Bài kiểm tra an toàn lao động trong môi trường xây dựng

The test results will be sent to your Email. Please fill in the information completely.

Download multiple choice test on labor safety in construction
Construction safety training documents
Certified labor safety training service in construction
Answers to the Construction Safety Training test are in the email we sent after you finished the test.

See more What is labor safety training?
(Rate us here)

Full name

Company

Question 1: Which of the following subjects are required to receive occupational safety and hygiene training according to Decree 44/2016 issued by the Ministry of Labor, War Invalids and Social Affairs in 2016?

a) People who are working.

b) Apprentices and trainees.

c) People on probation.

d) Sentences a, b and c are correct.

Question 2: According to the Law on Labor Safety and Hygiene (No. 84/2015/QH13), how many rights and obligations do employees under labor contracts have?

a) 3 rights, 3 obligations.

b) 4 rights, 4 obligations.

c) 6 rights, 3 obligations.

d) 3 rights, 6 obligations.

Question 3: When clearly seeing that the job or workplace has a risk of occupational accidents, seriously threatening their life and health. Employees have the right to:

a) Refuse work or leave the workplace and immediately notify the person in charge.

b) Automatically leave the above workplace and go to work elsewhere.

c) Only continue working when those risks have been overcome.

d) Sentences a and c are correct

Question 4: Causes of work accidents due to falls from height include:

a) Organizational reasons

b) Technical reasons

c) No labor safety supervisor

d) Sentences a and b are correct

Question 5: At what height during construction must workers use safety belts?

a) Height from 2 m or more above the working floor.

b) Not reaching a height of 2 m but when required because the area below has many obstacles or is near dangerous trenches, holes, etc.

c) It does not matter if the worker feels safe or has experience.

d) Sentences a and b are correct

Question 6: At a height of 20-70m, objects can fall down. The limit of the danger zone that can fall from above is at a distance of (for construction works calculated from the outer perimeter) (TCVN 5308:91)

a) 5m

b) 7m

c) 10m

d) Sentences a, b and c are all wrong.

Question 7: When making a working floor, the railing must have a height of: (QCVN 18-2014 BXD)

a) 1m high railing

b) 1.2m high railing

c) 0.8 m high railing

d) Sentences a, b and c are all wrong.

Question 8: To be safe when working on the roof, workers must

a) Use proper and adequate personal protective equipment. Meet the requirements for working at height.

b) Adequate planks and ladders when necessary. Only work after there is a 2-3m wide barrier and a prohibition sign below.

c) Only work with quality tested roof tiles and panels.

d) Sentences a, b and c are all correct.

Question 9: To prevent falling rocks and soil, when excavated from the hole, they must be placed at least 2 meters away from the edge of the hole or trench.

a) 0,4m.

b) 0,5m.

c) 1,0m.

d) Optional.

Question 10: Scaffolding must not be used when

a) Scaffolding with materials that do not meet technical requirements according to standards. There are deformations, cracks, wear, rust or missing parts.

b) After the rain, the scaffolding surface is slippery.

c) Scaffolding not licensed for work.

d) Sentences a, b and c are all correct.

Question 11: When moving mobile scaffolding, it is necessary to ensure

a) There must be no obstacles on the way.

b) Do not allow people, materials, hand tools or other equipment onto the working floor while the scaffolding is moving.

c) The height of the scaffolding must not be greater than twice the smallest side of the base.

d) Sentences a, b and c are all correct.

Question 12: The parts of mechanical equipment that easily cause work accidents are:

a) Reverse moving parts, rotating parts, uncovered parts located between rotating parts of the equipment.

b) Due to clamp rolling, splashing and breaking often appear in rotating moving parts.

c) Sentences a and b are both correct.

d) Sentences a and b are both wrong.

Question 13: When an electric shock accident occurs, which of the following should be done?

a) Separate the victim from the power source and take the victim to the hospital.

b) Quickly cut off the power source and perform first aid using artificial respiration.

c) Quickly separate the victim from the power source, take the victim to a ventilated area, check the victim's condition, perform first aid, and call an ambulance.

d) All of the above statements are correct.

Question 14: Safety measures for workers when working in areas with pits and trenches are:

a) Workers going up and down deep holes must have sturdy ladders.

b) The road must have barriers. There must be traffic lights at night.

c) Sentences a and b are both correct.

Question 15: To be safe, how high should the edge of the scaffolding work floor be to prevent objects from falling?

a) 45cm.

b) 15cm.

c) 30cm.

d) Optional.

Occupational Safety Multiple-Choice Test in the Construction Environment

The test results will be sent to your Email. Please fill in the information completely.

An Toan Nam Viet

Leave a Reply Cancel reply

antoannamviet.com

Company Information

Terms and Legal

SERVICE PRODUCT REVIEW

The test results will be sent to your Email. Please fill in the information completely.

An Toan Nam Viet

Leave a Reply Cancel reply

antoannamviet.com

Company Information

Terms and Legal

Login

Register