Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Document for Operating Bucket Truck Lift Cranes

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, OVER 300 PROFESSIONS)

The occupational safety document for operating a bucket truck lift crane is a detailed and in-depth guide on safety measures and procedures. Discover important instructions to ensure safety and efficiency in the operation of bucket trucks. Make sure you clearly understand the potential hazards and preventive measures to protect employees and property.

Table of Contents

PART I: CURRENT STATE OF SAFETY WORK FOR JOBS RELATED TO BUCKET TRUCK LIFT CRANES

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some Occupational Accidents When Operating a Bucket Truck Lift Crane

Operating a bucket truck lift crane is a crucial part of jobs related to construction, infrastructure maintenance, and other activities requiring access to heights. However, the use of bucket trucks also carries several risks of serious accidents for the operator and other workers in the work area. Below are some common occupational accidents when operating a bucket truck:

Falls from height: One of the main risks when operating a bucket truck is falling from a height. Employees can fall out of the bucket if they do not wear safety harnesses correctly or if the equipment has a technical fault. These accidents often cause serious injury or death.
Collisions and impacts: During the movement of the bucket truck, there is a risk of collision or impact with other structures or construction materials. This can cause damage to the equipment or injury to people nearby.
Getting stuck in the bucket: A situation can occur where an employee gets stuck in the bucket due to a technical fault or equipment failure. In this case, rescue can be complicated and requires a rapid response from the fire department or emergency medical team.
Electrical incidents: Bucket trucks are often powered by electricity to operate the lifting mechanism and other auxiliary equipment. Electrical incidents can occur if there is a technical fault or if the bucket truck comes into contact with power lines. This can pose a risk of electric shock or explosion.
Lifting mechanism failure: Some accidents can occur due to technical failure of the lifting mechanism, leading to the bucket falling suddenly or becoming uncontrollable. This can cause injury to the operator or people nearby.

To minimize the risk of accidents when operating a bucket truck, proper training, regular maintenance, and adherence to safety rules are crucial. Operators must have a clear understanding of the potential risks and safety measures to protect themselves and those working around them.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN OPERATING A BUCKET TRUCK LIFT CRANE

I. Introduction

A. Overview of the Importance of Occupational Safety When Operating a Bucket Truck Lift Crane

Occupational safety when operating a bucket truck is an extremely important factor in construction and infrastructure maintenance work environments. Adhering to safety rules and measures not only protects the health and lives of employees but also minimizes the risk of accidents and equipment damage, thereby increasing work efficiency and reducing costs related to repairs and compensation.

A safe working environment allows employees to work confidently and focused, thus improving the quality of work and minimizing employee errors. At the same time, ensuring occupational safety also enhances the company’s reputation in the community and with customers and partners.

Safety policies and training programs are the essential foundation for building a safe work culture within the organization. This includes providing necessary knowledge and skills to employees, promoting awareness of risks and preventive measures, as well as establishing procedures for inspection and incident reporting to learn and continuously improve.

In summary, prioritizing occupational safety when operating a bucket truck is not only a legal obligation but also a fundamental necessity to protect employees and company assets, as well as to create an efficient and sustainable working environment.

B. Important Safety Protocols and Regulations When Operating a Bucket Truck Lift Crane

Periodic Inspections: Before each use, the bucket truck must be periodically inspected to ensure that all mechanical and electronic components are functioning correctly. This includes checking the lifting mechanism, electrical system, and other safety protection devices.
Training and Certification: All personnel involved in operating the bucket truck must be fully trained on how to use the equipment, the risks involved, and safety measures. They also need to have the appropriate certification to prove their ability and knowledge.
Use of Personal Protective Equipment: Employees must be fully equipped with and use personal protective equipment such as helmets, safety glasses, safety harnesses, and insulated gloves to protect against accident risks.
Compliance with Safety Rules for Working at Heights: When working at heights, employees must comply with safety rules such as not standing on unstable edges, not exceeding the specified load capacity of the bucket, and following safety measures when climbing into and out of the bucket.
Work Environment Check: Before starting work, the work environment must be checked to ensure there are no hazards from power lines, falling materials from above, or adverse weather conditions that could cause danger.

II. Components and Functions of a Bucket Truck Lift Crane

A. The Different Components of a Bucket Truck Lift Crane

Bucket: This is the part that holds the employee or materials being lifted to a height by the lifting mechanism. The bucket typically varies in size and weight depending on the specific use.
Lift Mechanism: This is the mechanical or electronic system used to raise and lower the bucket. This mechanism often includes motors, hydraulic pumps, and other mechanical parts to create lifting force and control movement.
Boom: This is the long, rigid part of the bucket truck, used to lift and move the bucket to the desired position. The boom can often be adjusted to suit specific job requirements.
Control System: This is the part that allows the operator to control the functions of the bucket truck such as lifting, rotating, and moving. The control system usually includes controllers and switches installed in the bucket or on the steering wheel.
Safety System: These are the devices and measures integrated to ensure the safety of employees and the work environment. The safety system includes sensors, emergency stop systems, and personal protective measures such as safety harnesses and protective covers.

B. Structure and Operating Principle of a Bucket Truck Lift Crane

A bucket truck, also known as an aerial lift, is a piece of equipment used to lift and transport personnel and materials at height. The structure of a bucket truck includes a bucket, a boom, and a lifting mechanism system.

The bucket is the part that contains personnel or materials to be lifted. It usually comes in different sizes and weights depending on the specific purpose of use. The bucket is typically mounted on a lifting mechanism, allowing it to move up and down with the boom.

The boom is the long and rigid part of the bucket truck, used to raise and move the bucket to the desired position. The boom is usually made from materials like steel and can be adjusted to fit specific job requirements.

The lifting mechanism system is a crucial part of the bucket truck, allowing the bucket to move up and down. This mechanism often includes motors, hydraulic pumps, and other mechanical parts to generate lifting force and control movement.

The operating principle of a bucket truck is based on using the lifting force generated by the lifting mechanism to raise and lower the bucket. As the boom moves, the bucket also moves with it to ensure safe and efficient transportation.

C. Applications in the Maintenance and Repair Industry for Bucket Truck Lift Cranes

The bucket truck is an important tool in the maintenance and repair industry, especially when working at heights and in hard-to-reach places. The bucket truck provides a mobile and safe platform for personnel to access difficult locations and perform maintenance and repair tasks easily and effectively.

One of the common applications of bucket trucks in the maintenance and repair industry is inspecting and maintaining electrical systems, lighting systems, and high-rise structures. The bucket truck allows personnel to access equipment and areas that are normally very difficult to reach, helping them to inspect and perform maintenance tasks quickly and accurately.

In addition, bucket trucks are also used to install and replace equipment and components at heights. Maintenance personnel can use the bucket truck to transport and install new equipment or replace faulty components without having to use other means of transport such as elevators or scaffolding.

Furthermore, bucket trucks are also often used in performing regular cleaning and maintenance tasks on high-rise structures such as bridges, utility poles, and buildings. Using a bucket truck helps personnel access hard-to-reach areas safely and quickly, thereby reducing the time and effort required to perform these tasks.

D. Risks Associated with Operating a Bucket Truck Lift Crane

Operating a bucket truck presents many potential risks for personnel and the work environment. One of the biggest risks is the danger of accidents from falls from height. Personnel can fall from the bucket if they do not use safety harnesses correctly or if the equipment has a technical fault. These accidents often result in serious injury or death.

Additionally, bucket trucks also have the risk of colliding with and impacting other structures or construction materials during movement. This can cause damage to the equipment or injury to people nearby.

Another risk relates to getting stuck in the bucket, which can happen due to technical faults or equipment failure. In this case, rescue can be complicated and requires a quick response from the fire department or emergency medical services.

Bucket trucks are also often powered by electricity to operate the lifting mechanism and other auxiliary equipment. Electrical incidents can occur if there is a technical fault or if the bucket truck comes into contact with power lines, causing a risk of electric shock or explosion.

III. Safety Inspection and Maintenance Before Operating a Bucket Truck Lift Crane

A. Safety Check Before Operating a Bucket Truck Lift Crane

Check the lifting mechanism: Check the lifting mechanism of the bucket truck to ensure that it operates smoothly and shows no signs of damage or technical failure. Ensure there are no oil leaks or toxic exhaust fumes from the hydraulic system.
Check the electrical system: Check the electrical system of the bucket truck to ensure that all lights, warning lights, alarms, and controls are working correctly. Ensure that there are no damaged or severed electrical wires.
Check the bucket: Inspect the bucket and related parts to ensure they are free of cracks, rust, or other signs of damage. Make sure the doors and locks work correctly and there are no safety issues.
Check the boom: Inspect the boom of the bucket truck to ensure it is not bent or deformed and is rigid enough to bear the load. Ensure all latch points are securely fastened and show no signs of slipping.
Check the safety system: Check the safety system of the bucket truck, including the safety harness, protective cover, and emergency stop control. Ensure all these parts are working correctly and there are no safety issues.

B. Guide to Periodic Maintenance of a Bucket Truck Lift Crane

Check the lifting mechanism: Inspect the components of the lifting mechanism such as the hydraulic pump, piston, and valves to ensure they operate smoothly and show no signs of oil leakage or wear.
Check the electrical system: Inspect all electrical devices such as lights, warning lights, alarms, and controls to ensure they are working correctly and show no signs of damage or disconnection.
Lubricate and maintain the boom: Lubricate the moving parts of the boom to reduce friction and ensure smooth operation. At the same time, inspect and maintain other mechanical parts of the boom to ensure they are not damaged.
Check the bucket and safety system: Inspect the bucket and related parts such as the door and lock to ensure they work correctly and show no signs of damage. At the same time, check and test the safety system such as the safety harness and emergency stop control.
Overall maintenance: Finally, perform overall maintenance for the bucket truck, including cleaning, servicing, and inspecting other parts such as the wheels, suspension system, and brake system.

IV. Safe Operating Procedures for a Bucket Truck Lift Crane

A. Step-by-Step Guide on Safe Operating Procedures for a Bucket Truck Lift Crane

Pre-use safety check: Before starting operation, check the bucket truck to ensure all systems and parts are functioning correctly and show no signs of damage or technical faults.
Wear personal protective equipment: Before getting into the bucket, employees must ensure they are wearing full personal protective equipment such as a helmet, safety glasses, gloves, and a safety harness.
Determine a safe position and control: Before moving the bucket truck, ensure the work location is safe and suitable. Use the controls to move the bucket slowly and with control.
Monitor the surrounding environment: Always keep your eyes focused on the surrounding environment when operating the bucket truck to avoid collisions with other structures or materials.
Adhere to safety rules when working at height: When working at height, always remember to follow safety rules such as not standing on unstable edges and not exceeding the specified load capacity of the bucket.
Communicate and cooperate: Always communicate with colleagues and other operators during the operation of the bucket truck, ensuring everyone is aware of the activities and potential hazards.
Safe shutdown: When finishing the job, ensure the bucket truck is returned to a safe position and all systems are turned off before leaving the work site.

B. Emergency Response Measures and Incident Response Mechanisms When Operating a Bucket Truck Lift Crane

Stop and assess the situation: As soon as an incident is detected, the bucket truck operator must stop immediately and assess the situation to determine the cause and severity of the incident.
Contact and report: Contact other colleagues and report the incident to a manager or authorized person to receive necessary support and guidance.
Safety guidance: If necessary, guide other personnel to stay away from the hazardous area and keep themselves safe while waiting for assistance.
Use safety equipment: Use safety equipment such as safety harnesses or protective covers to minimize the risk of accidents and protect personnel.
Administer first aid: If necessary, provide basic first aid to the injured and request assistance from the emergency medical team if needed.
Report and review: After the incident has been handled, create a report on the incident and review it to learn about preventive measures for the future and improve operating procedures.

V. Risk Assessment and Hazard Management When Operating a Bucket Truck Lift Crane

A. Identifying Potential Risks and Hazards in Bucket Truck Lift Crane Operation

Risk of accidents from falling from height: Employees are at risk of falling from the bucket when not using safety equipment correctly or not adhering to safety rules when working at height.
Collisions and impacts: The bucket truck can collide with or impact other structures or construction materials during movement, causing damage to the equipment or injury to employees and people nearby.
Getting stuck and lifting mechanism failure: An incident of getting stuck in the bucket or a failure of the lifting mechanism can lead to a dangerous situation and require emergency intervention for rescue.
Electrical incidents: Damage or collision with power lines can cause an electrical incident, endangering employees and potentially leading to fire or explosion.
Mechanical and structural failures: A bucket truck may experience mechanical or structural failures after a period of use, leading to a risk of incidents during operation.

B. Effective Hazard Prevention Strategies When Operating a Bucket Truck Lift Crane

1. Regular Inspection and Maintenance of the Bucket Truck Lift Crane for Safe Operation

Inspect the lifting mechanism: Ensure that the lifting mechanism of the bucket truck operates smoothly and shows no signs of oil leakage or wear. Maintain and replace damaged parts according to the maintenance schedule.
Inspect the electrical system: Check all electrical equipment such as lights, indicators, alarms, and controls to ensure they are working correctly and show no signs of damage.
Lubricate and maintain the boom: Lubricate the moving parts of the boom to reduce friction and ensure smooth operation. Check and maintain other mechanical parts of the boom to ensure they are not damaged.
Inspect the bucket and safety system: Check the bucket and related parts such as doors and locks to ensure they are working correctly and show no signs of damage. Check and test the safety system, such as the safety harness and emergency stop control.

2. Adhere to Occupational Safety Regulations for Safe Operation of the Bucket Truck Lift Crane

Training and education: Ensure that all personnel involved in operating the bucket truck are fully trained and educated on safety procedures, equipment use, and accident prevention measures.
Use of Personal Protective Equipment (PPE): Require all personnel to wear personal protective equipment such as helmets, safety glasses, gloves, and safety harnesses when working at height or near moving equipment.
Assign tasks and define responsibilities: Clearly define the roles and responsibilities of each employee in the process of operating the bucket truck, ensuring that everyone understands and follows instructions.
Monitor and assess risks: Conduct monitoring and assessment of potential risks during the operation of the bucket truck, thereby implementing preventive measures and improving safety.
Report and handle incidents: Require all personnel to immediately report any incident or dangerous situation that arises during the operation of the bucket truck, and take timely corrective and handling measures.

3. Identify and Mark Safe Zones When Operating a Bucket Truck Lift Crane

Identify the safe zone: First, identify the safe zone around the bucket truck based on the size and scale of the equipment, as well as the work location and potential risks.
Use safety signs and markings: Use safety signs and markings such as warning signs, ground markings, and warning signs to mark the safe zone and guide personnel and bystanders to a safe location.
Identify hazardous areas: Simultaneously identify and mark hazardous areas around the bucket truck such as the movement area of the bucket, the work area, and the impact area of the boom.
Ensure clarity and easy recognition: Ensure that safety signs and markings are placed in a clear and easily recognizable position so that everyone can easily identify and comply.

4. Use Personal Protective Equipment When Operating a Bucket Truck Lift Crane

Helmet: A helmet is one of the most important pieces of personal protective equipment to protect the head from falling objects or impacts.
Safety glasses: Safety glasses help protect the eyes from dust particles, debris, and materials falling from above when operating the bucket truck.
Protective gloves: Protective gloves help protect the hands from sharp materials and chemicals, while providing a better grip when handling.
Safety harness: A safety harness is used to tie oneself to the bucket truck, ensuring that the employee does not fall from a height in case of loss of balance or an incident.
Safety shoes: Safety shoes provide stability and protection for the feet from heavy falling materials or impacts from the crane boom.
Protective clothing: Protective clothing should also be used to protect the body from heavy materials and chemicals.

5. Emergency Procedures and Response in Case of an Incident When Operating a Bucket Truck Lift Crane

Stop and assess the situation: As soon as an incident is detected, the bucket truck operator must stop immediately and assess the situation to determine the cause and severity of the incident.
Contact and notify: Contact other colleagues and report the incident to the manager or authorized person to receive the necessary support and guidance.
Safety guidance: If necessary, guide other personnel to stay away from the hazardous area and keep themselves safe while waiting for assistance.
Use safety equipment: Use safety equipment such as a safety harness or protective cover to minimize the risk of accidents and protect personnel.
Administer first aid: If necessary, provide basic first aid to those who are injured and request assistance from the emergency medical team if needed.
Report and review: After the incident has been handled, prepare a report on the incident and review it to learn about preventive measures for the future and improve operating procedures.

6. Participate in Occupational Safety Training Courses for Operating a Bucket Truck Lift Crane

Occupational safety and health training is not only a legal requirement but also a commitment to the safety and health of workers. It helps employees recognize and deal with hazards and dangerous situations, thereby reducing accidents, injuries, or fatalities in daily work.

The risk of accidents is always present and can occur at any time in the work environment due to the possibility of human error and the inability to foresee all situations. This emphasizes the need for continuous Occupational Safety Training and vigilance.

When participating in occupational safety training at An Toan Nam Viet Center, workers will be thoroughly trained from theory to real-life risk scenarios. Accordingly, there will be measures to identify and prevent occupational accident risks that may occur during work. After the training course, trainees will take occupational safety tests to obtain an occupational safety certificate. From there, workers will have a clear understanding of safety knowledge as well as a valid certification for employment.

VI. Factors Affecting Occupational Safety When Operating a Bucket Truck Lift Crane

A. How Weather Conditions Affect the Operation of a Bucket Truck Lift Crane

Strong winds: Strong winds can change the direction and speed of the bucket truck, making it difficult to control and reducing the ability to operate safely.
Rain or snow: Rain or snow can increase the slipperiness of the work surface, creating a risk of slipping and loss of balance for the bucket truck.
Fog or dense mist: Fog or dense mist can reduce the operator’s visibility, decreasing the ability to recognize and react correctly in case of an incident.
Extreme heat or cold: Extreme heat can increase the risk of heat-related illnesses and exhaustion for employees, while extreme cold can reduce the performance of the equipment and increase the risk of failure.
Severe storms or other harsh weather conditions: Harsh weather conditions such as severe storms, ice, or sandstorms can pose a high risk and require a halt in operations until conditions improve.

B. How the Work Environment Affects the Operation of a Bucket Truck Lift Crane

Confined spaces: In work environments with confined spaces, such as in urban areas, moving and operating a bucket truck can become difficult and require precise control skills to avoid collisions and incidents.
Hilly or uneven terrain: Hilly or uneven terrain can create challenges for operating a bucket truck, especially in determining a safe position and maintaining balance.
Environments with pollutants or chemicals: Work environments with pollutants or chemicals can cause damage to the equipment and increase the risk of accidents for employees.
Lighting and visibility conditions: Poor lighting and limited visibility can reduce the employee’s ability to recognize and react correctly, especially in work environments at night or with insufficient light.
Temperature and humidity: High or low temperature and humidity can affect the health and work performance of employees, as well as reduce the performance of the equipment.

C. How the Technical Condition of the Bucket Truck Lift Crane Affects its Operation

Mechanical condition of the bucket truck: The mobility and operational capability of the bucket truck depend on the condition of mechanical parts such as the boom, hydraulic pump, and travel mechanism.
Control system: The control system of the bucket truck must operate accurately to ensure safe and precise control from a distance or from inside the crane’s cabin.
Cable and hook system: The condition of the cables and lifting hooks needs to be checked regularly to ensure they are not worn, broken, or damaged, which could pose a risk of falling objects.
Maintenance and regular checks: Performing regular maintenance and technical checks is extremely important to detect and fix technical problems early, avoiding the risk of accidents and breakdowns.
Age and usage history: An older bucket truck or one with a long usage history may encounter more technical problems than new equipment, and therefore needs to be monitored and checked more thoroughly.

D. How the Safety Knowledge and Skills of the Worker Affect the Operation of a Bucket Truck Lift Crane

Understanding of the equipment: Knowledge of the structure, operating principles, and safety features of the bucket truck is necessary for the worker to use and operate it safely and effectively.
Control skills: The ability to control the bucket truck accurately and meticulously is important to avoid collisions, falling objects, and other incidents during operation.
Knowledge of occupational safety: Understanding of occupational safety rules, legal regulations, and necessary safety procedures is required to prevent accidents and protect oneself and others.
Emergency response skills: The ability to react quickly and correctly in case of an incident is important to minimize consequences and ensure everyone’s safety.

VII. Occupational Safety Training on Safe Operation Skills for Bucket Truck Lift Cranes

A. Why Bucket Truck Lift Crane Operators Need to be Trained in Occupational Safety

Reduce accident risk: Occupational safety training helps bucket truck operators recognize and understand potential hazards and risks while working, enabling them to apply preventive measures and protect themselves effectively to minimize accident risk.
Enhance safety awareness: Training helps raise employees’ awareness of the importance of complying with safety regulations and implementing personal protective measures, thereby helping to create a safer working environment.
Effective response in emergencies: A person trained in occupational safety has the necessary knowledge and skills to respond correctly in case of an incident and emergency situations, helping to minimize the consequences of accidents and protect everyone’s health.
Compliance with legal regulations: Occupational safety training helps bucket truck operators understand and comply with legal regulations related to occupational safety, thereby reducing the risk of violations and avoiding legal consequences.
Increase work efficiency: Employees trained in occupational safety are often more confident and at ease in their work, thereby increasing work efficiency and quality, while minimizing time off due to work-related accidents.

B. Where to Get Occupational Safety Training for Operating a Bucket Truck Lift Crane?

An Toan Nam Viet is a reputable and high-quality occupational safety training center in Vietnam today. With occupational safety training sessions held continuously at production workshops, factories, or construction sites across the country (63 provinces in Vietnam).

To ensure effective training, An Toan Nam Viet prepares carefully and meticulously, down to the smallest detail. From preparing tools, equipment, teaching aids to curriculum, materials, sound, and lighting.

The occupational safety training instructors at An Toan Nam Viet are experts with many years of experience in the field. They even have research projects identifying hazards in all occupations and how to prevent them.

The instructor’s lectures are drawn from practical experience and are conveyed in a vivid, easy-to-understand manner to the workers. These factors help workers feel comfortable during the learning period and absorb the taught knowledge well. Of course, the knowledge conveyed always adheres to Decree 44/2016/ND-CP. From there, they will grasp many measures to prevent hazards and how to protect themselves. At the same time, they will also apply it most appropriately in their actual work.

VIII. The Significance of Occupational Safety in Operating a Bucket Truck Lift Crane

A. The Importance of Maintaining Occupational Safety in Bucket Truck Lift Crane Operation

Protecting the health and safety of employees: The process of operating a bucket truck can pose many risks and dangers to employees, from workplace accidents to health problems due to the work environment. Maintaining occupational safety helps minimize these risks and protect the health of employees.
Minimizing the risk of accidents and equipment damage: Complying with safety regulations and measures not only helps prevent workplace accidents but also minimizes the risk of damage or destruction of equipment, thereby saving on maintenance and repair costs.
Enhancing work performance: A safe and comfortable work environment helps boost employee morale, thereby improving work performance and quality.
Strengthening the organization’s reputation and image: Maintaining occupational safety is not only an ethical responsibility but also an important factor in building the organization’s reputation and image in the community and on the market.
Complying with legal regulations: Adhering to occupational safety regulations and standards is mandatory by law, and maintaining occupational safety is an important part of meeting legal requirements and avoiding risks related to violations.

B. Important Safety Measures to Know Before Operating a Bucket Truck Lift Crane

Regular technical inspection: Before use, the bucket truck should be thoroughly inspected to ensure all parts are functioning correctly and safely.
Use Personal Protective Equipment (PPE): Ensure the operating team is fully equipped with PPE such as helmets, safety glasses, gloves, and safety shoes to protect against hazards and injuries.
Adhere to safety rules during operation: Follow basic safety rules such as not exceeding the permissible load capacity, not operating in hazardous environmental conditions, and not exceeding safe speeds.
Respond in emergency situations: Be trained to know how to react quickly and correctly in case an incident occurs, including stopping the bucket truck and requesting help if needed.
Report incidents and safety issues: Immediately report any incident or safety issue you detect during operation, so that potential future risks can be addressed and prevented.
Participate in occupational safety training: Complete an occupational safety training course to be issued a occupational safety card by the training center to strengthen your records in compliance with work regulations.