should be fully trained on how to use the machine, always wear personal protective equipment, and adhere to the specific safety rules of the manufacturer. Regular maintenance is also very important to ensure the machine always operates effectively and safely.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN OPERATING A RECIPROCATING SAW MACHINE (SWORD SAW MACHINE)

I. Introduction

A. Overview of the importance of occupational safety when operating a reciprocating saw (sword saw machine)

Occupational safety is an extremely important factor when operating a reciprocating saw (sword saw machine). Ensuring safety in this work environment is of utmost importance for manufacturers and workers. The use of a reciprocating saw requires high vigilance for hazards such as injuries from the saw blade, impacts, and the risk of fire from electrical systems. Employees need to be fully trained on how to use the reciprocating saw, including basic safety rules such as wearing safety glasses, gloves, and puncture-resistant clothing. In addition, regular maintenance and upkeep of the reciprocating saw are also very important to ensure safe and effective operation. It is not just about implementing basic safety measures, but also about establishing detailed safety procedures for each stage of the reciprocating saw’s operation. Implementing these measures will minimize the risk of serious accidents and protect the health of workers in this hazardous work environment.

B. Important safety protocols and regulations when operating a reciprocating saw (sword saw machine)

When operating a reciprocating saw (sword saw machine), safety protocols and regulations are very important to ensure the safety of workers and prevent serious accidents. First, safety training is extremely important. All employees must be fully trained on how to use the reciprocating saw, including how to start, stop the machine, and safe practices when working near it. Wearing protective equipment such as a helmet, safety glasses, puncture-resistant clothing, and gloves is mandatory when working with a reciprocating saw.

Second, maintenance protocols and periodic inspections are also very important. The reciprocating saw needs to be properly maintained to ensure stable and safe operation. The machine parts need to be regularly checked to detect and repair technical faults in a timely manner, from the saw blade system to the electrical system.

II. Components and Functions of a Reciprocating Saw (sword saw machine)

A. The different components of a reciprocating saw (sword saw machine)

A reciprocating saw (sword saw machine) consists of the following main components:

Saw blade: This is the main part of the machine, used to cut and divide materials such as wood, metal, or plastic. The saw blade can be a rotating or straight-moving type, depending on the intended use of the machine.
Motor: This is the main power source that provides the thrust for the saw blade to operate. The motor of a reciprocating saw is usually an electric or internal combustion engine.
Machine frame: This is the main frame to place and support the other parts of the reciprocating saw. The frame needs to be designed to be sturdy to ensure stability during operation.
Work table: This is the surface where the material to be cut is placed. The work table can be adjusted to accommodate various sizes and shapes of material.
Control system: This includes switches and controllers to adjust the speed, cutting depth, and other operations of the reciprocating saw.
Protection system: These are structural parts intended to ensure safety when using the machine, including a blade guard, a shield, and other safety devices to prevent accidents during operation.

These components are crucial elements of a reciprocating saw, working together in harmony to provide performance and safety during use.

B. Structure and operating principle of a reciprocating saw (sword saw machine)

A reciprocating saw (sword saw machine) has a structure and operation based on a few basic principles. Typically, a reciprocating saw includes a saw blade mounted on a rotating shaft, which is activated by a motor. When the machine is turned on, the motor generates thrust to rotate the saw blade shaft, creating a cutting motion.

The structure of a reciprocating saw usually includes a main frame to house other components such as the motor, saw blade, and work table. The work table is where the material to be cut is placed and can be adjusted to change the cutting angle. The control system on the reciprocating saw allows the operator to adjust the rotation speed of the saw blade and the cutting depth as required.

The operating principle of a reciprocating saw is to use a rotating saw blade to contact the material and cut through it. The material is placed on the work table and moved through the saw blade, or the saw blade moves across the work table to cut the material. The motor generates the power for the saw blade to rotate and perform the cutting process.

During operation, it is important to pay attention to safety measures such as wearing safety glasses and puncture-resistant clothing to protect yourself from the dangers of the saw blade and flying material fragments. At the same time, regular maintenance and inspection of the parts of the reciprocating saw are very important to ensure the safe and effective operation of the machine.

C. Applications in construction, electrical, ironworking, mechanical, and craft projects of a reciprocating saw (sword saw machine)

A reciprocating saw (sword saw machine) has many important applications in the construction, mechanical, and craft industries. In the construction industry, reciprocating saws are used to cut materials such as wood, metal, plastic composites, and other building materials. Construction contractors often use reciprocating saws to cut material panels for doors, windows, floors, and many other applications during the construction and finishing of a project.

In the electrical and ironworking industries, reciprocating saws also play an important role. Electricians often use reciprocating saws to cut electrical conduits and metal parts during the installation of electrical systems. Ironworkers also use reciprocating saws to cut iron bars and metal pipes for mechanical and construction projects.

In addition, reciprocating saws are also widely used in craft and art projects. Craft artisans use reciprocating saws to shape and cut material panels into special shapes and patterns. The use of reciprocating saws for craft projects provides high cutting precision and speed, helping to improve the efficiency and quality of the final product.

D. Risks associated with operating a reciprocating saw (sword saw machine)

Operating a reciprocating saw (sword saw machine) involves many risks and dangers that the user must pay attention to and address. One of the main risks is the danger of injury from contact with the saw blade or the moving parts of the machine. If safety measures are not followed, the user may be at risk of cuts, lacerations, or even losing a finger.

In addition, a reciprocating saw operates with high power and has a fast-rotating saw blade, so there is a risk of causing serious accidents such as flying material fragments, causing injury to the user or those nearby. This is why ensuring a safe workspace and wearing adequate protective gear is very important when operating a reciprocating saw.

Furthermore, risks related to electricity are also a potential hazard when using a reciprocating saw. If the machine’s electrical system is not properly maintained or if there is a malfunction, the user could be electrocuted or create a fire hazard. Therefore, regular inspection and maintenance of the machine’s electrical components are necessary to ensure the safety of everyone during operation.

III. Safety Inspection and Maintenance Before Operating a Reciprocating Saw (sword saw machine)

A. Safety check before operating a reciprocating saw (sword saw machine)

Before operating a reciprocating saw (sword saw machine), performing a safety check is very important to ensure the safe and effective operation of the machine. First, check the general condition of the machine. Ensure that no part of the machine is damaged, broken, or worn, especially the motor and the saw blade system. If any problems are found, they should be repaired or replaced before continuing use.

Next, check the machine’s electrical system. Ensure that the power cord and outlet are not damaged, and that the electrical connections are installed tightly and safely. Check other electrical parts such as the switch and control unit to ensure they are working normally.

In addition, ensure that protective equipment such as safety glasses, gloves, and puncture-resistant clothing are available and worn correctly before starting to operate the reciprocating saw. This protective equipment helps to protect the user from risks and injuries during work.

Finally, ensure the workspace around the reciprocating saw is clean and clear. Remove any excess materials and ensure no one else is near the cutting area. Maintaining a clean and safe workspace is very important to avoid unwanted accidents.

B. Guide to periodic maintenance of a reciprocating saw (sword saw machine)

Periodic maintenance of a reciprocating saw (sword saw machine) is very important to ensure the safe and effective operation of the machine. First, check and clean the main parts of the machine such as the saw blade, motor, and control system. Remove dust, grease, and accumulated material fragments from the surfaces to ensure the machine operates smoothly and without problems.

Next, check and adjust the mechanical parts of the machine. Ensure that the saw blade guides are properly maintained and not worn or damaged. Check and adjust the drive system and other parts to ensure the accuracy and performance of the machine.

In addition, check the electrical system of the reciprocating saw. Ensure that the power cord, control unit, and other electrical devices are not damaged and are working normally. Check the electrical connections and other electrical parts to ensure safety during use.

Finally, do not forget to maintain the protective and preventive equipment. Check and replace any protective parts (e.g., safety glasses, gloves, puncture-resistant clothing) if necessary to ensure the safety of the person using the reciprocating saw.

IV. Safe Operating Procedure for a Reciprocating Saw (sword saw machine)

A. Step-by-step guide on the safe operating procedure for a reciprocating saw (sword saw machine)

To operate a reciprocating saw (sword saw machine) safely, you need to follow these steps:

Wear protective gear: Before you start, make sure you are wearing adequate protective gear such as safety glasses, a mask, gloves, and puncture-resistant clothing. This is basic protective equipment to protect you from the risk of injury when working with a reciprocating saw.
Inspect the machine: Perform a general inspection of the machine before use. Ensure that parts such as the saw blade, motor, and control system are working normally and there are no issues. If you find any problems, you should not continue to operate the machine but should perform maintenance or repairs first.
Prepare the material to be cut: Prepare the material to be cut and place it on the work table of the reciprocating saw. Ensure that the material is securely fastened and does not shift during the cutting process.
Set up the machine: Adjust the settings on the reciprocating saw according to the job requirements. Adjust the cutting speed, cutting depth, and other parameters before starting the machine.
Start the machine and cut: Start the machine according to the guided procedure. Make sure you have double-checked everything and that no one else is near the cutting area. Proceed to cut the material carefully and accurately, following all safety rules and using full protective gear.
Finish and double-check: When you have finished the cutting job, turn off the machine and double-check everything. Make sure the material has been cut correctly and that no problems have occurred.
Clean up and store: After you are finished, clean up the work area and store the reciprocating saw properly to ensure its safety and longevity.

Following these steps will help you operate a reciprocating saw safely and effectively, minimizing the risk of accidents and protecting your health during work.

B. Emergency handling measures and incident response mechanisms when operating a reciprocating saw (sword saw machine)

During the operation of a reciprocating saw (sword saw machine), applying emergency handling measures and incident response mechanisms is very important to ensure the safety of employees and equipment. When an incident occurs, employees should immediately turn off the machine’s power and ensure the surrounding area is safe. If possible, they should call a technician or the responsible manager to report the incident.

In addition, maintaining personal safety is very important. Employees should be trained to use personal protective equipment, such as safety glasses and gloves, to avoid injury in the event of an incident. Regular inspection and maintenance are also an important measure to ensure the reciprocating saw always operates safely and effectively.

If the incident cannot be resolved immediately, reporting and recording details of the incident is very important to analyze the cause and take necessary corrective or adjustment measures. Developing an incident response plan in advance can also help to mitigate risks and minimize losses when an unwanted incident occurs during the operation of a reciprocating saw.

V. Risk Assessment and Hazard Management when Operating a Reciprocating Saw (sword saw machine)

A. Identifying potential risks and hazards in operating a reciprocating saw (sword saw machine)

During the operation of a reciprocating saw (sword saw machine), identifying potential risks and hazards is extremely important to ensure the safety of employees and the work environment. Some common risks may include:

First, the risk of injury to hands and fingers. A reciprocating saw is a powerful cutting tool, capable of causing serious injury if safety procedures are not followed. Not wearing adequate protection like gloves can lead to accidents.

Second, the risk of impact and abrasion. The components of a reciprocating saw can operate at high speeds, creating a lot of friction and heat. This can lead to material wear and a risk of fire if not properly controlled.

Third, the risk of accidents due to inexperienced users. Operating a reciprocating saw requires skill and experience. A user without sufficient knowledge of how to use it can lead to serious accidents.

B. Effective hazard prevention strategies when operating a reciprocating saw (sword saw machine)

1. Regular inspection and maintenance of the reciprocating saw (sword saw machine) for safe operation

To ensure the safe operation of a reciprocating saw (sword saw machine), regular inspection and maintenance are very important. This process helps to detect and fix technical problems before they cause dangerous incidents.

Before using a reciprocating saw, the operator should perform basic checks such as checking the power cord, power switch, and other parts of the machine to ensure they are working normally and are not damaged.

In addition, periodic maintenance is necessary to maintain the performance and safety of the machine. Maintenance activities may include cleaning the machine, lubricating moving parts, checking and adjusting the saw blade, as well as checking the safety system such as emergency stop sensors.

2. Adhere to occupational safety regulations for the safe operation of a reciprocating saw (sword saw machine)

To ensure the safe operation of a reciprocating saw (sword saw machine), adhering to occupational safety regulations is extremely important. This helps to protect the health and lives of employees and prevent serious accidents.

Before starting work, employees need to be trained on the safety rules for operating a reciprocating saw. This includes knowing how to use personal protective equipment fully and correctly, such as safety glasses, a mask, cut-resistant clothing, and gloves.

In addition, the operator must always follow the regulations on safe distances when working near an operating reciprocating saw. Do not wear jewelry or loose clothing when working with a reciprocating saw to avoid getting caught or entangled in the moving parts of the machine.

Monitoring and adhering to safety instructions is the responsibility of both the manager and the employees. In addition, regular training and reminders about safety regulations also help to raise awareness and compliance of everyone with protective measures.

3. Identify and mark the safe zone when operating a reciprocating saw (sword saw machine)

To ensure safety when operating a reciprocating saw (sword saw machine), identifying and marking the safe zone is very important. The safe zone is the area around the reciprocating saw that the operator and other employees are not allowed to enter while the machine is in operation.

Before starting work, the operator needs to identify the safe zone around the reciprocating saw. This is the necessary distance to avoid being hit or injured in the event the saw blade is operating.

Marking the safe zone can be done by using warning signs, lines, or specific location markers to indicate where others should not approach when the saw is in operation.

In addition, training and reminding employees about the safe zone is very important. Everyone in the work area needs to be informed about the safe zone and understand why they should stay away from this area while the reciprocating saw is in operation.

4. Use personal protective equipment when operating a reciprocating saw (sword saw machine)

When operating a reciprocating saw (sword saw machine), the use of personal protective equipment is extremely important to ensure the safety of the worker. Personal protective equipment such as safety glasses, a respirator mask, gloves, and cut-resistant clothing helps to protect the user from potential hazards during the operation of the reciprocating saw.

Safety glasses are an important piece of equipment to protect the worker’s eyes from wood chips, dust, and other materials that may be thrown during the wood cutting process. A respirator mask is also necessary to prevent the inhalation of wood dust and chemicals that can be harmful to the respiratory tract.

Cut-resistant gloves and a cut-resistant jacket made of specialized material with puncture and cut resistance help to protect the hands and body from dangers related to the saw blade. Ensuring that this equipment is used fully and correctly is very important to avoid accidents and injuries to the worker.

In addition, training and reminding workers about the importance of personal protective equipment is essential. Everyone involved in operating a reciprocating saw should be instructed and encouraged to fully comply with safety rules and to use the correct personal protective equipment to ensure all activities are carried out safely and effectively.

5. Emergency procedure and response in case of an incident when operating a reciprocating saw (sword saw machine)

When operating a reciprocating saw (sword saw machine), an emergency procedure and response in case of an incident are very important to ensure the safety of employees and to minimize losses. First, if an incident occurs such as an accident or an imminent danger, the operator should immediately turn off the machine’s power to prevent the situation from getting worse.

Then, they should immediately notify the manager or the responsible technician to report the incident and receive specific instructions on how to proceed. While waiting for assistance from the responsible person, the operator should maintain personal safety and not approach the incident area until permitted.

In addition, prior training on emergency procedures and response in case of an incident is extremely important. All employees involved in operating a reciprocating saw should be trained on how to deal with emergency situations to ensure a quick and effective response when needed.

6. Participate in occupational safety courses when operating a reciprocating saw (sword saw machine)

Occupational safety and health training is not only a legal requirement but also a commitment to the safety and health of workers. It helps employees recognize and deal with risks and hazardous situations, thereby minimizing accidents, injuries, or fatalities in their daily work.

The risk of accidents is always present and can happen at any time in the work environment due to human error and the inability to foresee every situation. This emphasizes the need for occupational safety training and constant vigilance.

When participating in occupational safety training at An Toan Nam Viet Center, workers will be methodically trained from theory to real-life risk scenarios. Accordingly, there will be measures to identify and prevent occupational accident risks that may occur during work. After the training course, trainees will take occupational safety tests to obtain an occupational safety certificate. From there, workers will have a clear understanding of safety knowledge as well as valid certification for work.

VI. Factors Affecting Occupational Safety when Operating a Reciprocating Saw (sword saw machine)

A. How weather conditions affect the operation of a reciprocating saw (sword saw machine)

Weather conditions can significantly affect the operation of a reciprocating saw (sword saw machine) and require the operator to be careful. In an outdoor environment, factors such as rain, snow, strong winds, or extremely high/low temperatures can cause problems during the use of the saw.

Rain and snow can wet the work surfaces, creating slippery conditions and reducing control of the machine. Strong winds can reduce visibility and create a risk of falling materials or other dangers. Extremely high temperatures can increase the risk of heatstroke and affect the worker’s concentration.

In addition, weather conditions can also affect the performance and lifespan of the reciprocating saw. High humidity can cause oxidation and rust on metal parts, while low temperatures can reduce the flexibility of mechanical parts.

B. How the working environment affects the operation of a reciprocating saw (sword saw machine)

The working environment has a significant impact on the operation of a reciprocating saw (sword saw machine) and requires the operator to take appropriate measures to ensure safety and performance. Some factors of the working environment that can have an impact include humidity, dust, lighting, and workspace.

High humidity can cause dampness in the parts of the reciprocating saw and reduce their durability. In addition, high humidity can also cause oxidation and rust on the metal parts of the machine.

Dust and a dirty environment can clog or damage the parts of the reciprocating saw, while also posing a health risk to the worker if wood dust or chemicals are inhaled during work.

Insufficient lighting or glare can reduce visibility and create a risk of accidents when operating a reciprocating saw.

A narrow workspace, lack of ventilation, or insufficient space to operate the machine can also create limitations during work.

C. How the technical condition of a reciprocating saw (sword saw machine) affects its operation

The technical condition of a reciprocating saw (sword saw machine) plays an important role in affecting its operation. If a reciprocating saw is not regularly maintained or has technical problems, the following issues may occur:

First, the performance of the machine may be reduced. If parts such as the saw blade, motor, or control system are not working properly, the machine will not cut wood effectively and there is a risk of errors or dangerous situations during operation.

Second, poor technical condition can lead to safety risks. For example, a saw blade that is not properly adjusted can cause material to fall or be thrown, posing a danger to workers nearby.

Third, a reciprocating saw that is not regularly maintained can lead to sudden incidents or breakdowns. Regular maintenance and inspection are necessary to ensure the machine operates stably and safely throughout its use.

D. How the safety knowledge and skills of the worker affect the operation of a reciprocating saw (sword saw machine)

The safety knowledge and skills of the worker play an important role in the operation of a reciprocating saw (sword saw machine). If the worker has sufficient safety knowledge and skills, they will be able to:

First, recognize and assess the potential risks when operating a reciprocating saw. Having knowledge of safety will help the worker to recognize dangerous situations and know how to deal with them to avoid accidents.

Second, apply personal protective measures correctly. A worker proficient in the skill of using personal protective equipment such as safety glasses, a mask, cut-resistant gloves, and a cut-resistant jacket will minimize the risk of injury during the operation of the reciprocating saw.

Third, adjust and operate the reciprocating saw safely and effectively. Skills in how to adjust the saw blade, maintain the machine, and use the control switches will help the worker to operate the machine accurately and safely.

VII. Occupational Safety Training on Skills for Safe Operation of a Reciprocating Saw (sword saw machine)

A. Why operators of reciprocating saws (sword saw machine) need to be trained in occupational safety

Operators of reciprocating saws need to be trained in occupational safety for many important reasons. Occupational safety training helps the operator to:

First, understand and recognize the potential hazards when operating a reciprocating saw. These hazards may include the risk of being cut, hit, inhaling wood dust, or the risk of fire if safety rules are not followed.

Second, know how to properly use personal protective equipment such as safety glasses, a respirator mask, cut-resistant gloves, and a cut-resistant jacket to protect themselves from dangers during work.

Third, have the skills to operate a reciprocating saw safely and effectively. Training helps the operator to understand how to control the machine, change the saw blade, and perform periodic maintenance measures to ensure the machine always operates stably and safely.

In addition, occupational safety training also helps to raise awareness of the regulations and laws related to occupational safety, thereby ensuring compliance with the regulations and minimizing the risk of accidents.

B. Where to get occupational safety training for operating a reciprocating saw (sword saw machine)?

An Toan Nam Viet is a reputable and high-quality occupational safety training center in Vietnam today. With occupational safety training sessions held continuously at production workshops, factories, or construction sites across the country (63 provinces in Vietnam).

To ensure the training is effective, An Toan Nam Viet prepares carefully and meticulously down to the smallest detail. From preparing tools, equipment, teaching aids to curriculum, materials, sound, and lighting.

The occupational safety training instructors at An Toan Nam Viet are experts with many years of experience in the field. They even have research projects identifying hazards in all industries and how to prevent them.

The instructors’ lectures are drawn from practice and conveyed in the most vivid and easy-to-understand way to the workers. These factors help workers feel comfortable during their study time and absorb the teaching knowledge well. Of course, the knowledge conveyed always closely follows Decree 44/2016/ND-CP. From there, they learn many measures to prevent hazards and how to protect themselves. At the same time, they also apply it most appropriately in their actual work.

VIII. The Significance of Occupational Safety in Operating a Reciprocating Saw (sword saw machine)

A. The importance of maintaining occupational safety in operating a reciprocating saw (sword saw machine)

Maintaining occupational safety in the operation of a reciprocating saw (sword saw machine) is very important because it directly relates to protecting the health and life of the worker. Here are the reasons why this is particularly important:

First, occupational safety reduces the risk of accidents. Using personal protective equipment correctly and following safety rules when operating a reciprocating saw helps to minimize the risk of injury during work.

Second, maintaining occupational safety enhances work performance. When workers feel safe and have favorable working conditions, they will be more focused on their work and minimize errors due to anxiety about safety.

Third, occupational safety brings long-term benefits to the organization. Maintaining a safe work environment helps to enhance the image and reputation of the organization, while also minimizing medical treatment costs and occupational accident insurance fees.

Finally, maintaining occupational safety is a legal and ethical obligation of every organization. Complying with occupational safety regulations is not only a legal responsibility but also a commitment to the sustainable development and social responsibility of the organization.

B. Important safety measures to know before operating a reciprocating saw (sword saw machine)

Before operating a reciprocating saw (sword saw machine), workers need to know important safety measures to ensure safety during work. Here is what you need to know:

First, inspect and maintain the machine periodically. Periodic maintenance helps to ensure the reciprocating saw operates stably and safely. Before use, check the saw blade, electrical system, and other parts of the machine to ensure they are working correctly.

Second, use full personal protective equipment. Before starting work, wear safety glasses, a respirator mask (if needed), cut-resistant gloves, and a cut-resistant jacket to protect your eyes, skin, and hands from dangers during operation.

Third, ensure the work area is clean and tidy. Remove unnecessary materials and keep the workspace clear, avoiding obstacles that could cause an accident.

Finally, always follow the safety rules when operating a reciprocating saw. Always stay focused and do not pay attention to distracting factors. Avoid operating the machine when tired or unfocused to ensure the safety of yourself and those around you.

Complete the occupational safety training course to be issued an occupational safety card by the safety training center to complete the required documentation for work.