Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Manual for Air Filter Manufacturing

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, MORE THAN 300 INDUSTRIES)

Discover the Air Filter Production Occupational Safety Document to master effective protective measures in the production process. This article provides detailed guidance, helping to ensure worker safety and improve product quality. Don’t miss the opportunity to improve your work environment!

Table of Contents

PART I: CURRENT STATE OF SAFETY IN THE AIR FILTER PRODUCTION INDUSTRY

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents in air filter manufacturing plants

In the air filter manufacturing industry, occupational accidents can occur at any time if safety rules are not followed. Here are some typical accidents:

Accidents due to contact with machinery: Workers can be injured from direct contact with operating machinery, such as cutting or pressing machines, if they do not wear protective equipment or do not pay attention to safety procedures.
Risks from dust and chemicals: The air filter production process often generates dust and uses chemicals. Inhaling dust or coming into contact with hazardous chemicals can cause serious health problems, from respiratory inflammation to poisoning.
Incidents due to equipment failure: Incidents such as leaks or equipment failure can lead to serious accidents, for example, fire, explosion, or electric shock, if not regularly inspected and maintained.
Accidents due to an unsafe work environment: A cluttered work environment, lack of lighting, or unfavorable conditions can lead to slips, falls, impacts, or other injuries.

Awareness and prevention of these risks are very important to protect the health and safety of workers in the air filter manufacturing industry.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN WORKING IN AN AIR FILTER MANUFACTURING PLANT

I. Occupational safety and health for Filter Layer Processing staff

1. Job characteristics of Filter Layer Processing

The filter layer processing stage is a crucial step in air filter production, where raw materials are fed into machinery to form the filter layer according to the product’s technical requirements. This process begins with feeding the prepared raw materials into the processing equipment, where they will undergo steps such as rolling, pressing, or weaving. The raw materials can include filter paper, non-woven fabric, or fiberglass, and each type of material requires a different processing method to achieve the desired properties, such as filtration capacity and durability.

During the rolling process, the raw material is rolled into thin and uniform layers, creating the foundation for the filter layer. If the pressing method is used, the raw material is compressed under high pressure to form layers with a specific thickness and density. For the weaving method, the raw material fibers are woven together to create a filter layer with a special structure. Each processing method is aimed at optimizing filtration performance and ensuring the final product meets quality standards. The filter layer processing process not only requires precision and sophistication but also needs strict control of factors such as temperature and pressure to achieve a high-quality finished product.

2. Types of occupational accidents during Filter Layer Processing

During the processing of the filter layer, occupational accidents can occur due to various factors, which are dangerous for workers and reduce production efficiency. One of the common accidents is contact with mechanical machinery, such as a rolling machine or a pressing machine. Workers can get their hands, feet, or clothes caught in the moving parts of the machinery if they do not follow safety measures or do not use full protective equipment.

In addition, the pressing and rolling process can generate high temperatures, increasing the risk of burns or contact with hot surfaces. When the raw material is processed under high pressure, there can be incidents of leakage or rupture, leading to the dispersal of sharp debris or hot material, causing injury to workers.

While weaving the material layers, workers may encounter problems with the fibers getting caught in the machine or parts of the equipment, leading to a risk of cuts or skin abrasions. These accidents often occur when workers are not fully trained on safety procedures or when the machinery is not regularly maintained. Identifying and preventing these risks is very important to ensure the safety and protect the health of workers during the filter layer processing.

3. Causes of occupational accidents during Filter Layer Processing

Occupational accidents during the filter layer processing often occur due to a combination of many causes, related to both machinery and human factors. A major cause is a lack of compliance with safety procedures. When workers do not comply with personal protective equipment regulations or do not use protective equipment correctly, the risk of injury from contact with mechanical machinery such as rolling machines or pressing machines increases significantly.

Equipment and machinery are also the source of many incidents. Machinery that is not regularly maintained can lead to incidents such as leaks, cracks, or malfunctions, increasing the risk of accidents. When the machinery is not working properly, there can be situations where the machine stops suddenly or the moving parts are unstable, posing a risk of getting caught or being hit.

In addition, unsafe working conditions also contribute to accidents. For example, a cluttered work environment, lack of lighting, or poor ventilation can increase the risk of slips, trips, falls, impacts, or exposure to dust and hazardous chemicals. Poor coordination between workers during the operation of machinery and handling of raw materials can also lead to serious incidents. To reduce risks, it is necessary to train workers on occupational safety and maintain machinery in good condition.

4. Measures to prevent occupational accidents during Filter Layer Processing

To prevent occupational accidents during the filter layer processing, it is very important to implement preventive measures. First, it is necessary to comply with safety procedures and use personal protective equipment such as gloves, safety glasses, and heat-resistant clothing. Workers need to be fully trained on how to operate the machinery correctly and how to handle raw materials safely.

Regular maintenance and inspection of machinery is another important factor in ensuring that the equipment is operating stably and safely. Machinery such as rolling machines and pressing machines needs to be regularly inspected to detect and promptly repair any damage or technical problems. This helps to reduce the risk of accidents due to machinery failure.

In addition, improving working conditions is also an important part of preventing accidents. Ensuring that the work area is always clean, tidy, and well-lit helps to reduce the risk of slips, trips, falls, and impacts. Providing an effective ventilation system to reduce dust and toxic gases also helps to protect the health of workers.

Finally, it is necessary to establish and maintain an effective communication process between workers. Close coordination and clear information about the production steps and potential risks help to ensure that everyone is aware of the risks and knows how to respond in a timely manner. These measures combined help to create a safe working environment and reduce the risk of occupational accidents.

5. Occupational safety regulations for Filter Layer Processing

When processing the filter layer in a factory, compliance with occupational safety regulations is very important to protect the health and safety of workers. The first regulation is to require workers to be fully trained on the operating procedures of the machinery, safety measures, and how to handle raw materials. This ensures that workers not only have a clear understanding of the production steps but are also aware of potential risks and how to prevent them.

Machinery such as rolling machines, pressing machines, and weaving equipment must be equipped with protective devices and regularly inspected to ensure they are operating safely. There must be emergency stop systems and clear safety warnings to protect workers from accidents due to machinery failure.

At the same time, workers must always use full personal protective equipment such as gloves, safety glasses, and heat-resistant clothing. In addition, the work area must be kept clean, well-ventilated, and equipped with an effective ventilation system to minimize the risk of contact with dust or toxic gases.

Finally, there must be strict regulations on regular maintenance of machinery and safety inspections. Workers should be encouraged to immediately report any incidents or problems with the equipment for timely handling and to avoid accidents. These regulations help to create a safe working environment and reduce the risk of occupational accidents in the filter layer processing.

6. Handling emergency occupational accidents during Filter Layer Processing

When an occupational accident occurs during the filter layer processing, handling the emergency situation quickly and effectively is very important to minimize damage and protect the health of workers. As soon as an accident occurs, the first step is to cut off the power to the malfunctioning equipment to prevent further risks. Then, it is necessary to immediately alert the in-house rescue and medical teams so they can arrive at the scene and handle the situation in a timely manner.

If a worker is injured, first aid should be given on the spot, and if necessary, basic first aid measures such as stopping bleeding or cleaning the wound should be provided. At the same time, it is necessary to immediately notify the local medical authorities to transfer the victim to the nearest hospital or medical facility if necessary.

For machinery incidents, after handling the emergency issues, it is necessary to inspect and investigate the root cause of the incident to prevent similar accidents in the future. The accident reports need to be completed fully and promptly for analysis and improvement of the safety process. Finally, organizing regular training and drills on emergency response for all workers helps them to be better prepared when facing an emergency situation, thereby enhancing safety at work.

II. Occupational safety and health for staff creating the filter layer structure

1. Job characteristics of Creating the filter layer structure

Creating the filter layer structure is a crucial stage in air filter production, where the filter layer is composed of multiple layers of materials with different properties to meet the product’s technical requirements. Depending on the intended use of the air filter, the filter layer can be designed with properties such as air permeability, dust holding capacity, and mechanical strength.

The process of creating the filter layer structure begins with selecting suitable materials, such as fiberglass, filter paper, or non-woven fabric. Each type of material has its own characteristics, such as high temperature resistance, air permeability, or dust holding capacity, and will be selected based on the specific requirements of the air filter. After selecting the materials, they are arranged and combined using technical methods such as rolling, pressing, or weaving to create layers with the appropriate thickness and density.

This process not only requires precision in design and production but also demands strict quality control to ensure that the filter layers meet performance and durability standards. The effective creation of the filter layer structure not only ensures optimal filtration capacity but also contributes to the longevity and overall performance of the air filter product.

2. Types of occupational accidents during the process of Creating the filter layer structure

During the process of creating the filter layer structure, some types of occupational accidents can occur due to various factors related to the equipment and work environment. When the raw materials are processed and combined to form the filter layer, workers may face the risk of injury from mechanical machinery, such as rolling machines or pressing machines. Direct contact with the moving parts of the machinery can lead to hands, feet, or clothing getting caught in these parts, causing serious injuries.

In addition, when the material layers are cut or woven, workers may encounter incidents related to the blade or cutting equipment, causing cuts or skin abrasions. The process of handling the materials can generate dust or small debris, increasing the risk of irritation or respiratory problems if appropriate protective equipment is not used.

Incidents related to temperature are also a hazard in the process of creating the filter layer structure. The machinery or equipment may generate heat, causing burns if the worker comes into direct contact without proper protection. A work environment with insufficient lighting or poor ventilation can also increase the risk of accidents, so it is necessary to maintain safe and clean working conditions. Identifying and preventing these risks is very important to protect the health and safety of workers in the production process.

3. Causes of occupational accidents when Creating the filter layer structure

Occupational accidents during the process of creating the filter layer structure often stem from many causes, related to both human and equipment factors. One of the main causes is a lack of compliance with safety regulations. Workers may not use full personal protective equipment or not follow safety steps when operating machinery, leading to a risk of injury.

Machinery and equipment also play an important role in causing accidents. If equipment such as rolling machines or pressing machines are not regularly maintained or have faulty parts, they can cause incidents during operation. These technical errors can lead to dangerous situations such as hands, feet getting caught, or equipment failure, causing accidents for workers.

Unsafe working conditions also contribute to accidents. A cluttered work environment, lack of lighting, or no good ventilation system can increase the risk of accidents, such as slips, trips, falls, or contact with dust and toxic gases. Furthermore, a lack of training or inadequate guidance on the work process and use of equipment can also lead to serious errors and increase the risk of accidents. Therefore, it is very important to ensure adequate training, equipment maintenance, and safe working conditions to minimize the risk of occupational accidents.

4. Measures to prevent occupational accidents when Creating the filter layer structure

To prevent occupational accidents during the process of creating the filter layer structure, it is very important to implement preventive measures. First, workers need to be fully trained on the work process and safety measures. This training includes instructions on how to operate machinery correctly, use personal protective equipment such as gloves, safety glasses, and heat-resistant clothing, and how to identify potential risks.

Regular maintenance and inspection of the equipment is another important factor in preventing accidents. Machinery such as rolling machines and pressing machines needs to be regularly inspected to detect and promptly repair technical errors or incidents. The machinery’s protective equipment, such as an emergency stop system and shielding devices, must also always be in good working order.

Improving working conditions is another measure to enhance safety. Ensuring that the work area is always clean, tidy, and well-lit helps to minimize the risk of slips, trips, falls, and impacts. An effective ventilation system needs to be maintained to reduce dust and toxic gases, protecting the health of workers.

Finally, holding regular safety drills and encouraging workers to report hazardous situations helps to create a safer working environment. By combining these measures, we can reduce risks and protect workers from occupational accidents in the process of creating the filter layer structure.

5. Occupational safety regulations when Creating the filter layer structure

When creating the filter layer structure in air filter production, compliance with occupational safety regulations is very important to protect the health and safety of workers. The first regulation is to require all workers to be fully trained on the production process and the potential risks related to the job. This includes understanding how to operate machinery, use personal protective equipment, and handle raw materials safely.

Equipment and machinery such as rolling machines, pressing machines, and weaving machines must be fully equipped with protective devices, such as protective shields and emergency stop systems. This equipment needs to be regularly inspected and maintained to ensure stable and safe operation.

In addition, workers must comply with the use of personal protective equipment such as gloves, safety glasses, and masks when working with materials that can generate dust or toxic gases. The regulations also require maintaining clean and well-ventilated working conditions to minimize the risk of slips, trips, falls, or contact with hazardous substances.

The safety procedures need to be clearly established and must be strictly followed, including performing a safety check before starting a work shift and immediately reporting any incidents or hazardous situations. By implementing these regulations, we not only protect the health of workers but also improve production efficiency and reduce the risks related to the job.

6. Handling emergency occupational accidents when Creating the filter layer structure

When an occupational accident occurs during the process of creating the filter layer structure, a quick and effective response is very important to minimize damage and protect the health of workers. The first step is to immediately cut off the power to the malfunctioning equipment to prevent the risk of further accidents or injuries.

Immediately after, it is necessary to immediately notify the in-house rescue and medical teams, ensuring that they are fully equipped to handle the situation. While waiting for assistance, if a worker is injured, it is necessary to perform basic first aid measures. For example, if there is an open wound, it is necessary to stop the bleeding and clean the wound to prevent infection.

For situations related to machinery, it is necessary to ensure that the area around the malfunctioning equipment is isolated to avoid further contact from other workers. Technical experts should inspect the equipment to determine the cause of the incident and take necessary repairs before bringing the machinery back into operation.

Finally, a detailed report on the accident must be completed and sent to the relevant authorities for investigation and analysis of the cause. Based on the investigation results, it is necessary to update and improve the safety procedures and train workers to prevent similar accidents in the future. Prompt and accurate action not only helps to minimize damage but also strengthens safety measures in the production process.

III. Occupational safety and health for Filter Frame Assembly staff

1. Job characteristics of Filter Frame Assembly

During the bonding and pressing of the filter layer, various occupational accidents can occur due to the interaction between workers and equipment, as well as the materials used. One of the common accidents is burns from contact with heat-sealing tools or hot glue. When using heat-sealing equipment, workers are at risk of being burned if they do not follow safety procedures or do not use appropriate protective equipment.

Other accidents may include injuries from mechanical bonding equipment. For example, when using staples, nails, or screws to attach the filter layer to the frame, workers can be stabbed or cut if they are not careful during operation. This can happen due to carelessness in using tools or equipment that is not properly maintained.

In addition, handling heavy or bulky materials can lead to muscle and joint injuries if workers do not use proper lifting and moving techniques. These accidents often occur when there is no support from lifting equipment or when there is no good coordination between team members.

These accidents not only cause health damage to workers but can also disrupt the production process. Therefore, it is very important to implement preventive measures and ensure safety during the bonding and pressing process to protect health and enhance work efficiency.

2. Types of occupational accidents during Filter Frame Assembly

3. Causes of occupational accidents during Filter Frame Assembly

Occupational accidents during the bonding and pressing of the filter layer often stem from several main causes related to equipment, materials, and work techniques. A common cause is a lack of use or maintenance of the equipment. For example, if the heat-sealing equipment is not properly maintained, there may be a problem with high temperature, which can burn workers. Similarly, mechanical bonding equipment such as drills and screws can cause accidents if they are not regularly inspected and maintained.

Incorrect work techniques are also a major cause of accidents. Workers may be injured from improper operation or failure to follow safety procedures. For example, not using personal protective equipment when working with hot glue or not following safety instructions when using machinery can lead to burns or injuries.

In addition, problems related to materials, such as the use of substandard glue or uneven material layers, can also increase the risk of accidents. Errors in the material can lead to problems when performing the bonding process, which is dangerous for workers.

Finally, environmental factors at work such as poor lighting conditions, a cramped workspace, and a lack of safety equipment can increase the risk of accidents. These factors directly affect the ability of workers to observe and operate, increasing the likelihood of accidents in the process of bonding and pressing the filter layer.

4. Measures to prevent occupational accidents during Filter Frame Assembly

To minimize occupational accidents during the bonding and pressing of the filter layer, it is very important to implement preventive measures correctly. First, workers need to be thoroughly trained on safe work procedures and how to use the equipment. Regular training helps to raise awareness of the risks and skills to handle emergency situations.

Regular maintenance and inspection of the equipment is another important factor. The heat-sealing equipment, mechanical bonding machinery, and related tools need to be regularly inspected and maintained to ensure stable and safe operation. At the same time, the use of personal protective equipment such as heat-resistant gloves, safety glasses, and a mask is necessary to protect workers from the risk of burns or other injuries.

In addition, the work environment also needs to be organized reasonably to ensure safety. Provide sufficient lighting, and maintain a clean and tidy workspace to minimize the risk of accidents due to tripping or collision. Materials and chemicals such as glue also need to be stored and used correctly, according to the manufacturer’s instructions.

Finally, it is very important to plan and implement incident response measures. Workers should be instructed on how to react quickly and effectively when an accident occurs, and regular drills on first aid and rescue should be organized. These measures not only protect the health of workers but also help maintain efficiency and safety in the production process.

5. Occupational safety regulations for Filter Frame Assembly

Occupational safety regulations during the bonding and pressing of the filter layer are very important to ensure the safety of workers and prevent accidents. First, all workers involved in this stage must be fully equipped with personal protective equipment such as heat-resistant gloves, respiratory protection masks, and safety glasses to avoid direct contact with adhesives, high temperatures, and harmful agents from machinery.

In addition, regular inspection and maintenance of equipment and machinery such as heat-sealing machines or presses is necessary to ensure they are operating safely and efficiently. Workers must strictly follow the operating procedures of the machinery, avoiding close contact with moving parts without appropriate protection. Only those who have been fully trained and have a clear understanding of the machinery are allowed to operate this equipment.

In particular, the factory needs to have strict supervision and management measures, and regularly inspect the work environment to detect and eliminate potential hazards. All safety regulations must be clearly communicated, easy to understand, and strictly applied to ensure maximum safety for everyone involved in the production process.

Complete occupational safety training courses at occupational safety training centers to obtain a certificate of occupational safety. From there, workers will have a clear understanding of safety knowledge as well as valid certification for employment.

6. Handling emergency occupational accidents during Filter Frame Assembly

During the process of bonding and pressing the filter layer, if an emergency occupational accident occurs, timely and correct handling is a crucial factor in minimizing the damage. First, workers need to remain calm, and immediately stop all operations of the machinery and related equipment to avoid making the situation worse. Then, quickly assess the severity of the accident, and immediately notify the supervisor or the person in charge of occupational safety to receive support.

If the accident is related to a burn from a heat-sealing machine or glue, the worker should be given first aid by cooling the wound under clean water and covering it with a sterile bandage. In the case of a more serious accident, such as a hand getting caught in the machinery, one should not try to free the victim on their own but should wait for a professional rescue team.

It is important that the factory has on-site first aid equipment and necessary support tools to respond quickly in such emergency situations. Regular training sessions on first aid and rescue for all employees are necessary to ensure that everyone understands the procedure and can coordinate effectively when needed. A quick and correct response not only helps to protect the lives of workers but also limits the serious consequences of occupational accidents.

IV. Occupational safety and health for Bonding and Pressing staff

1. Job characteristics of Bonding and Pressing

The assembly of the filter frame is a crucial step in air filter production, ensuring that the filter layers are securely fixed to the frame to optimize work efficiency. The filter frame is usually made of materials such as plastic, metal, or composite, depending on the technical requirements and the usage environment of the product. The precision in assembly is a key factor to ensure that the frame and the filter layer fit perfectly, avoiding gaps or unwanted movement during use.

During this process, the worker needs to pay attention to aligning the position of the filter layer and the frame so that they fit, without causing deformation or damage to the filter layers. For different frame materials, workers must apply appropriate assembly techniques, such as using specialized glue or a mechanical bonding mechanism. This helps to ensure that the filter layer will not be loose or come off when subjected to air pressure or impacts from the external environment.

The assembly of the filter frame requires meticulousness and precision, while also complying with strict technical regulations to ensure that the final product meets high quality standards and is safe for the user.

2. Types of occupational accidents during Bonding and Pressing

During the process of assembling the filter frame, workers may face many risks of occupational accidents due to the nature of the work, which involves handling hard and heavy materials such as metal, hard plastic, or machinery and equipment to support the assembly. One of the common accidents is being cut or having a hand caught when operating with a metal frame or sharp tools. In addition, working in a machinery environment can pose a risk of a hand being caught in the mechanical equipment when assembling the filter frame.

Accidents from impacts or injuries can also occur when workers move, lift, or assemble large filter frames, especially when performing work in a confined space or with a lack of lighting. In addition, long-term exposure to materials such as plastic or metal can also cause skin or respiratory problems if workers do not use full protective equipment.

In addition, due to the process requiring precision and meticulousness, a lack of concentration or incorrect operation can cause technical problems, leading to unwanted accidents. These incidents not only cause injury to workers but can also affect the quality of the product and the work efficiency of the entire production line.

3. Causes of occupational accidents during Bonding and Pressing

Occupational accidents during the assembly of the filter frame often stem from various causes. One of the common causes is that workers do not follow the correct safety procedures when using tools and equipment. The improper use of machinery or not carefully checking before operation can lead to serious accidents, such as a hand getting caught in the machine, or an incident with moving parts.

In addition, an unsafe work environment is also a major cause. A slippery work floor, a cramped workspace, or a lack of lighting can all contribute to creating out-of-control situations when workers move or operate with the filter frame. In particular, handling heavy or bulky materials such as metal or plastic frames without using full protective equipment such as gloves and safety shoes also creates conditions for injuries to occur.

A lack of concentration or fatigue at work, especially when performing repetitive operations in the production process, also increases the risk of errors and leads to occupational accidents. In addition, a lack of adequate occupational safety training and a lack of knowledge of potential risks in the assembly process are also basic causes of accidents.

4. Measures to prevent occupational accidents during Bonding and Pressing

To prevent occupational accidents during the assembly of the filter frame, it is paramount to strictly adhere to safety regulations. First, workers need to be fully trained on safe work procedures, how to use equipment, and understand the potential risks. Providing full protective equipment such as gloves, non-slip shoes, and safety glasses will help to minimize the risk of injury when handling heavy or sharp materials.

In addition, it is necessary to ensure that the machinery and tools are regularly inspected and maintained to avoid technical problems during use. The work environment needs to be kept clean, the workspace well-ventilated and well-lit, which helps workers to easily perform operations accurately, avoiding slippery or tripping situations.

A high level of concentration throughout the work process is also an effective accident prevention measure. Workers should avoid working overtime and ensure they have adequate rest time to maintain productivity and alertness. By applying these measures, the risk of occupational accidents will be significantly reduced during the assembly of the filter frame.

Complete the occupational safety training course to be issued a Group 3 Occupational Safety Card by the occupational safety training center to complete your work file as required.

5. Occupational safety regulations for Bonding and Pressing

During the assembly of the filter frame, compliance with occupational safety regulations is a key factor in protecting the health and lives of workers. First, workers must be fully equipped with appropriate personal protective equipment such as cut-resistant gloves, safety glasses, and non-slip shoes to minimize the risk of accidents when handling sharp or hard-edged materials.

In addition, workers need to be thoroughly trained on the use of machinery and support tools in the assembly process. Regular inspection and maintenance of the machinery ensures that the equipment is operating stably and does not cause incidents during production. The machinery such as heat-sealing machines or presses also needs to be operated by experienced and professionally trained people.

The work area must be arranged neatly, with a well-ventilated space to avoid tripping or impact situations. At the same time, the regulations on machine maintenance and safety checks before starting work also need to be strictly implemented. The full compliance with these regulations not only helps to reduce the risk of occupational accidents but also improves the work efficiency in the filter frame assembly process.

6. Handling emergency occupational accidents during Bonding and Pressing

During the assembly of the filter frame, if an occupational accident occurs, emergency handling requires a quick and accurate procedure. First, when an accident is discovered, the nearby worker needs to immediately stop the operation of the machinery and report the situation to the occupational safety department or the person in charge. If a worker has a serious injury such as a cut or a strong impact, first aid on the spot is necessary, including bandaging the wound or temporarily immobilizing the injured body parts.

In a serious accident involving equipment such as a press or heat-sealing machine, the victim needs to be taken out of the danger zone immediately and the medical team contacted for an emergency. It is important not to move the victim if there are signs of a spinal injury or serious injury, but to wait for the ambulance team to provide assistance.

In addition, it is necessary to record the details of the incident to serve the investigation and remedy the consequences. This helps to improve the occupational safety process and prevent similar accidents in the future.