Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Document for Non-Stick Pan Manufacturing

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, OVER 300 PROFESSIONS)

Discover the detailed occupational safety document for non-stick pan manufacturing! Ensure a safe work process, reduce the risk of accidents, and enhance work efficiency. Let’s apply protective measures and ensure optimal safety for your team.

Table of Contents

PART I: CURRENT STATE OF SAFETY WORK IN THE NON-STICK PAN MANUFACTURING INDUSTRY

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents in non-stick pan manufacturing plants

In the non-stick pan manufacturing industry, occupational accidents can occur if safety measures are not fully adhered to. Some common accidents include:

Burns and fires: Due to contact with high temperatures from heating equipment or chemicals, workers can suffer severe burns.
Mechanical injuries: Using heavy machinery or getting caught in equipment can lead to broken bones, dislocations, or other serious injuries.
Chemical poisoning: Long-term exposure to chemicals used in the production process can cause respiratory problems or severe poisoning.
Electricity-related accidents: Electrical leaks or problems with the electrical system can lead to electric shock or explosions.

These incidents highlight the importance of adhering to safety and labor protection regulations. Regular training, equipment checks, and maintaining a safe work environment are necessary to minimize accident risks.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN WORKING IN A NON-STICK PAN MANUFACTURING PLANT

I. Occupational safety and health for Pressing and Forming staff

1. Characteristics of Pressing and Forming work

The pressing and forming stage in non-stick pan manufacturing is a crucial step to shape the product to the desired size and style. During this stage, raw materials like aluminum or stainless steel are fed into a pressing machine, where they undergo compression and shaping. The press uses high pressure to create pan layers with precise dimensions and shapes.

The pressing process not only creates the basic shape of the pan but also ensures the product’s uniform thickness and structure. Precision in this stage is vital to ensure that the final pans have consistent quality and meet technical requirements. Workers in this stage must pay attention to adjusting the machinery and conducting thorough checks to avoid errors that could affect the product’s quality. This step serves as the foundation for creating perfect non-stick pans, ready for the subsequent stages in the production process.

2. Types of occupational accidents during the Pressing and Forming process

During the pressing and forming of non-stick pans, several occupational accidents can occur due to the complexity and high pressure of this stage. Workers often face the risk of getting trapped or pulled into the pressing machine, especially with incorrect operation or inadequately maintained equipment. Direct contact with fast-moving machine parts can lead to serious injuries such as fractures, dislocations, or cuts and lacerations.

Additionally, working in a high-temperature and high-pressure environment can also cause burns or injuries due to unsafe work practices. The risk of noise cannot be overlooked, as loud noise from the pressing machine can lead to hearing damage if ear protection is not used.

To minimize these accidents, implementing strict occupational safety measures and regular training for workers is essential. Ensuring that all equipment is regularly inspected and maintained, and that workers are fully equipped with personal protective equipment, can help reduce risks and create a safer working environment.

3. Causes of occupational accidents during Pressing and Forming

Occupational accidents in the pressing and forming stage of non-stick pans often stem from several main causes. One of the leading causes is the lack of proper equipment maintenance and inspection. When a pressing machine is not correctly maintained, parts can fail or operate erratically, creating an accident risk for workers.

Incorrect operation by workers is also a significant factor. Failure to follow the correct machine operating procedures can lead to incidents, such as getting trapped or pulled into the press. Additionally, a lack of concentration or inexperience in adjusting the machine can increase the risk of accidents.

The work environment also contributes significantly. A noisy, high-temperature, and high-pressure work environment can cause stress for workers, reducing their ability to concentrate and react quickly when an incident occurs.

Finally, the lack of use of personal protective equipment also increases the risk of accidents. When workers do not wear proper protection, such as gloves, safety glasses, or non-slip shoes, they are more likely to be injured while working with heavy machinery and high pressure. To minimize these risks, it is very important to fully implement safety measures and provide training for workers.

4. Measures to prevent occupational accidents during Pressing and Forming

To prevent occupational accidents in the pressing and forming stage of non-stick pans, implementing safety measures is extremely important. First and foremost, the company must ensure all machinery is regularly maintained and inspected to detect any malfunctions or signs of problems early. Equipment maintenance not only keeps the machinery operating stably but also minimizes the risk of accidents.

Workers also need to be properly trained on the operating procedures for the pressing machine, as well as safety measures. Training helps workers master how to use the equipment and identify potential hazards, thereby preventing incidents. In addition, providing full personal protective equipment, such as cut-resistant gloves, safety glasses, and non-slip shoes, helps protect workers from dangers in the work environment.

Furthermore, maintaining a clean work environment and organizing regular safety inspections are also important factors. A scientifically organized and clean work environment helps minimize accident risks and increases work efficiency. By implementing these measures, businesses can create a safe working environment and minimize the risk of occupational accidents.

5. Occupational safety regulations for Pressing and Forming

In the pressing and forming stage of non-stick pans, adhering to occupational safety regulations is a key factor in ensuring a safe and effective work environment. First, workers must be fully trained on machine operating procedures and safety measures. Regulations require every worker to understand how to use the equipment and identify potential hazards.

Machinery must be regularly inspected and maintained according to regulations to ensure it operates stably and does not pose a danger. Regular maintenance not only keeps the machinery operating efficiently but also helps to detect and fix problems early that could lead to accidents.

Workers must also be fully equipped with personal protective equipment, such as gloves, safety glasses, and non-slip shoes, and this equipment must always be checked to ensure it meets safety standards. Regulations also require maintaining a clean work environment, free of obstacles or hazards.

In addition, companies need to conduct regular safety inspections and training sessions to remind workers of safety regulations, while encouraging immediate reporting of any hazards or incidents. Adherence to these regulations not only protects the health of workers but also ensures the production process runs smoothly and effectively.

6. Handling emergency occupational accident situations during Pressing and Forming

When an occupational accident occurs during the pressing and forming of non-stick pans, handling the emergency situation quickly and accurately is very important to minimize damage and protect workers’ health. First, workers and on-site staff need to immediately stop the machinery’s operation to prevent further injuries. This helps to avoid subsequent incidents and creates a safer condition for handling the situation.

Next, medical staff or trained first-aid personnel on site should quickly approach and assess the victim’s condition. Providing initial first aid, such as stopping bleeding, cleaning wounds, or providing respiratory support, is essential for stabilizing the worker’s condition before transferring them to a professional medical facility.

In parallel with handling the medical situation, it is necessary to immediately notify the relevant authorities and company management to carry out investigation and accident reporting measures. The investigation process will help determine the cause of the accident and propose improvement measures to prevent similar incidents in the future.

Finally, after the situation is resolved, the company needs to take steps to re-evaluate the work process and update safety measures to enhance prevention capabilities. Ensuring that all workers are trained on the emergency response process will help them be ready to respond effectively to accident situations in the future.

II. Occupational safety and health for Surface Treatment staff

1. Characteristics of Surface Treatment work

The surface treatment stage is a crucial step in the non-stick pan manufacturing process, aimed at preparing the pan’s surface for the application of the non-stick coating. After the pan is formed, its surface needs to be carefully treated to ensure the non-stick coating adheres firmly and has high durability. The work begins with cleaning the pan’s surface, removing all dirt, grease, and impurities that could affect the quality of the non-stick coating.

Next, the pan is polished to smooth the surface and remove minor imperfections. Polishing not only helps the pan look good but also creates a smooth surface, helping the non-stick coating to adhere better. After that, the pan’s surface undergoes a chemical treatment process, in which special chemicals are used to prepare the surface for the non-stick coating. Chemical treatment helps improve the bonding ability of the non-stick coating and enhances the pan’s corrosion resistance.

Each step in the surface treatment process needs to be performed with precision and attention to ensure the quality of the final product. This not only affects the pan’s performance but also determines the safety and durability of the non-stick coating.

2. Types of occupational accidents during the Surface Treatment process

During the surface treatment of non-stick pans, various types of occupational accidents can occur due to interaction with chemicals and machinery. One of the common risks is exposure to harmful chemicals during the chemical treatment stage. Workers can suffer chemical burns or experience respiratory problems if they do not use adequate personal protective equipment. The chemicals used in this process can cause irritation to the skin, eyes, or respiratory system upon direct contact.

Additionally, during the cleaning and polishing stages, accidents can arise from the use of mechanical equipment such as polishing machines or high-pressure sprayers. Workers can suffer cuts, abrasions, or fractures if they do not follow the correct machine operating procedures or do not use safety protection. These accidents often occur due to carelessness in operating the equipment or because the equipment is not properly maintained.

The work environment can also create other hazards, such as slipping on chemicals or water, leading to accidents like falls. To minimize these risks, implementing strict safety measures, training workers on safety procedures, and ensuring the full use of protective equipment are very important.

3. Causes of occupational accidents during Surface Treatment

Occupational accidents during the surface treatment of non-stick pans often stem from several main causes related to interaction with chemicals and machinery. A common cause is direct contact with harmful chemicals during the chemical treatment stage. When workers are not fully equipped with protective gear or when chemicals are not handled properly, the risk of chemical burns or skin and eye irritation increases significantly.

The lack of training and practice in safety procedures also plays a crucial role. If workers are not adequately instructed on how to use equipment and chemicals, or are not aware of incident handling measures, they are prone to accidents such as abrasions, burns, or other injuries. Cleaning and polishing equipment, if not regularly maintained or used incorrectly, can cause dangerous incidents, leading to occupational accidents.

Environmental factors at work, such as slippery floors due to chemicals, also contribute to causing accidents. These hazards can cause workers to slip and fall or suffer other injuries if a clean and safe work environment is not maintained. To minimize these causes, adherence to safety regulations, proper training, and regular equipment maintenance are very important.

4. Measures to prevent occupational accidents during Surface Treatment

To prevent occupational accidents during the surface treatment of non-stick pans, implementing safety measures is extremely important. First and foremost, workers need to be thoroughly trained on safety procedures while working with chemicals and machinery. This helps them understand the potential risks and know how to respond correctly in an emergency.

Using personal protective equipment is an essential measure. Workers should always wear chemical-resistant gloves, safety glasses, and respiratory masks when working with cleaning agents and treatment chemicals. Besides, ensuring that all work equipment, including cleaning and polishing machines, is regularly maintained and inspected to detect potential failures early is crucial.

The work environment also needs to be maintained clean and safe. Immediately cleaning up any chemical spills or dirt on the floor helps prevent slips and accidents. Ensuring the ventilation system works well also helps reduce the risk of exposure to harmful chemical vapors.

Finally, implementing regular safety inspection procedures and organizing training sessions on occupational safety will enhance workers’ awareness and skills, thereby helping to minimize the risk of accidents and create a safer working environment.

5. Occupational safety regulations for Surface Treatment

In the surface treatment process of non-stick pans, adhering to occupational safety regulations is very important to protect workers’ health and ensure product quality. The first regulation requires that workers be fully trained on safety procedures related to cleaning, polishing, and chemical treatment. This training includes the proper use of personal protective equipment and how to handle emergency situations.

Machinery must be regularly maintained and inspected to ensure safe operation. Equipment such as polishing machines and chemical sprayers need to be regularly checked to detect any potentially dangerous malfunctions early. The regulations also require workers to follow safety procedures when using chemicals, including reading the user instructions carefully and adhering to protective measures, such as wearing gloves, safety glasses, and respiratory masks.

The work environment also needs to be maintained clean and safe. Regulations require companies to ensure the ventilation system operates effectively to minimize the risk of exposure to chemical vapors. At the same time, workers must immediately clean up any liquid or dirt on the floor to avoid slipping. These regulations help create a safe working environment and minimize the risk of occupational accidents during the surface treatment of non-stick pans.

6. Handling emergency occupational accident situations during Surface Treatment

When an occupational accident occurs during the surface treatment of non-stick pans, a quick and accurate response is very important to minimize damage. If the accident involves chemicals, the first thing is to immediately stop the related activities and ensure the affected area is well-ventilated. Workers exposed to chemicals should receive immediate first aid, including washing the chemical off the skin with clean water or using treatment measures as directed by the chemical manufacturer.

If the accident involves mechanical equipment, such as a polishing or cleaning machine, the power to the equipment must be cut immediately to prevent further injuries. Workers should be provided with basic first aid, such as treating wounds and checking for signs of serious injury.

After handling the emergency situation, it is necessary to immediately notify medical authorities and company management to ensure the worker is transferred to a professional medical facility if needed. At the same time, an investigation should be conducted to determine the cause of the accident and implement corrective measures.

Finally, the company should organize retraining sessions for workers on safety procedures and emergency response steps, to enhance their response capabilities and minimize the risk of future accidents.

III. Occupational safety and health for staff Applying the non-stick coating

1. Characteristics of Applying the non-stick coating work

Applying the non-stick coating is a crucial step in the non-stick pan manufacturing process, aimed at ensuring the final product has good non-stick properties and high durability. During this stage, the non-stick coating is applied to the pan’s surface using one of three main methods: spraying, rolling, or dipping.

The spraying method is often used to apply the non-stick coating evenly and smoothly onto the pan’s surface. This process requires specialized spraying equipment and precise adjustment techniques to ensure the non-stick coating adheres firmly and does not run or clump.

The rolling method is another technique. In this, the non-stick coating is created by rolling it over the pan’s surface with a special roller. This is an effective way to achieve an even coating and control the thickness of the non-stick layer.

Finally, the dipping method is when the pan is immersed in a non-stick solution. This method helps the non-stick coating to adhere optimally to the pan’s surface, especially when a thick or uniform coating is needed.

Each method has its own advantages and requirements, and the choice of the appropriate method depends on the type of pan, technical requirements, and final quality goals. In all cases, precision and attention to detail in every step are very important to ensure the non-stick coating achieves the highest quality and extends the product’s lifespan.

2. Types of occupational accidents during the Applying the non-stick coating process

During the process of applying the non-stick coating to the pan’s surface, several types of occupational accidents can occur due to interaction with chemicals and machinery. One of the main risks is exposure to non-stick chemicals, which can cause skin burns, eye irritation, or respiratory problems if the correct protective equipment is not used. Accidents such as chemical burns often occur when workers do not follow safety procedures in preparing and applying the non-stick coating, or when the chemicals are not stored and handled correctly.

In addition, during the use of spraying, rolling, or dipping equipment, workers may encounter mechanical accidents. For example, spraying equipment can create high pressure, leading to the risk of being sprayed with chemicals or accidents due to equipment failure. In the case of using rollers, if the equipment is not adjusted correctly or regularly maintained, it can cause injuries such as cuts or impacts.

Accidents can also occur due to a poorly controlled work environment, such as slippery floors from chemical leaks, causing a risk of slipping and falling. To minimize these accidents, strict adherence to safety measures and training workers on safe work procedures are very important.

3. Causes of occupational accidents when Applying the non-stick coating

Occupational accidents during the process of applying the non-stick coating often stem from several main causes related to chemicals, equipment, and work procedures. A common cause is direct contact with the non-stick chemical. This chemical often contains toxic or irritating components, and if workers do not wear full personal protective equipment such as gloves, goggles, or masks, they may suffer chemical burns or respiratory problems.

Another cause is equipment failure. During the spraying, rolling, or dipping of the non-stick coating, using substandard or irregularly maintained equipment can lead to serious incidents. For example, spraying equipment can have pressure or leakage problems, while rollers or dipping tanks can have technical issues that cause mechanical accidents or unsafe contact with chemicals.

The work environment also plays a significant role in causing accidents. Wet floors from chemical leaks can increase the risk of slipping and falling, while a cramped and poorly lit workspace can lead to accidents due to collisions or mistakes in using equipment. To limit these risks, implementing strict safety measures and regular equipment checks are essential.

4. Measures to prevent occupational accidents when Applying the non-stick coating

To prevent occupational accidents during the process of applying the non-stick coating to the pan’s surface, implementing safety measures is extremely important. First of all, workers need to be fully trained on safe work procedures and how to use chemicals correctly. The use of personal protective equipment such as gloves, safety glasses, and respiratory masks is mandatory to minimize the risk of direct contact with harmful chemicals.

The company also needs to ensure that all equipment, including spraying machines, rollers, and dipping tanks, is regularly maintained and inspected to ensure stable and safe operation. In particular, the equipment must be adjusted accurately to avoid incidents such as leaks or uncontrolled pressure. In case of equipment failure, there should be a clear emergency response plan and incident handling procedure.

The work environment also needs to be well-controlled to reduce the risk of accidents. The floor must be kept dry and clean to avoid slipping, and the workspace needs adequate lighting so that workers can work safely. In addition, conducting regular safety inspections and reviewing work procedures will help to identify potential risks early and improve working conditions, thereby minimizing the possibility of occupational accidents.

5. Occupational safety regulations when Applying the non-stick coating

When applying the non-stick coating to the pan’s surface, adhering to occupational safety regulations is very important to protect workers’ health and ensure safety during the production process. First, workers must be fully trained on the non-stick coating application process, including spraying, rolling, and dipping methods. The use of personal protective equipment such as gloves, safety glasses, and respiratory masks is mandatory to avoid direct contact with harmful chemicals.

The equipment and machinery used for applying the non-stick coating must be regularly inspected and maintained to ensure they operate correctly and do not pose a danger. Regulations also require companies to maintain a clean work environment, including managing and handling chemicals safely, while keeping the floor always dry to prevent the risk of slipping and falling.

In addition, the company needs to have specific procedures for handling emergency incidents related to chemicals and equipment. Conducting regular safety inspections and risk assessment meetings helps workers become aware of potential risks and how to prevent them. All these regulations are aimed at ensuring the non-stick coating application process is carried out safely and effectively, protecting workers’ health and improving the quality of the final product.

Take tests at occupational safety centers to obtain an occupational safety certificate. This will ensure that workers have the necessary safety knowledge and a valid certification for their work.

6. Handling emergency occupational accident situations when Applying the non-stick coating

When an occupational accident occurs during the process of applying the non-stick coating, timely and effective handling is very important to minimize damage and protect workers’ health. If a worker comes into contact with the non-stick chemical, causing burns or irritation, the affected area must be immediately washed with clean water, and products that could worsen the condition should be avoided. In case of serious chemical exposure, the worker should be taken to a medical facility for immediate treatment.

If an accident occurs due to equipment failure, such as a leaking or malfunctioning sprayer, the equipment’s operation must be stopped immediately, and the incident reported to the maintenance department. Workers should not continue to use the equipment until it has been inspected and repaired. At the same time, the affected area should be cleaned to remove any chemicals or debris that could be hazardous.

In emergency situations, the management team should perform basic first aid procedures, while calling for emergency services if the situation cannot be controlled. After the incident is handled, an investigation into the cause and a review of work procedures are necessary to identify preventive and improvement measures to prevent similar incidents in the future.

IV. Occupational safety and health for staff in Heat treatment of the non-stick coating

1. Characteristics of Heat treatment of the non-stick coating work

In the heat treatment stage of the non-stick coating, the pan, after the non-stick coating has been applied, is placed in a furnace to undergo the process of drying and hardening the coating. This process is very important as it not only helps the non-stick coating to adhere firmly to the pan’s surface but also enhances its heat resistance. When the pan is placed in the furnace, the temperature is strictly and uniformly controlled, preventing the non-stick coating from deforming or detaching.

The curing temperature typically ranges from 180°C to 300°C, depending on the type of non-stick coating used and the technical requirements. The curing time also needs to be controlled to ensure the non-stick coating achieves optimal durability. The curing process not only dries the non-stick coating but also makes it harder and more durable, helping the pan maintain high performance and long-lasting non-stick properties throughout its use.

2. Types of occupational accidents during the Heat treatment of the non-stick coating process

During the heat treatment of the non-stick coating using a furnace, several types of occupational accidents can occur if safety procedures are not followed correctly. One of the common risks is thermal burns from direct contact with the furnace surface or hot parts of the equipment. Burns can occur when an employee accidentally touches the furnace or when hot materials are moved carelessly.

In addition, due to the high temperature in the furnace, the risk of fire and explosion is also a serious issue if there is a leak or flammable materials are near the furnace. Chemical vapors from the non-stick coating can also be harmful to health if there is no proper ventilation system, leading to the risk of poisoning or respiratory irritation. Other accidents may include slips or falls in the area around the furnace, which can be slippery due to leaks or waste materials. To minimize these risks, strict adherence to occupational safety regulations and the use of protective equipment are extremely important.

3. Causes of occupational accidents when Heat treating the non-stick coating

Occupational accidents during the heat treatment of the non-stick coating often stem from several main causes. Firstly, failure to comply with safety regulations when working with furnaces is a common cause. Employees may have accidents due to a lack of protective gear or not knowing how to use safety equipment. Secondly, equipment failure also plays a significant role; furnaces or temperature control systems that do not function correctly can lead to a sudden or uneven increase in temperature, posing a risk of fire, explosion, or burns. Thirdly, lax management in the operation and maintenance of equipment, along with non-compliance with safety procedures, can increase the risk of accidents.

In addition, the lack of an effective ventilation system in the work area can lead to the accumulation of toxic chemical vapors, harming workers’ health. Finally, human factors such as inattention, fatigue, or work pressure can also lead to unwanted accidents. For prevention, it is necessary to focus on employee training, regular equipment maintenance, and maintaining strict occupational safety measures.

4. Measures to prevent occupational accidents when Heat treating the non-stick coating

To prevent occupational accidents during the heat treatment of the non-stick coating, implementing safety measures is very important. First, all employees need to be thoroughly trained on the procedures for working with furnaces, including the use of personal protective equipment such as heat-resistant gloves, safety glasses, and fire-retardant clothing. The furnace system and related equipment must be regularly inspected and maintained to ensure effective and safe operation, avoiding failures that could cause incidents. A good ventilation system must be installed to minimize the risk of exposure to toxic chemical vapors, while maintaining a well-ventilated and clean work environment. During operation, regulations on safe distances and material handling procedures must be strictly followed to prevent accidents from burns or explosions. In particular, the use of temperature warning devices and accurate temperature control is necessary to ensure no incidents occur. Finally, emergency response measures and a clear evacuation plan must be implemented to handle accident situations promptly, to protect the health and safety of all employees.

Complete the occupational safety training to be issued an occupational safety card by the occupational safety training center to complete your work records as required.

5. Occupational safety regulations when Heat treating the non-stick coating

When carrying out the heat treatment process for the non-stick coating, adhering to occupational safety regulations is extremely important to protect the health and safety of workers. First, employees must be fully trained on the procedures for working with furnaces, including safe operating techniques and hazard identification. Personal protective equipment, such as heat-resistant gloves, safety glasses, and fire-retardant clothing, is mandatory to protect the body from the risks of burns or exposure to high temperatures. Furnace equipment must be regularly inspected and maintained to ensure stable operation and no risk of failure. The work area must be equipped with an effective ventilation system to minimize the accumulation of toxic chemical vapors.

At the same time, the heat treatment processes must be carried out according to the manufacturer’s instructions, including adjusting the temperature and curing time accurately to avoid incidents. Finally, an emergency response plan must be established, and employees must be instructed on evacuation steps and handling emergency situations, ensuring comprehensive safety in all situations.

6. Handling emergency occupational accident situations when Heat treating the non-stick coating

When an occupational accident occurs during the heat treatment of the non-stick coating, a quick and accurate response is very important to limit the consequences. First, it is necessary to immediately stop the operation of the furnace and turn off the power to prevent the risk from spreading. If someone is injured, quickly administer first aid on the spot by cooling the burned area with clean water and not allowing the wound to come into contact with any chemicals. At the same time, immediately notify the company’s medical or emergency department and call an ambulance if necessary. In case of an incident such as a fire or explosion, it is necessary to use appropriate fire extinguishing equipment and carry out evacuation steps quickly according to the pre-prepared emergency response plan.

Ensure all employees know the escape routes and safe assembly points. After the emergency situation is handled, a thorough investigation must be conducted to determine the cause and implement corrective measures to prevent recurrence. Ensure that safety procedures are updated and improved based on the investigation results.