Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Manual for Operating Construction Hoists

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENTATION SUITE (6 GROUPS, OVER 300 INDUSTRIES)

Discover essential occupational safety documents for operating construction hoists! Detailed instructions help you master the procedures, reduce risks, and protect yourself and your colleagues in a high-altitude work environment. Don’t miss this important information!

Table of Contents

PART I: CURRENT STATE OF SAFETY IN WORK RELATED TO CONSTRUCTION HOISTS

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some Occupational Accidents While Operating Construction Hoists

Operating a construction hoist is a job that requires great care and high professional skill. Below are some typical accidents that have occurred during the operation of construction hoists, to help you identify risks and prevent them effectively:

Incidents due to equipment failure: One of the most common accidents is an equipment failure such as a broken cable or a malfunction in the lifting system. This can cause the hoist to free-fall, leading to serious injuries for the workers.
Operator error: Accidents can also occur due to operator error, such as incorrect operation or failure to follow safety procedures. For example, not checking the equipment periodically or incorrect control can lead to dangerous situations.
Lack of synchronization between the hoist and the structure: A lack of synchronization between the hoist and the building structure can cause accidents. Incidents such as misalignment when lifting or lowering the hoist can lead to collisions or tipping over, endangering the workers.
Environmental factors: Environmental factors such as strong winds or bad weather can also lead to accidents when operating the hoist. These conditions can reduce control and cause incidents during operation.
Lack of preparation and training: Another important cause is the lack of adequate preparation and training for the operator. Not being familiar with safety and technical regulations can lead to unforeseen accidents.

Recognizing and preventing these risks is very important to protect safety at work. Ensure that all procedures and equipment are properly inspected and maintained to minimize the risk of accidents.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN OPERATING CONSTRUCTION HOISTS

I. Introduction

A. Overview of the importance of occupational safety when operating a Construction Hoist

Occupational safety when operating a construction hoist is not only a legal requirement but also an essential factor in protecting the health and lives of workers. Construction hoists are often used in high-rise construction projects, where the work requires absolute precision and care. Safety in the operation of the hoist plays an important role in minimizing risks and preventing serious accidents.

Adhering to safety regulations and performing periodic equipment checks helps to ensure that the hoist operates stably and effectively. This not only helps to protect the user but also creates a safer working environment for all employees on the construction site. At the same time, it is very important to provide full training and education for the hoist operator, helping them to master the necessary safety procedures and techniques to handle emergency situations.

When occupational safety is a top priority, it not only helps to protect the health and lives of workers but also contributes to improving work efficiency and minimizing financial losses from incidents. Therefore, investing in safety measures is an investment in the long-term sustainability and success of the project and the organization.

B. Important safety protocols and regulations when operating a Construction Hoist

Adhering to safety protocols and regulations when operating a construction hoist is extremely important to ensure the safety of workers and maintain work efficiency. First, the pre-use equipment inspection procedure is essential. Each hoist needs to be periodically inspected to detect and promptly rectify technical problems such as cables, motors, and control systems.

The hoist operator must also be well-trained on safety procedures and operating techniques. They need to master how to use the equipment, as well as how to handle any emergency situations that may arise. During operation, it is necessary to comply with regulations on load limits and travel speed to avoid incidents.

In addition, the use of personal protective equipment and ensuring that the area around the hoist is safely protected is also an important part of the safety procedure. All employees on the construction site need to be aware of the risks and take the correct preventive measures to minimize them. Maintaining a safe work environment not only protects workers but also contributes to the success of the project.

II. Components and Functions of a Construction Hoist

A. The different components of a Construction Hoist

A construction hoist is an important lifting device in high-rise construction projects, and it consists of many basic components that work in coordination with each other to ensure efficient and safe operation. At the core of the hoist is the main structural frame, which is usually made of high-strength steel, helping to keep the entire device stable and sturdy during operation.

The lifting system of the hoist includes a motor and a cable, which are primarily responsible for lifting and lowering the hoist. An electric or hydraulic motor provides the necessary power, while a steel cable or winch rope ensures smooth movement. The control components, including the control panel and sensors, allow the operator to control and monitor the hoist’s operation accurately.

The hoist is also equipped with protective devices such as an emergency brake and an alarm system to ensure safety in the event of an incident. Other components such as the entrance door and the work floor provide convenience and safety for the user when moving and working at height. All these components, when combined and properly maintained, help the hoist to operate stably, efficiently, and safely in a harsh working environment.

B. Structure and operating principle of a Construction Hoist

A construction hoist is a versatile lifting device designed to serve high-rise construction projects. The structure of the hoist mainly consists of a load-bearing steel frame, a lifting system, and control components. The steel frame is the main part responsible for ensuring the stability of the entire device. Installed on the project or a sturdy support structure, this frame helps to maintain the balance and safety of the hoist throughout its use.

The operating principle of the hoist is based on the lifting system and control mechanisms. The motor, which can be an electric or hydraulic motor, creates the necessary force to pull the cable or winch rope. The steel cable, attached to the motor and the hoist, performs the function of lifting and lowering the device accurately. The control system, including the control panel and sensors, allows the operator to control and adjust the hoist’s movements, ensuring efficient and safe operation.

When the hoist is in operation, the motor provides power to the cable, pulling the hoist up or down. The sensors and safety system always monitor the operating status to prevent incidents and protect the user. The perfect combination of these components helps the hoist to operate stably, meeting the needs of modern construction projects.

C. Applications in the construction industry of the Construction Hoist

Construction hoists play a crucial role in the construction industry, especially in high-rise buildings and infrastructure projects that require lifting materials and equipment to high floors. Thanks to their ability to lift and lower goods, equipment, and workers to high floors quickly and efficiently, construction hoists help save time and reduce labor costs.

In high-rise construction projects, construction hoists are often used to transport construction materials such as bricks, cement, and heavy equipment from the ground to the upper floors of the building. This not only improves work efficiency but also helps to maintain safety for workers by reducing the amount of goods that have to be moved by hand or through other means of transport.

Construction hoists also have applications in the installation and maintenance of the exterior structures of buildings such as glass, electrical systems, and plumbing systems. When the project is completed, the construction hoist can be used to perform maintenance and repair work, ensuring that the structures and systems are still functioning well.

Thanks to their flexible and efficient operation, construction hoists are an essential tool that helps to improve efficiency and safety in the construction industry, meeting the needs of modern and complex construction projects.

D. Risks associated with operating a Construction Hoist

Operating a construction hoist in the construction industry brings many benefits, but it also poses significant risks if not managed and implemented correctly. One of the main risks is a technical failure related to the equipment, such as a broken cable or motor, which can lead to a serious accident. This failure not only endangers the operator but can also disrupt the work, entailing repair and replacement costs.

Another risk is non-compliance with safety regulations, such as not performing periodic equipment checks or not following operating procedures. These errors can lead to the unstable operation of the hoist, increasing the risk of accidents. This is especially serious in a high-altitude work environment, where incidents can have serious consequences for both the user and those around.

In addition, environmental conditions can also affect the safety of operating the hoist. Bad weather such as strong winds or rain can reduce control and increase the risk of an incident. Therefore, it is very important to maintain caution and take preventive measures to ensure safety during the use of the hoist.

III. Safety Inspection and Maintenance Before Operating a Construction Hoist

A. Safety inspection before operating a Construction Hoist

A safety inspection before operating a construction hoist is a crucial step to ensure the equipment operates stably and to minimize the risk of accidents. Before starting work, the operator needs to perform a comprehensive inspection of the hoist’s components. This includes checking the main structural frame, the lifting components such as the cable and motor, as well as the control system. It is very necessary to ensure that all components are free of damage and are operating smoothly.

The safety inspection also includes verifying that protective devices such as the emergency brake and alarm systems are working correctly. These devices play an important role in preventing incidents and protecting the user in emergency situations.

In addition, it is equally important to assess the condition of the work environment. It is necessary to ensure that the area around the hoist is clear and free of obstacles, as well as to check the weather conditions to avoid hazardous factors.

Finally, performing these inspections not only helps to detect and rectify problems early but also creates a safer work environment for all employees on the construction site.

B. Periodic Maintenance Guide for a Construction Hoist

Periodic maintenance of a construction hoist is an essential factor in ensuring the equipment operates effectively and safely. The maintenance process begins with a general inspection of the entire system, including the mechanical, electrical, and control components. First, it is necessary to check the condition of the cable and winch rope, ensuring there are no signs of wear or damage. These cables must be replaced as soon as a decrease in performance or damage is detected to prevent a serious incident.

Next, the motor and drive system should be thoroughly inspected. Ensure that the motor is running smoothly and is not making any unusual noises. Periodic lubrication and oil changes should be performed according to the manufacturer’s instructions to keep the parts running smoothly.

The control system and protective devices such as the emergency brake should also be checked to ensure they are working correctly. The sensors and control panel should be periodically checked to ensure that all functions are operating according to technical requirements.

Finally, maintaining the hoist not only helps to extend the life of the equipment but also protects the safety of the user and improves work efficiency. Ensure that periodic maintenance is performed according to the schedule and instructions of the manufacturer to maintain the stable and safe operation of the hoist.

IV. Safe Operating Procedure for a Construction Hoist

A. Step-by-step guide on the safe operating procedure for a Construction Hoist

To ensure the safe and effective operation of a construction hoist, it is very important to follow a detailed procedure. First, the operator needs to perform a comprehensive equipment inspection. This includes checking the structural frame, cable, motor, and control system to confirm that all components are working well and show no signs of damage.

After inspection, it is necessary to perform the equipment startup step carefully. Before starting to lift or lower the hoist, make sure that all safety systems, including the emergency brake and alarm, are working correctly. It is necessary to check the work environment conditions to confirm that there are no obstacles or hazardous factors around the hoist’s operating area.

During operation, the user needs to continuously monitor the indicators and feedback from the equipment to detect any unusual signs early. Ensure that the load does not exceed the permissible limit and adjust the lifting and lowering speed to suit the work conditions. Finally, after completing the work, perform the safe equipment shutdown procedure, which includes lowering the hoist to its initial position and turning off the power.

Following a safe operating procedure not only helps to protect the user but also maintains the work efficiency of the hoist, ensuring the job is done effectively and safely.

B. Emergency handling measures and incident response mechanisms when operating a Construction Hoist

When operating a construction hoist, it is very important to be prepared for emergency situations to ensure safety and minimize damage. First, the operator needs to master the incident handling procedure to respond quickly and effectively. In the event of an incident such as a motor failure or a broken cable, the operator needs to immediately activate the emergency brake system to prevent the hoist from moving further, minimizing the risk of an accident.

Next, it is necessary to quickly notify the rescue team and relevant personnel of the incident so that they can come to the scene and provide timely support. At the same time, the operator should use the alarm devices and notify all workers in the area so they can move to a safe place.

In addition, it is also an important part of the incident response mechanism to perform regular inspections and maintenance according to the manufacturer’s instructions. These inspections help to detect technical problems early, minimizing the likelihood of a serious incident. Training and educating the operator on emergency situations and response procedures also contribute to improving the effectiveness of incident handling and protecting the safety of all employees on the construction site.

V. Risk Assessment and Hazard Management When Operating a Construction Hoist

A. Identifying potential risks and hazards in the operation of a Construction Hoist

Operating a construction hoist, while bringing many benefits to the construction industry, also poses significant risks and hazards if not managed closely. One of the main risks is a technical failure, such as a broken cable or motor, which can lead to the hoist losing control, endangering the user and the surrounding workers. A degradation or failure in the brake system can also lead to serious emergency situations.

In addition to technical issues, non-compliance with safety procedures is also a major hazard. This includes skipping pre-operation checks, not performing periodic maintenance, or not using personal protective equipment. These errors can increase the risk of accidents, affecting the safety of everyone on the construction site.

In addition, environmental conditions can also create hazards. Bad weather such as strong winds or rain can reduce the stability of the hoist and pose a risk of tipping or falling. Obstacles or unsafe conditions in the work area can also lead to serious accidents. Therefore, it is very important to identify and manage these risks to ensure the hoist’s operation is safe and effective.

B. Effective hazard prevention strategies when operating a Construction Hoist

1. Regular inspection and maintenance of the Construction Hoist for safe operation

To ensure the construction hoist operates effectively and safely, regular inspection and maintenance are indispensable. This process begins with a comprehensive inspection of the hoist’s components, including the structural frame, cable, motor, and control system. In particular, the cable and winch rope need to be thoroughly inspected to detect early signs of wear or damage, so that they can be replaced or repaired in a timely manner to avoid serious incidents.

Periodic maintenance also includes checking and replacing worn parts such as bearings, brakes, and oil filters. The motor and drive system should be regularly lubricated and have their oil changed according to the manufacturer’s instructions. This not only maintains operational efficiency but also extends the life of the equipment.

In addition to mechanical checks, it is necessary to perform a check of the control system and safety devices such as the emergency brake and sensors. Ensuring that all functions are working correctly helps to detect and prevent incidents before they become dangerous.

Finally, it is very important to maintain a detailed maintenance record and to follow a periodic inspection schedule to ensure the hoist is always in optimal and safe operating condition, protecting the user and maintaining work efficiency.

2. Adherence to occupational safety regulations for the safe operation of a Construction Hoist

Adherence to occupational safety regulations is a key factor in ensuring the safe and effective operation of a construction hoist. These regulations are established to minimize risks and protect the health of workers, while maintaining safety for the entire construction site.

Before starting to operate the hoist, the user needs to ensure that all safety procedures have been followed. This includes performing a comprehensive equipment inspection and confirming that safety components such as the emergency brake and alarm system are working correctly.

During operation, it is very important to follow the user instructions and load limits. Do not exceed the permissible load and adjust the lifting and lowering speed according to the work requirements to minimize the risk of an incident. At the same time, the operator must always maintain attention and monitor the hoist’s operating indicators to promptly detect any unusual signs.

In addition, it is very necessary to provide safety training for all employees and the hoist operator. Ensure that everyone understands the safety regulations, emergency response procedures, and how to use personal protective equipment.

Strict adherence to occupational safety regulations not only protects the health of workers but also maintains the stability and efficiency of the hoist’s operation, contributing to the success of the construction project.

3. Identifying and marking safety zones when operating a Construction Hoist

Identifying and marking safety zones when operating a construction hoist is a crucial step in protecting workers and ensuring the safety of the construction site. This involves clearly defining the area around the hoist and establishing the necessary safety measures to prevent incidents and accidents.

First, it is necessary to determine the operating range of the hoist, including the space required for lifting, lowering, and moving the equipment. This area should be clearly marked with barriers, warning signs, and demarcation lines to prevent unauthorized workers or vehicles from getting close to the equipment while it is in operation. These signs help to warn and remind everyone of the potential hazards and restricted areas.

In addition to marking the area around the hoist, it is also very important to designate and train employees on the safety zones. Employees need to be aware of the hazardous areas and comply with regulations on safe distances when the hoist is in operation.

At the same time, it is necessary to maintain a clean work area free of obstacles. It would be better if the work area is regularly inspected to ensure that the safety signs and barriers are always in good condition and easily recognizable.

Identifying and marking safety zones not only helps to prevent accidents but also creates a more organized and effective work environment, contributing to the success of the construction project.

4. Using personal protective equipment when operating a Construction Hoist

The use of personal protective equipment when operating a construction hoist is very important to protect workers from potential hazards and accidents that may occur. Personal protective equipment helps to minimize the impact of incidents and ensure the safety of the user during work.

First, a hard hat is an indispensable piece of equipment that helps protect the head from falling objects or impact. It needs to be chosen in the correct size and ensure quality for the highest protection effectiveness. In addition, safety gloves are also very important to protect the hands from cuts, abrasions, or contact with hazardous materials.

In a high-risk work environment, the use of safety glasses helps to protect the eyes from dust, debris, and liquids that can be harmful. Safety shoes with steel toes or puncture-resistant material help to protect the feet from falling heavy objects or sharp objects on the ground.

Besides, other protective equipment such as safety harnesses and reflective vests should also be used when working at height or in low-light conditions. This equipment helps to increase visibility and prevent the risk of falling.

Compliance with regulations on the use of personal protective equipment not only ensures the safety of workers but also creates a more professional and organized work environment. Ensure that all protective equipment is always inspected and periodically maintained to maintain its protective effectiveness and optimal safety during the operation of the hoist.

5. Emergency procedures and response in case of an incident when operating a Construction Hoist

When an incident occurs during the operation of a construction hoist, a prompt and effective response according to the emergency procedure is extremely important to protect the safety of all employees on the construction site. This procedure begins with the operator immediately activating the emergency brake system to stop the hoist’s operation, to minimize the risk of accidents and loss of control.

After the equipment has stopped, the next step is to notify the rescue personnel and relevant departments. Use communication devices and alarm systems to warn everyone in the area of the incident. This helps to prevent panic and ensures that everyone can move to a safe place quickly.

While waiting for help, the operator should check the condition of the equipment and identify the cause of the incident if possible. This will help the rescue team to have a better understanding of the situation and to propose appropriate handling measures. At the same time, a report should be made to record information about the incident to serve the investigation and to improve the safety procedure in the future.

Finally, after the incident has been resolved, it is necessary to evaluate and improve the emergency response procedure. Retraining employees on emergency procedures and updating safety instructions will help to improve the ability to respond to similar situations in the future, contributing to a safe and effective work environment.

6. Participate in occupational safety training courses when operating a Construction Hoist

Occupational safety and health training is not only a legal requirement but also a commitment to the safety and health of workers. It helps employees recognize and deal with hazards and dangerous situations, thereby minimizing accidents, injuries, or fatalities in their daily work.

The risk of accidents is always present and can occur at any time in the work environment due to the possibility of human error and the unpredictability of all situations. This emphasizes the need for continuous occupational safety training and vigilance.

When participating in occupational safety training at Nam Viet Safety Training Center, workers will be thoroughly trained from theory to real-life risk scenarios. Accordingly, there will be measures to identify and prevent occupational accident risks that may occur during work. After the training course, trainees will take occupational safety tests in order to obtain an occupational safety certificate. From there, workers will have a clear understanding of safety knowledge as well as a valid certification for work.

VI. Factors Affecting Occupational Safety When Operating a Construction Hoist

A. How weather conditions affect the operation of a Construction Hoist

Weather conditions play a significant role in the operation of a construction hoist and can greatly affect safety and work efficiency. Strong winds, especially in high areas or outdoor construction sites, can reduce the stability of the hoist, causing it to sway or rock. This not only increases the risk of losing control of the equipment but also affects the safety of workers in the area.

Rain and wet weather also create serious risks. A wet surface can reduce the grip of the hoist and increase the risk of slipping or falling. Rainwater can reduce the efficiency of the electrical and mechanical systems, leading to the risk of failure and technical problems. Besides, heavy rain can increase the risk of landslides or floods, affecting the stability of the construction site.

Extreme temperatures are also a factor to consider. An excessively high temperature can reduce the durability of the materials that make up the hoist, while an excessively low temperature can reduce the efficiency of the oil and lubricants, affecting the operation of the mechanical parts.

Therefore, it is very important to monitor weather conditions and adjust the work plan accordingly. Preventive measures such as checking the equipment before operation and suspending work when weather conditions are not favorable will help to protect the safety of workers and maintain the work efficiency of the hoist.

B. How the working environment affects the operation of a Construction Hoist

The working environment has a profound impact on the operation of a construction hoist, affecting both the efficiency and safety of the equipment. Environmental factors such as humidity, temperature, and the level of dirt can all have a significant impact on the hoist’s operation.

High humidity and a wet environment can increase the wear and tear of the mechanical parts and reduce the efficiency of the electrical systems. Water can enter the equipment, causing problems or damage if not controlled and properly maintained. Meanwhile, a dry and dusty environment can lead to the accumulation of dust in the parts, reducing operational efficiency and requiring frequent cleaning.

The ambient temperature also plays an important role. An excessively high temperature can reduce the durability of the materials that make up the hoist and cause deformation, while an excessively low temperature can reduce the viscosity of the lubricating oil, affecting the smooth operation of the equipment. This is especially important in outdoor work environments or in areas with harsh climates.

In addition, a work environment with many obstacles or a narrow space can also make it difficult to operate the hoist, reducing its mobility and increasing the risk of collision.

Therefore, it is very important to assess the work environment before starting to operate the hoist and to take appropriate adjustment measures to ensure the equipment operates efficiently and safely.

C. How the technical condition of the Construction Hoist affects its operation

The technical condition of a construction hoist plays a decisive role in ensuring the safety and efficiency of operating the equipment. A hoist that is poorly maintained or has a technical problem can lead to many serious risks, from a decrease in work efficiency to the risk of an accident.

The main components of a hoist, such as the lifting system, brake, and control mechanism, need to be periodically inspected and maintained to ensure they are operating smoothly. If these components are worn, damaged, or malfunctioning, the hoist may have difficulty maintaining a stable load and precise control. This not only reduces work efficiency but also increases the risk of accidents.

The electrical system and sensors also play an important role in the operation of the hoist. A problem with the electricity or an inaccurate sensor can lead to a false alarm or a failure to recognize errors in the operating process. This reduces the ability to detect incidents in a timely manner and increases the risk of serious incidents.

Furthermore, a technical condition check also includes confirming the integrity of the hoist’s structure and mechanical connections. Cracks, damage, or weaknesses in the structure can reduce the durability and stability of the hoist, directly affecting safety during operation.

Therefore, it is very necessary to maintain and check the technical condition of the hoist to ensure the equipment operates efficiently and to minimize the risk of accidents, while protecting the safety of workers and improving the work efficiency.

D. How the safety knowledge and skills of workers affect the operation of a Construction Hoist

The safety knowledge and skills of workers are a decisive factor in operating a construction hoist safely and effectively. Those who operate a hoist need to be well-trained on safety procedures and operating techniques to be able to handle situations that arise accurately.

Safety knowledge helps workers to recognize and respond to potential risks when operating a hoist. An understanding of safety regulations, incident prevention measures, and emergency procedures helps them to perform their work more safely, and at the same time limit the risk of accidents.

The skill of operating a hoist includes the ability to control the equipment, understand and follow the steps in the operating procedure, as well as the ability to handle incidents when necessary. A worker with good skills will be able to maintain the equipment’s stable operation, ensuring the safety of themselves and their colleagues.

Furthermore, it is very important to have good skills in the maintenance and periodic inspection of the equipment. This helps to detect technical problems early and to avoid serious incidents that may occur during operation.

Therefore, regular training and improvement of knowledge and skills for workers not only ensures safety at work but also contributes to improving the operational efficiency of the hoist, creating a safer and more professional work environment.

VII. Occupational Safety Training on Skills for Safe Operation of a Construction Hoist

A. Why operators of Construction Hoists need to be trained in occupational safety

Occupational safety training for construction hoist operators is an indispensable factor in ensuring the safety and efficiency of the work process. A construction hoist, with its complex structure and diverse functions, requires the operator to have a deep knowledge of the procedures and operating techniques to avoid potential risks.

The training helps the operator to understand the safety regulations, know how to recognize and prevent risks in the operating process. Those who have been trained are able to perform equipment checks before use, handle incidents in a timely manner, and respond to emergency situations effectively. This not only protects the health and lives of workers but also helps to prevent property damage and minimize the risk of causing accidents to colleagues.

Furthermore, safety training improves the confidence and skill of the operator, thereby improving work efficiency. When fully equipped with knowledge and skills, the operator will perform the job accurately, reducing errors and enhancing work efficiency. This also contributes to creating a safe work environment, minimizing disruptions, and improving work productivity.

In summary, occupational safety training is a basic factor that helps to ensure the safety of the construction hoist operator and all employees working on the construction site, and at the same time contributes to improving the efficiency and quality of the work.

B. Where to get occupational safety training for operating a Construction Hoist?

An Toan Nam Viet is a prestigious and high-quality occupational safety training center in Vietnam today. With occupational safety training sessions held continuously at production workshops, factories, or construction sites across the country (63 provinces in Vietnam).

To ensure the effectiveness of the training, An Toan Nam Viet prepares carefully and meticulously, down to the smallest detail. From preparing tools, equipment, teaching aids to textbooks, materials, sound, and lighting.

The occupational safety training instructors at An Toan Nam Viet are experts with many years of experience in the field. They even have research projects identifying hazards in all industries and how to prevent them.

The instructors’ lectures are drawn from practice and conveyed in the most vivid and easy-to-understand way to the workers. These factors help workers feel comfortable during their studies and absorb the teaching knowledge well. Of course, the knowledge conveyed always adheres to Decree 44/2016/ND-CP. From there, they learn many measures to prevent hazards and how to protect themselves. At the same time, they also apply it most appropriately in their actual work.

VIII. The Significance of Occupational Safety in Operating a Construction Hoist

A. The importance of maintaining occupational safety in operating a Construction Hoist

Maintaining occupational safety in the operation of a construction hoist is extremely important to ensure the safety of workers and the efficiency of the work. A construction hoist, with its function of lifting and transporting materials at construction sites, often faces many risk factors, from technical failures to risks from the work environment.

Maintaining safety not only protects the health and lives of workers but also helps to reduce property damage and prevent serious incidents that can disrupt work. When safety procedures are strictly followed, including inspection and periodic maintenance, training the operator, and implementing preventive measures, the risk of accidents and incidents will be significantly reduced.

Occupational safety also contributes to improving work efficiency. When the hoist operates safely and effectively, the work will be carried out more smoothly, reducing downtime and enhancing productivity. In addition, a safe work environment will promote a positive work spirit and the satisfaction of employees, creating a professional and reliable work atmosphere.

In summary, maintaining occupational safety in the operation of a construction hoist is not only a legal responsibility but also an important factor in protecting workers, maintaining work efficiency, and ensuring the success of the construction project.

B. Important safety measures to be aware of before operating a Construction Hoist

Before operating a construction hoist, it is extremely important to be aware of safety measures to ensure the safety and efficiency of the work process. First, the operator needs to perform a comprehensive equipment inspection to identify factors such as the mechanical condition, electrical system, and safety components, whether they are working properly or not. This helps to detect any problems or damage early that could be dangerous during operation.

In addition to equipment inspection, understanding and complying with safety regulations is a key factor. The operator needs to be fully trained on safety procedures, risk prevention measures, and how to handle incidents. A thorough preparation in terms of knowledge and skills will help workers to respond effectively to any emergency situations that may arise.

The work environment also needs to be carefully considered. It is necessary to ensure that the area around the hoist has been cleaned and that obstacles have been removed to avoid obstruction during operation. Marking and identifying the safety zones around the hoist is also an important part of protecting workers and preventing accidents.

Finally, it is necessary to ensure that the operator and related personnel are all using personal protective equipment correctly. The workforce must be fully equipped and use protective equipment such as hard hats, gloves, and safety harnesses to minimize risks and protect their health.

These safety measures help to create a safe and effective work environment, and at the same time, reduce the risk of accidents and incidents in the process of operating the hoist.

Complete the occupational safety training course to be issued an occupational safety card by the occupational safety training center to strengthen your records in accordance with regulations when working.

PART III: Further Reference