Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Manual for Selfie Stick Manufacturing

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, MORE THAN 300 INDUSTRIES)

Discover the occupational safety document for the selfie stick manufacturing industry! This document provides detailed guidance on how to prevent accidents, protect workers, and ensure a safe working environment. Don’t miss out on important tips to improve safety in your factory!

Table of Contents

PART I: CURRENT STATE OF SAFETY IN THE SELFIE STICK MANUFACTURING INDUSTRY

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents in selfie stick manufacturing plants

In the selfie stick manufacturing industry, although it is not a high-risk sector like some other industries, occupational accidents can still occur if safety measures are not taken seriously. Here are some common accidents in selfie stick manufacturing plants:

1. Accidents due to machinery: One of the most serious accidents often occurs when workers work with machinery. These accidents can include being caught in a cutting machine, being crushed, or being injured by the moving parts of the machine. To prevent this, it is necessary to ensure that the machinery is regularly maintained and has safety protection devices.

2. Injuries due to incorrect operation: Workers often suffer injuries when operating tools and equipment incorrectly. For example, using an inappropriate tool or not being properly trained can lead to accidents such as hand cuts, fractures, or dislocations. Training employees on safe operating techniques is very important to minimize this risk.

3. Risks from chemicals: During the production process, some chemicals may be used to treat and preserve the product. Improper contact with chemicals can cause burns, skin irritation, or respiratory problems. To minimize the risk, it is necessary to ensure that workers are fully equipped with personal protective equipment and understand chemical safety.

4. Slips and falls: The factory floor can become slippery due to grease or other liquids, leading to a risk of slipping and falling. These accidents can cause serious injuries such as fractures or head injuries. Maintaining cleanliness and installing non-slip flooring are necessary to prevent this accident.

5. Accidents due to environmental conditions: Suboptimal working conditions such as poor lighting, inadequate ventilation, or high temperatures can lead to accidents or health problems. Ensuring that the working environment meets safety standards is an important factor in protecting the health of workers.

These occupational accidents highlight the importance of implementing safety and protection measures in selfie stick manufacturing plants. By applying safe procedures and proper training, we can minimize risks and protect the health of our workforce.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN WORKING IN A SELFIE STICK MANUFACTURING PLANT

I. Occupational safety and health for Plastic Injection Molding staff

1. Job characteristics of Plastic Injection Molding

The plastic injection molding stage in selfie stick production is the first important step, which determines the shape and quality of the final product. In this process, the plastic raw material is fed into an injection molding machine, where it is melted at a high temperature to become a flexible liquid. Then, the molten plastic is poured into a mold with the available shape of the stick body. This mold is designed with precision to ensure that the stick has a uniform size and shape. After the plastic has been put into the mold, it is cooled and hardened, retaining its defined shape.

The plastic injection molding work not only requires precise technique but also demands strict control of temperature and pressure to ensure product quality. The adjustment of these factors directly affects the durability and functionality of the selfie stick. In addition, this stage also needs to be carried out in a clean environment to avoid impurities that reduce the quality of the plastic. Ensuring that all steps are carried out correctly helps to create selfie stick products that meet the highest standards and the needs of customers.

2. Types of occupational accidents during Plastic Injection Molding

During the plastic injection molding process to produce selfie sticks, some serious occupational accidents can occur if safety measures are not followed. One of the main risks is burns from contact with molten plastic. The plastic is melted at a high temperature, and if not careful, workers can be burned when working near the injection molding machine or when handling hot plastic.

Other accidents can occur due to machinery problems, such as when the injection mold is stuck or a technical problem occurs. This can lead to the machine parts suddenly moving or exploding, posing a risk of injury to workers. Furthermore, improper handling of excess or uncured plastic parts can also lead to unwanted incidents.

To minimize these risks, strict safety measures such as the use of personal protective equipment, ensuring that the machinery is regularly maintained, and training workers on safety procedures are necessary. Regular inspection and maintenance of the machinery system also helps to prevent incidents and protect the health of employees, ensuring a safe and efficient work environment.

3. Causes of occupational accidents during Plastic Injection Molding

Occupational accidents in the plastic injection molding stage mainly arise from causes related to equipment, process, and non-compliance with safety measures. A common cause is equipment problems, such as an unstable injection molding machine or a damaged mold. These malfunctions can cause abnormal operation, leading to the risk of being caught or ejected by hot plastic parts, causing burns or injuries to workers.

In addition, errors in the process of setting the temperature and pressure are also a major cause of accidents. If the temperature of the plastic is not adjusted to the correct level, the plastic may not harden uniformly, leading to incidents such as mold explosion or product damage. Improper handling of molten plastic can also increase the risk of contact with high temperatures, causing burns.

A lack of worker training and non-compliance with safety procedures also contributes to the risk of accidents. Workers who are not fully equipped with knowledge of how to use machinery and handle hot plastic can increase the risk. To minimize these risks, it is necessary to ensure that the equipment is regularly maintained, the operating procedures are carried out correctly, and the workers are fully trained on the necessary safety measures.

4. Measures to prevent occupational accidents during Plastic Injection Molding

To minimize the risk of occupational accidents in the plastic injection molding process, it is essential to apply preventive measures. First, it is very important to ensure that the machinery and equipment are stable and regularly maintained. The injection molding machine and mold need to be regularly inspected to detect technical errors early and prevent incidents that may occur. At the same time, workers need to be thoroughly trained on the operating procedures of the machinery and how to handle molten plastic to raise safety awareness.

Workers should always use personal protective equipment such as heat-resistant gloves and safety glasses when working with hot plastic. This helps to protect them from the risk of burns and other injuries. Furthermore, the work process must strictly follow the safety regulations, including not putting hands or other body parts into the working area with hot plastic when the machine is operating.

Finally, establishing and implementing clear safety procedures, including emergency instructions and incident response plans, helps workers to know how to handle them when an accident occurs. All these measures, working together, will create a safe working environment, protect the health of workers, and ensure production efficiency.

5. Occupational safety regulations for Plastic Injection Molding

When performing the plastic injection molding stage in the production of selfie sticks, compliance with occupational safety regulations is extremely important to ensure the safety of workers and maintain production efficiency. First, workers must be fully trained on the safety procedures before starting work. They need to have a clear understanding of the potential risks and how to use the machinery safely, including familiarizing themselves with personal protective equipment such as heat-resistant gloves, safety glasses, and protective clothing.

The plastic injection molding machinery and equipment must be regularly inspected and maintained to ensure that they are operating stably and without technical errors. This inspection includes ensuring that the mold and the temperature control system are working correctly to avoid incidents that could cause accidents. In addition, the work area must be kept clean and free of obstacles, which helps to minimize the risk of accidents due to slipping or collision.

Workers also need to follow the safe work procedures, not putting their hands or other body parts into the area where the machinery is operating and always using protective equipment when necessary. Establishing clear regulations on incident response and emergency instructions helps to ensure that workers know how to act correctly when an unexpected situation occurs. Compliance with these regulations not only protects the health of workers but also improves the efficiency and quality of the product.

6. Handling emergency occupational accidents during Plastic Injection Molding

When an occupational accident occurs during the plastic injection molding stage, handling the emergency situation quickly and effectively is extremely important to minimize damage and protect the health of workers. First, as soon as an accident is discovered, the worker must immediately stop the operation of the machinery and notify the manager or the rescue department. This helps to prevent the incident from escalating and protects other employees from the risk of further injury.

Next, the injured worker needs to be given first aid immediately. If burned, the injured skin should be washed with cold water to reduce the temperature and minimize the damage. In the case of a serious injury, such as a fracture or severe injury, it is necessary to call an ambulance and take the victim to a medical facility.

The next steps include investigating the cause of the accident to identify the factors that contributed to the incident. This helps to prevent similar accidents in the future. After the incident is handled, it is necessary to make an accident report and adjust the safety measures if necessary. Finally, organizing retraining sessions on occupational safety for all workers will help to raise awareness and prepare better for future emergency situations.

II. Occupational safety and health for Cooling and Cutting staff

1. Job characteristics of Cooling and Cutting

The cooling and cutting stage is an important step in the selfie stick production process, taking place after the plastic has been molded into shape. After the plastic is put into the mold and hardens, the stick needs to be cooled to achieve the necessary hardness and stability. In this stage, the stick is placed in cooling equipment, where the temperature is gradually reduced to ensure that the plastic hardens evenly and does not deform. The cooling process not only helps the product to retain its precise shape but also improves the mechanical properties of the stick.

After the stick has completely cooled, the next step is to cut the stick to the required size. This is usually done by a precision cutting machine, which helps to ensure that each stick achieves the desired length and shape. The cutting process needs to be carried out carefully to avoid damaging the surface or causing unwanted cracks. The accuracy in this stage directly affects the quality of the final product and customer satisfaction.

Therefore, workers need to check the size of each stick after cutting to ensure that all products meet the standards before being packaged and launched on the market.

2. Types of occupational accidents during the Cooling and Cutting process

During the cooling and cutting process of a selfie stick, some occupational accidents can occur if proper safety measures are not taken. A major risk is injury from contact with the cooling equipment or cutting machine. The cooling equipment often has moving parts or cold surfaces, and if not careful, workers can slip or get caught in the equipment.

Accidents can also occur during the stick cutting process. The cutting machine has a sharp blade, and if workers do not follow the safety regulations, they can be cut or injured by flying plastic fragments. The improper use of cutting equipment or a lack of control during the cutting process can lead to serious injuries.

In addition, during the cooling process, if the stick is not placed correctly or the cooling equipment is not working effectively, it can lead to the stick cracking or deforming, which is dangerous to handle. Regular maintenance and inspection of the equipment, along with training workers on safe procedures and the proper use of the equipment, are necessary to minimize these risks.

These measures not only protect the health and safety of workers but also help to maintain the quality of the final product.

3. Causes of occupational accidents during Cooling and Cutting

Occupational accidents in the cooling and cutting stage of selfie sticks often arise from several main causes related to equipment and work processes. A common cause is a problem with the cooling equipment and cutting machine. If these devices are not properly maintained or have technical problems, they can cause risks such as getting stuck, breaking down, or operating unstably. These problems can lead to workers being injured from contact with the moving parts of the machine or flying plastic fragments.

In addition, failure to follow safety procedures is also a major cause. Workers who do not use protective equipment correctly or do not take the necessary safety measures can increase the risk of injury. A lack of worker training on the cooling and cutting process also contributes to an increase in accidents. If workers are not fully instructed on how to use the equipment and the safety regulations, they are prone to making mistakes that can lead to accidents.

Finally, not inspecting and adjusting the cutting equipment can also pose a risk. The accuracy in cutting the stick is very important, and if the cutting machine is not adjusted correctly, it can lead to incidents or damage to the product, which is dangerous for workers. Proper safety measures and equipment maintenance are essential to prevent these risks.

4. Measures to prevent occupational accidents during Cooling and Cutting

To prevent occupational accidents during the cooling and cutting process of selfie sticks, it is very important to apply safety measures. First, regular maintenance and inspection of the cooling equipment and cutting machine are necessary to ensure they are operating stably and without technical errors. The equipment needs to be maintained according to the manufacturer’s instructions to prevent incidents that may occur.

Workers also need to be fully trained on the safety procedures, including the use of personal protective equipment such as heat-resistant gloves, safety glasses, and protective clothing. This training not only helps them to have a clear understanding of how to use the equipment safely but also helps them to identify and handle potential risks during work.

In addition, it is very important to establish and follow safe work procedures. Workers should be reminded not to put their hands or other body parts into the work area when the machine is operating, and must always use protective equipment when necessary. Ensuring that the work area is clean and free of obstacles also helps to minimize the risk of accidents due to slipping or collision.

Finally, emergency response measures and procedures should be implemented and practiced regularly to help workers know how to react quickly and effectively in an emergency. This not only protects the health of workers but also ensures that the production process is smooth and safe.

5. Occupational safety regulations for Cooling and Cutting

Occupational safety regulations in the cooling and cutting stage of selfie sticks play an important role in protecting the health of workers and ensuring that the production process is smooth. First, workers must be fully trained on the work processes and use of the equipment, including mastering the safety measures and how to handle emergency situations. This helps them to identify and avoid potential risks in the cooling and cutting process.

The cooling equipment and cutting machine need to be regularly maintained and inspected to ensure efficient and safe operation. The maintenance process must follow the manufacturer’s instructions and the internal regulations of the factory. Workers need to use personal protective equipment, such as heat-resistant gloves and safety glasses, to protect themselves from risks such as burns or injuries from flying plastic fragments.

The work process must be carried out according to the established safety standards, including not putting hands or other body parts into the work area when the machine is operating. The work area also needs to be kept clean and tidy to avoid accidents due to slipping or collision. Finally, the establishment and implementation of emergency procedures, along with regular practice of emergency situations, helps workers to react quickly and effectively in the event of an incident.

6. Handling emergency occupational accidents during Cooling and Cutting

When an occupational accident occurs during the cooling and cutting of a selfie stick, handling the emergency situation quickly and accurately is extremely important to protect the health of the worker and minimize the damage. As soon as an accident is discovered, the first step is to immediately stop the operating equipment to prevent the situation from becoming more serious. It is necessary to immediately notify the rescue department or the manager to receive timely assistance.

If a worker is slightly injured, such as a burn or cut, first aid should be given immediately at the scene. For burns, the injured skin should be cooled with cold water to reduce pain and limit the damage. In the case of a more serious injury, such as a fracture or severe injury, it is necessary to call an ambulance and take the injured person to a medical facility.

After handling the emergency situation, it is necessary to conduct an investigation to determine the cause of the accident. This helps to adjust the safety measures and improve the work process to prevent similar incidents in the future. Finally, it is very important to organize retraining sessions on occupational safety and update the emergency procedures for all workers to raise awareness and ability to respond to emergencies.

III. Occupational safety and health for Metal Cutting and Bending staff

1. Job characteristics of Metal Cutting and Bending

The metal cutting and bending stage is a crucial step in the selfie stick production process, especially when creating parts such as the stick’s legs and adjustment mechanism. In this stage, the metal bars are processed to achieve the necessary shape and size. First, the metal bars are fed into a cutting machine, where they are cut to precise dimensions. The cutting process must be carried out carefully to ensure that the metal pieces have high precision and are not deformed.

After cutting, the metal bars need to be bent to form the parts of the stick. The bending of the metal usually uses specialized bending machines, which are capable of creating the necessary angles and curves without damaging the material. The bending process requires precise technique to ensure that the formed parts have high durability and are suitable for the design requirements. Both of these stages require meticulous attention to every detail to ensure the quality of the final product.

The results of the cutting and bending process must meet high quality standards, as these parts directly affect the functionality and durability of the stick. The correct implementation of the process and quality inspection after each step is necessary to ensure the perfection and safety of the product.

2. Types of occupational accidents during Metal Cutting and Bending

During the process of cutting and bending metal to form parts such as the stick legs and adjustment mechanism, many occupational accident risks can occur if the safety procedures are not followed. One of the common accidents is injury from contact with the cutting machine blade or the moving parts of the bending machine. The sharp blade can cause serious cuts, while the moving parts of the machine can cause serious injuries if not properly protected.

In addition, workers may be at risk of fractures or muscle strains when handling heavy and hard metal bars. Lifting or moving the metal bars without using support equipment or safety techniques can lead to muscle or spinal injuries.

Other accidents include getting caught in the machinery due to a lack of attention or failure to follow safety regulations, as well as being injured by flying metal debris during the cutting or bending process. These risks can cause serious injuries or serious accidents if there are no appropriate protective measures.

Therefore, it is very important to comply with safety regulations, use personal protective equipment, and train workers on safe work procedures to minimize the risk of occupational accidents in this stage.

3. Causes of occupational accidents during Metal Cutting and Bending

Occupational accidents in the metal cutting and bending stage often stem from several main causes related to both equipment and work processes. A common cause is a problem with the equipment, including cutting machines and bending machines. If these devices are not properly maintained or are damaged, they can cause serious problems such as a broken blade or unstable moving parts, leading to a risk of injury to workers.

In addition, a lack of compliance with safety procedures is also an important factor. Workers who do not use personal protective equipment or do not follow safety regulations can lead to unwanted accidents. For example, direct contact with the blade or moving parts of the machine without protection can cause serious injuries.

Another cause is a lack of technique and training. If workers are not fully trained on how to operate the equipment or do not know how to handle emergency situations, they may make mistakes in the work process. Moving or lifting heavy metal bars without using support equipment or safety techniques can also lead to muscle or spinal injuries.

Finally, not inspecting and adjusting the equipment before use can also lead to dangerous incidents. This requires workers and managers to take regular maintenance and inspection measures to ensure the equipment is always operating safely and effectively.

4. Measures to prevent occupational accidents during Metal Cutting and Bending

To prevent occupational accidents in the process of cutting and bending metal, it is essential to implement safety measures. First, regular maintenance and inspection of cutting and bending equipment is a crucial factor. The machinery needs to be properly serviced to ensure stable operation, thereby reducing the risk of unexpected incidents that could cause injuries.

Workers also need to be thoroughly trained on the operating procedures of the equipment and safety techniques. The use of personal protective equipment such as gloves, safety glasses, and hearing protection helps to minimize risks when in contact with metal debris or loud noise from the machinery.

In addition, it is very important to apply occupational safety regulations during work. Workers must follow safe work procedures, not putting their hands or other body parts into the machine’s operating area while it is running. Heavy metal bars need to be moved by support equipment to avoid muscle or spinal injuries.

Finally, the work area must always be clean and tidy to avoid accidents from slips or collisions. Workers should also be instructed on emergency response procedures to ensure they can handle them quickly and effectively in the event of an incident. The implementation of these measures will contribute to creating a safe working environment and reducing the risk of occupational accidents.

5. Occupational safety regulations for Metal Cutting and Bending

Occupational safety regulations in the process of cutting and bending metal are an essential factor in protecting workers and ensuring a safe working environment. First, all workers must be fully trained on the operating procedures of the equipment and safety measures. They need to have a clear understanding of how to use the cutting machine and bending machine correctly, as well as how to respond to emergency situations.

The metal cutting and bending equipment must be regularly inspected and maintained to ensure that they are working properly and not causing any incidents. Before starting work, workers must inspect the machinery to detect and promptly repair any technical errors.

In addition, the use of personal protective equipment such as cut-resistant gloves, safety glasses, and hearing protection is mandatory to minimize the risk of injury. The work area needs to be clean and tidy to avoid accidents from obstacles or metal debris.

Workers are not allowed to put their hands or other body parts into the operating area of the machinery when the machine is running. Heavy metal bars must be moved by support equipment or according to the correct safety techniques to avoid muscle or spinal injuries.

Compliance with occupational safety regulations not only protects the health of workers but also contributes to production efficiency and reduces the risk of accidents in the factory.

Complete occupational safety training courses at occupational safety training centers to obtain a certificate of occupational safety. From there, workers will have a clear understanding of safety knowledge as well as valid certification for employment.

6. Handling emergency occupational accidents during Metal Cutting and Bending

When an occupational accident occurs during the cutting and bending of metal, handling the emergency situation promptly and effectively is very important to minimize injuries and ensure the safety of everyone. As soon as an accident is discovered, the first step is to immediately stop the operation of the machinery to prevent the risk of further injury. Workers should immediately notify the medical department and management of the incident.

If someone is injured, basic first aid should be given before the medical team arrives. For example, if there is a deep cut, a clean bandage should be used to stop the bleeding and keep the wound clean. In the case of an injury from flying metal, it is very important to keep the injured area from getting infected.

For more serious injuries, such as a fracture or being caught in the machinery, the victim should not be moved without the guidance of medical personnel. Instead, it is necessary to ensure that the victim is kept warm and stable until help arrives.

Finally, after the incident has been handled, it is necessary to make a detailed accident report and investigate the cause to improve the safety process, and prevent similar accidents from occurring in the future. Training workers on emergency situations and updating the response process regularly also plays an important role in enhancing occupational safety.

IV. Occupational safety and health for Surface Treatment staff

1. Job characteristics of Surface Treatment

In the surface treatment stage, the metal parts are taken care of to ensure a smooth and rust-free surface, thereby improving the quality and durability of the product. This process usually includes cleaning, sanding, and applying a protective coating. Initially, the metal parts need to be cleaned to remove dirt, grease, and impurities that could interfere with the subsequent treatment process.

After cleaning, the metal surfaces will be sanded to remove scratches, roughness, and unevenness. This process usually uses sanding equipment or sandpaper to achieve a smooth and uniform surface. Sanding not only improves the aesthetic appeal of the product but also prepares it for the protective coating step.

Finally, a protective coating, such as a paint or plating layer, will be applied to protect the metal surface from corrosion and rust. This process may include painting or galvanizing, depending on the requirements of the product and the usage environment. Surface treatment not only helps to extend the life of the product but also improves the functionality and aesthetic value of the metal parts.

2. Types of occupational accidents during Surface Treatment

During the surface treatment process, workers may encounter many types of occupational accidents if they do not follow the correct safety procedures. One of the common types of accidents is being cut or scratched from contact with sharp metal parts or sanding tools. Abrasive materials, such as sandpaper or metal brushes, can also cause minor cuts or scratches to workers if not used carefully.

In addition, chemical-related accidents are a noteworthy hazard, especially when using cleaning solutions or protective coatings. Chemicals can cause skin burns or irritation if they come into direct contact without protection. During the application of the protective coating, if the spray painting equipment is not well controlled, workers may be sprayed with paint on their eyes or respiratory tract, causing serious health problems.

Accidents from equipment cannot be ignored either. Surface treatment machinery, if not maintained and operated correctly, can cause incidents such as machine jams or collisions, leading to serious injuries for workers. Failure to comply with safety regulations when working with machinery and chemicals can increase the risk of occupational accidents, threatening the health and safety of workers.

3. Causes of occupational accidents during Surface Treatment

Occupational accidents during the surface treatment process often stem from various causes. A common cause is a lack of or failure to use personal protective equipment. When workers do not wear gloves, safety glasses, or dust masks when working with abrasive materials and chemicals, the risk of being cut, scratched, or exposed to hazardous chemicals increases.

In addition, a lack of training and guidance on safe work procedures also contributes to accidents. Workers who are not fully trained on how to use sanding equipment, spray painting machines, or chemicals can easily have incidents due to incorrect operation or a lack of understanding of the associated risks.

Technical problems and equipment are also a major cause. Machinery that is not regularly maintained or shows signs of damage can cause serious accidents. Problems such as machine malfunctions, equipment jams, or chemical leaks can lead to accidents for workers.

Finally, unsafe working conditions, such as a cramped workspace, lack of lighting, or an inadequate ventilation system, can increase the risk of accidents. These factors make the work environment more dangerous and more prone to accidents.

4. Measures to prevent occupational accidents during Surface Treatment

To prevent occupational accidents during the surface treatment process, it is very important to apply safety measures. First, workers need to be fully trained on the work process and how to use the equipment as well as chemicals safely. This helps them to identify and minimize potential risks in the work process.

The full use of personal protective equipment such as gloves, safety glasses, and dust masks is an essential measure to protect workers from cuts, abrasions, and exposure to hazardous chemicals. Ensure that the protective equipment is always inspected and replaced in a timely manner when necessary.

In addition, regular maintenance of machinery and equipment is necessary to ensure they are operating stably and safely. Workers need to be instructed on how to inspect the equipment before use and must report immediately if they detect any signs of damage.

In addition, it is also very important to maintain safe working conditions. Provide a workspace with sufficient lighting, good ventilation, and a reasonable arrangement to minimize the risk of accidents. It is necessary to have preventive measures, such as a ventilation system to limit the accumulation of dust and hazardous chemicals, to help improve the work environment and protect the health of workers.

Finally, the implementation of a safe work process and regular inspections can help to detect and address problems before they lead to occupational accidents.

Complete the occupational safety training course to be issued a Group 3 Occupational Safety Card by the occupational safety training center to complete your work file as required.

5. Occupational safety regulations for Surface Treatment

Occupational safety regulations in the process of surface treatment of metal parts are established to protect the health and safety of workers. First, workers must be fully trained on the surface treatment process and related risks, including the correct use of equipment and chemicals. This includes a clear understanding of the safety instructions and how to handle incidents during work.

When working with surface treatment machinery, workers must always use personal protective equipment such as gloves, safety glasses, and dust masks. This equipment not only helps to protect against cuts and abrasions but also prevents contact with dust and harmful chemical fumes.

The regulations also require that equipment and machinery must be regularly maintained to ensure safe operation. Workers should inspect the equipment before use and report immediately if they detect an incident. Furthermore, providing an effective ventilation system and a clean working condition is necessary to reduce the accumulation of dust and chemical fumes.

Workers also need to follow the rules on hygiene and cleaning the work area to prevent the risk of slipping and coming into contact with chemicals. Finally, the implementation of an emergency response and handling procedure must be clearly instructed and regularly practiced to be ready to respond quickly in the event of an incident.

6. Handling emergency occupational accidents during Surface Treatment

When an occupational accident occurs during the surface treatment of metal parts, handling the emergency situation quickly and effectively is extremely important to minimize the consequences. As soon as an accident is discovered, the first step is to ensure the safety of the surrounding workers. Immediately stop all activities related to the incident, turn off the equipment, and check the area to ensure that there is no risk of further accidents.

Next, the victim needs to receive timely medical care. If it is a minor injury, clean the wound and bandage it on the spot; for more serious injuries or contact with hazardous chemicals, the victim should be taken to the nearest medical facility immediately. In the case of a chemical burn, it is necessary to wash the affected area with clean water and keep the victim from further contact with the chemical.

In addition, it is necessary to notify the management and the authorities so that they can investigate the cause and take corrective measures. Ensure that an incident report is made and all relevant information is recorded to serve the investigation and improvement of the safety process.

Finally, after the incident has been handled, it is necessary to evaluate and update the work process, and organize retraining sessions for workers on preventive measures and handling of emergency situations to prevent similar incidents in the future.

V. Occupational safety and health for Assembly staff

1. Job characteristics of Assembly

The assembly process in the production of selfie sticks includes many important steps to ensure that the products are of high quality and operate effectively. This work begins with assembling components such as the base, buttons, and adjustment mechanism into the stick body. This is a stage that requires high precision so that the parts fit and operate smoothly. These components are usually designed to be compatible with the stick body, and workers must pay attention to every small detail to avoid assembly errors.

Next, the parts of the stick are joined together by using glue or welding methods. The glue is selected depending on the type of material and the technical requirements of the product, ensuring a strong and durable bond. Meanwhile, welding is the method used for metal components, creating a solid connection that can withstand the impact forces during use.

The assembly process requires a high degree of concentration and skill to ensure that all parts are assembled correctly and do not cause errors in the operation of the stick. Ensuring that the parts are securely connected not only helps the product to operate effectively but also protects the user from unwanted incidents.

2. Types of occupational accidents during Assembly

During the assembly of a selfie stick, various types of occupational accidents can occur if safety regulations are not followed. One of the common accidents is being cut or scratched by sharp metal components or the tools used in the assembly process. These injuries often occur when workers come into direct contact with sharp elements without using proper protection.

In addition, accidents from contact with adhesive or welding chemicals are also a major hazard. These chemicals can cause skin irritation, chemical burns, or even poisoning if not handled correctly. Long-term exposure to these chemicals can lead to serious health problems, such as dermatitis or respiratory diseases.

Welding incidents can also cause occupational accidents, including burns from sparks or improper welding techniques, leading to product failure or danger to workers. These accidents often occur when workers do not follow safety measures, such as not wearing safety glasses or not using protective equipment when working with welding machines.

Therefore, it is very important to be aware of and prevent these types of accidents to protect health and ensure safety in the assembly process.

3. Causes of occupational accidents during Assembly

Occupational accidents during the assembly of a selfie stick often stem from various causes. A common cause is a lack of attention and carelessness at work. When workers are not focused on their tasks or do not follow safety procedures, the risk of accidents such as cuts or chemical burns increases. The improper use of personal protective equipment, such as gloves, safety glasses, or a protective coat, also increases the risk of injury from contact with sharp components or hazardous chemicals.

Furthermore, the use of substandard or not regularly maintained equipment and tools is also a major cause. Damaged or poorly maintained tools can lead to incidents during assembly, such as welding incidents causing burns or incorrect assembly. Chemicals used in adhesives or the welding process that are not handled correctly can cause long-term health problems, such as allergies or skin diseases.

In addition, a lack of understanding of the assembly process can also lead to accidents. If workers are not fully trained on how to use the equipment or do not have a clear understanding of the necessary safety measures, the risk of accidents will be higher. Therefore, it is essential to improve training, maintain equipment, and comply with safety regulations to minimize the risk of occupational accidents during the assembly process.

4. Measures to prevent occupational accidents during Assembly

To prevent occupational accidents in the selfie stick assembly process, it is extremely important to implement safety measures. First, workers need to be fully trained on the assembly process, how to use tools and equipment, and safe working techniques. This training not only enhances awareness but also ensures that everyone understands and complies with safety regulations.

The proper use of personal protective equipment is an essential factor. Workers should wear cut-resistant gloves, safety glasses, and a protective coat when working with sharp components or chemicals such as glue. This helps protect the body from cuts or chemical burns.

In addition, regular maintenance and inspection of tools and equipment are necessary to ensure they are in good working order and safe. Damaged or poorly maintained tools can lead to serious accidents.

Finally, it is necessary to follow the correct procedures and techniques when using chemicals and welding equipment. Workers should use protective measures such as a ventilation fan when working with glue or hazardous chemicals and regularly check the welding equipment to ensure that no incidents occur.

In short, the serious implementation of safety measures and ensuring that workers are fully trained and equipped are the keys to minimizing occupational accidents in the assembly process.

5. Occupational safety regulations for Assembly

Occupational safety regulations in the selfie stick assembly process play an important role in protecting the health and ensuring the safety of workers. First, all workers must be trained on the assembly process, how to use tools and equipment, and the necessary safety measures. This includes a clear understanding of the operating steps when assembling components such as the base, buttons, and adjustment mechanism, as well as the technique of joining parts with glue or welding methods.

The instructions for using personal protective equipment are an important part of the safety regulations. Workers must always wear cut-resistant gloves, safety glasses, and a protective coat when working with sharp components or chemicals such as glue. The regulations also require regular inspection and maintenance of tools and equipment to ensure they are in good working order and not dangerous.

Workers need to follow the rules for working with chemicals, including using ventilation equipment when working with glue and ensuring no direct contact with hazardous chemicals. The safety regulations also require maintaining a clean and tidy work environment to minimize the risk of slipping or collision.

Finally, the regulations require immediate reporting of any incidents, accidents, or hazardous situations to the management for timely corrective action. Strict compliance with these regulations helps to create a safe and efficient work environment.

6. Handling emergency occupational accidents during Assembly

When an occupational accident occurs during the assembly of a selfie stick, timely and accurate handling is very important to minimize injuries and ensure the safety of workers. First, upon discovering an accident, it is important to immediately stop all assembly activities and notify the medical staff or the on-site rescue team. Providing detailed information about the victim’s condition and the situation will help the rescue team to quickly take appropriate action.

If the accident is related to chemicals or glue, it is necessary to immediately isolate the affected area and require workers to leave the area. Workers should be instructed to wash the area exposed to the chemical with clean water and report the incident to the medical staff to receive professional care. In the case of an injury from equipment or tools, check the wound, bandage it if necessary, and quickly take the victim to the nearest medical facility for treatment.

At the same time, it is very important to record the details of the accident and the contributing factors to assess the cause and take preventive measures for similar situations in the future. Finally, holding an emergency meeting to review the situation and review the safety procedures is necessary to improve future safety measures and prevent the recurrence of accidents.