Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Manual for Rugby Ball Manufacturing

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, MORE THAN 300 INDUSTRIES)

Discover in-depth occupational safety documents for rugby ball production! This document will provide the necessary knowledge to help you understand the regulations, and measures to protect the health and safety of workers, ensuring an efficient and safe production process.

Table of Contents

PART I: CURRENT STATE OF SAFETY IN THE RUGBY BALL PRODUCTION OCCUPATIONAL SAFETY DOCUMENT INDUSTRY

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents in rugby ball manufacturing plants

In the process of producing rugby balls, compliance with occupational safety regulations is extremely important to ensure the health and safety of workers. However, there have still been some unfortunate accidents that have seriously affected workers as well as the plant’s operations.

Accidents due to equipment failure: There have been cases where workers were seriously injured due to machinery in the production line malfunctioning. Failure to regularly maintain and inspect the equipment has led to unnecessary accidents.
Falls due to slippery floors: Some workers have had accidents due to falling on wet or slippery floors during the production process. This highlights the importance of maintaining hygiene and ensuring that work surfaces are always dry.
Accidents due to falling objects: There have been cases where workers were injured by heavy objects falling from above. This indicates that effective safety measures are needed to protect workers from the risks of materials during the production process.
Collisions between workers: In a crowded work environment, collisions and scrapes between workers are one of the main causes of occupational accidents. Training on how to move and work safely is necessary to minimize this risk.

Through these accidents, we need to draw valuable lessons about the importance of implementing occupational safety measures to protect the health and lives of workers, while also improving production efficiency in the rugby ball manufacturing industry.

PART II: OCCUPATIONAL SAFETY AND HEALTH WHEN WORKING IN A RUGBY BALL MANUFACTURING PLANT

I. Occupational safety and health for Raw Material Cutting staff

1. Job characteristics of Raw Material Cutting

The raw material cutting stage is a crucial step in the rugby ball production process, where the materials are prepared and shaped to create the perfect pieces for the final product. During this process, materials such as rubber, fabric, and plastic will be cut to specific sizes and shapes, ensuring that each piece meets the necessary quality standards. Precision in this stage is extremely important, as even a small error can affect the durability and functionality of the ball.

The workers who perform the raw material cutting work must have high skills and concentration to ensure that the pieces are cut evenly and accurately. In addition, the use of modern and regularly maintained cutting equipment also contributes to improving the efficiency and quality of the product. To minimize risks in the work process, the factory regularly organizes occupational safety training sessions, helping workers to understand how to use machinery as well as measures to protect themselves from accidents. Thanks to the attention paid to the raw material cutting stage, the rugby ball product will achieve high uniformity and quality, meeting the needs of the market.

2. Types of occupational accidents during Raw Material Cutting

In the raw material cutting stage, despite being carried out under supervision and according to safety procedures, there are still many potential risks leading to occupational accidents. One of the common types of accidents is injury from cutting equipment. Cutting machines, although designed to be safe, can still cause injury if the worker is not careful or does not follow the correct operating procedures. Deep cuts, and even amputation of a hand, often occur when workers do not use adequate protective equipment.

In addition, the working environment can also lead to accidents. Slippery floors due to dirt or grease from machinery can cause workers to fall, resulting in serious injuries. Lack of lighting or a poorly ventilated workspace can also create unnecessary risks, reducing the worker’s ability to observe and react.

In addition, work pressure to meet production deadlines can cause workers to rush and not pay attention, leading to errors in the raw material cutting process. Companies need to be aware of these risks and invest in safety measures, and organize regular training to raise awareness of occupational safety in the raw material cutting stage, protecting the health and lives of workers.

3. Causes of occupational accidents during Raw Material Cutting

Occupational accidents during the raw material cutting process can stem from various causes, with the human factor playing a significant role. One of the main causes is the lack of concentration or fatigue of the worker. When they are not focused on the job, errors can occur in the cutting process, leading to serious injuries. Work pressure and production deadlines sometimes cause workers to feel stressed, affecting their ability to work safely.

Besides the human factor, the cutting equipment is also a key factor. If the machinery is not regularly maintained or used incorrectly, the risk of incidents will increase. Damaged cutting equipment or blunt blades can lead to workers having to use more force, increasing the likelihood of accidents.

In addition, working conditions also contribute significantly to occupational safety. An unclean work environment, with dirt or obstacles, can cause workers to easily trip or collide with machinery. Furthermore, if there is not enough protective equipment such as gloves or safety glasses, the risk of injury will also increase. To minimize accidents, factories need to focus on improving working conditions, raising awareness of occupational safety, and organizing regular training for workers.

4. Measures to prevent occupational accidents during Raw Material Cutting

To prevent occupational accidents during the raw material cutting process, the first step is to enhance training and raise safety awareness for workers. Regular training sessions will help workers understand safe work procedures, from how to use machinery to identifying potential hazards. In particular, providing adequate personal protective equipment such as gloves, safety glasses, and specialized shoes is essential to minimize risks at work.

In addition, regular inspection and maintenance of cutting equipment also plays an important role in preventing accidents. Machinery needs to be regularly serviced to ensure efficient and safe operation. Workers should also be encouraged to promptly report any equipment problems they encounter, to avoid prolonged damage and danger during production.

In addition, improving the working environment is also an indispensable factor. The floor needs to be kept clean, dry, and free of obstacles, and the lighting must be sufficient for workers to see clearly. Finally, encouraging workers to work in a comfortable, stress-free spirit will help them focus more on their work, thereby minimizing accidents. These measures not only help protect the health of workers but also improve production efficiency in the factory.

5. Occupational safety regulations for Raw Material Cutting

Occupational safety regulations in the raw material cutting stage are an essential factor in protecting the health and safety of workers. First, all workers involved in the raw material cutting process must be thoroughly trained on safe work procedures and how to use machinery correctly. They must be familiar with specific regulations, such as always wearing personal protective equipment, including gloves, safety glasses, and masks, to minimize the risk of injury.

In addition, the implementation of regular inspection and maintenance of machinery is mandatory. Before starting a work shift, workers must check the operating condition of the equipment, ensuring that it has no signs of damage or malfunction. If any problems are detected, it is very important to report them to the manager immediately for timely handling.

The working environment also needs to be strictly managed, with a clean and well-ventilated floor, free of obstacles or dirt. The regulations on safe distance between cutting machines and the work area also need to be strictly implemented to avoid collisions. Finally, workers should be encouraged to work in a comfortable and stress-free state of mind, thereby improving their concentration and caution during work. The full implementation of these regulations will help to minimize occupational accidents and ensure a safe and efficient working environment.

6. Handling emergency occupational accidents during Raw Material Cutting

In the event of an occupational accident during the raw material cutting process, timely and effective handling is extremely important to ensure the safety of the victim and other workers. As soon as an accident is discovered, the nearest worker must immediately stop all production activities and notify the manager or the on-site rescue team. This quick intervention not only helps to minimize the severity of the injury but also creates conditions for timely first aid.

If the victim shows signs of serious injury, such as heavy bleeding or a fracture, it is necessary to immediately call an ambulance for professional assistance. While waiting, workers can perform basic first aid measures, such as using a tourniquet to stop bleeding or immobilizing the fracture to avoid worsening the condition.

At the same time, the manager needs to record the details of the incident, including the time, location, and related factors, to serve the investigation of the cause and improve the safety process later. After the situation is handled, a meeting must be held to review the situation and draw lessons, in order to raise the awareness of occupational safety for all employees. The good implementation of the occupational accident handling process not only protects the health of workers but also contributes to building a safer and more efficient working environment.

II. Occupational safety and health for Exterior Machining staff

1. Job characteristics of Exterior Machining

The exterior machining of a rugby ball is one of the most important steps in the production process, ensuring that the final product achieves high durability and aesthetic appeal. In this stage, the raw material pieces that have been cut to the appropriate size and shape will be processed by pressing or sewing with a layer of rubber or fabric. The outer shell not only creates a finished surface for the ball but also plays an important role in protecting the internal parts, improving the product’s lifespan.

The machining process requires high precision and attention to every detail. Workers must ensure that the raw material pieces are tightly bonded, with no gaps or holes that could reduce the ball’s performance. The choice of suitable rubber or fabric is also very important, as it affects the feel when used and the ability to withstand external factors.

In addition, the exterior machining stage also has many risks, from the use of machinery, sharp tools to contact with chemicals used in production. Therefore, compliance with occupational safety regulations and the use of personal protective equipment is very necessary to protect the health of workers. Through this, the exterior machining work is not only a combination of technology and art, but also an indispensable part of the rugby ball production process.

2. Types of occupational accidents during Exterior Machining

During the exterior machining of a rugby ball, various types of occupational accidents can occur due to different causes. One of the most common risks is accidents related to machinery. When using a press or sewing machine, workers can get their hands or other body parts caught if they do not follow safety procedures. Inattention or carelessness in work can lead to serious injuries.

In addition, during the handling of materials such as rubber or fabric, workers may experience cutting or tearing accidents. Sharp tools such as cutting knives or scissors can cause injuries if not used correctly. Not to mention, contact with chemicals used for surface treatment can lead to burns or skin allergies if appropriate protective measures are not in place.

A state of stress and fatigue during work can also increase the risk of accidents. When workers are not in good health or have an unstable mentality, their ability to pay attention and react quickly will decrease, easily leading to errors in their work. Therefore, identifying and preventing these types of accidents is very important to ensure occupational safety for workers and maintain production efficiency in the factory.

3. Causes of occupational accidents during Exterior Machining

The causes of occupational accidents during the exterior machining of rugby balls often stem from a variety of factors, including human, machine, and work environment. First, the lack of attention and skill of the worker is one of the main causes. When a worker does not comply with safety procedures or is not fully trained on how to use the equipment, the risk of an accident will increase significantly.

Second, machinery is a major factor in the machining process. If machinery is not regularly maintained or has an unsafe design, it can cause serious accidents, such as getting a hand or other body parts caught. These incidents often occur when workers are not paying attention to safety warnings or when the machinery is operating unstably.

In addition, the work environment also plays an important role. A cramped, unsanitary workspace can lead to the risk of slips or collisions between workers. Furthermore, contact with chemicals during machining can also cause accidents if appropriate protective measures are not in place. Therefore, identifying and managing these causes is necessary to minimize occupational accidents and protect the health of workers in the rugby ball manufacturing industry.

4. Measures to prevent occupational accidents during Exterior Machining

To prevent occupational accidents during the exterior machining of a rugby ball, implementing safety measures is extremely important. First, workers need to be fully trained on the work process as well as how to use machinery safely. This not only helps to raise safety awareness but also reduces the risk of accidents due to a lack of skills.

At the same time, the factory should perform regular maintenance on the equipment and machinery. This helps to ensure that all equipment operates stably and safely. The installation of safety equipment such as emergency stop switches, and protective fences around the machine are also effective measures to protect workers from the risk of being caught or colliding.

Furthermore, a neat and clean work environment is also very important in preventing accidents. The arrangement and organization of tools and materials in a scientific manner will help to minimize the risk of slips or collisions between workers.

Finally, the use of personal protective equipment such as gloves, masks, and protective glasses not only helps to protect health but also enhances safety during work. All these measures need to be implemented synchronously and continuously to ensure that workers have a safe and efficient working environment.

5. Occupational safety regulations for Exterior Machining

Occupational safety regulations in the process of machining the exterior of a rugby ball are very necessary to ensure the health and safety of workers. First, all workers involved in the machining process must be thoroughly trained on the work process as well as the safety measures related to equipment and raw materials. Understanding how to operate machinery, as well as identifying potential risks, will help to minimize risks during work.

In addition, the factory needs to establish clear regulations on the use of personal protective equipment. Workers must always wear gloves, protective glasses, and masks when working with materials such as rubber and fabric, in order to protect them from the risk of injury and the effects of chemicals.

Compliance with equipment maintenance regulations is also an important part of the safety process. Machinery needs to be inspected and maintained regularly to ensure safe operation. At the same time, safety signs and instructions must be placed in easy-to-see locations in the work area to remind workers of the safety process.

Finally, establishing a timely feedback system for incidents and occupational accidents is also very important. Workers must be encouraged to report any situation that may cause danger, thereby helping to improve the working environment and enhance safety for everyone in the factory.

6. Handling emergency occupational accidents during Exterior Machining

When an occupational accident occurs during the exterior machining of a rugby ball, timely and effective handling is very important to minimize damage and protect the health of workers. First, when an accident is discovered, the nearest worker must immediately report to the manager or the occupational safety department so that they can quickly deploy response measures. At the same time, all production activities in the accident area must be stopped to ensure the safety of the remaining people.

If someone is injured, initial first aid should be given immediately. Workers who have been trained in first aid can help handle minor injuries, while more serious cases require an immediate call to the ambulance service. The internal communication system in the factory must operate well so that the rescue call can be made quickly.

After the emergency situation is handled, an investigation needs to be conducted to determine the cause of the accident. Collecting information from witnesses and assessing the working conditions will help improve future safety procedures. Finally, all workers need to be informed of the situation that occurred and the measures that have been taken to prevent similar incidents in the future, thereby raising awareness and responsibility for safety at work.

III. Occupational safety and health for Assembly staff

1. Job characteristics of Assembly

Assembly is a crucial stage in the production process of a rugby ball, where the machined parts will be combined to form a finished product. During this stage, workers will attach the cut and machined pieces, using techniques such as pressing, sewing, or gluing to ensure all details are securely connected. The assembly process is not just about attaching the parts together, but also requires meticulous attention to every detail.

One of the most important factors in assembly work is checking the fit of the assembled pieces. This ensures that the ball does not leak when used, contributing to improving the quality and durability of the product. To achieve this standard, workers need to have skills and experience, as well as patience to check and adjust each part.

The work environment in the assembly stage also needs to be organized scientifically so that workers can easily access the necessary tools and minimize the risk of accidents. In general, assembly work not only requires technique but also requires smooth coordination among workers, helping to ensure that each finished product meets the highest quality standards.

2. Types of occupational accidents during Assembly

During the rugby ball assembly process, although the work is usually carried out in a safe environment, there are still many risks and potential for occupational accidents. One of the common types of accidents is injury from using tools or equipment incorrectly. When workers attach the pieces together, they may slip, resulting in cuts or scratches when using sharp tools or machinery.

In addition, accidents can occur when workers have to work in a confined space or in an uncomfortable posture, which can lead to musculoskeletal injuries. Having to sit, stand, or bend over for long periods can cause back pain, neck pain, or other posture-related problems.

Another type of accident that can occur is an incident due to material leakage during assembly. If the assembled pieces are not tightly connected, the pressure inside the ball can cause an explosion, leading to danger for those working around. These situations not only affect the health of workers but can also cause damage to equipment and raw materials.

Therefore, it is very important to be aware of and prevent occupational accidents during the assembly process. Workers need to be fully trained on safety procedures, as well as use appropriate personal protective equipment to minimize the risk of accidents.

3. Causes of occupational accidents during Assembly

Occupational accidents during the assembly of rugby balls often stem from various causes, and identifying these causes is necessary to take effective preventive measures. One of the main causes is the lack of training and guidance for workers on safe assembly procedures. When not fully equipped with knowledge and skills, workers can perform operations incorrectly, leading to accidents.

In addition, working in an unsafe environment is also a major cause. If the workplace is not well-lit, tidy, or has slippery liquids, the risk of slipping or injury from collisions will increase. This is especially dangerous when workers are using sharp tools or machinery.

Incorrect working posture also contributes to an increase in occupational accidents. Workers who often have to work in a cramped space or in an uncomfortable posture can lead to musculoskeletal injuries. In addition, the use of substandard or damaged equipment can also cause unexpected incidents.

Finally, work pressure and stress can cause workers to lose focus and make mistakes, increasing the likelihood of accidents. In general, a clear understanding of the causes of occupational accidents during assembly will help to build a safer working environment and protect the health of workers.

4. Measures to prevent occupational accidents during Assembly

To minimize occupational accidents during the rugby ball assembly process, it is essential to implement preventive measures. First, the company needs to organize safety training and education programs for workers. This helps them to master safe work procedures, how to use tools, and measures to respond in case of an incident.

In addition, maintaining a clean and tidy work environment also plays an important role in preventing accidents. Work areas that are scientifically organized will help workers to move easily and avoid the risk of slipping or colliding with objects. Ensuring adequate lighting is also an important factor, as this helps workers to see small details clearly during assembly.

In addition, the use of personal protective equipment such as gloves, safety glasses, and non-slip shoes is also an important measure to protect the health and safety of workers. A regular inspection system for machinery and assembly equipment also needs to be implemented to promptly detect potential incidents.

Finally, encouraging workers to promptly report any problems they encounter during work will help to create a safer working environment. When applied synchronously, these measures will contribute to minimizing the risk of occupational accidents during the assembly process.

5. Occupational safety regulations for Assembly

During the rugby ball assembly process, compliance with occupational safety regulations is very important to protect the health and lives of workers. First, all workers involved in the assembly process must be thoroughly trained on safe work procedures. They need to master the regulations related to safety when using equipment and tools, as well as how to handle emergency situations.

In addition, the use of personal protective equipment is mandatory. Workers need to wear gloves, safety glasses, and specialized shoes to minimize the risk of injury during assembly. At the same time, it is not permissible to ignore checking the condition of the equipment and tools before use, ensuring that they are in good and safe working order.

The regulations also require workers to work in a clean, tidy environment to avoid accidents such as slips or collisions. The ventilation system also needs to be well maintained to ensure that the air in the assembly area is always fresh.

Finally, prompt reporting of any incidents or risks during work is extremely important. This not only helps to raise awareness of occupational safety but also helps to ensure the safety of everyone in the factory. When all these regulations are strictly implemented, the risk of occupational accidents will be significantly reduced.

Complete occupational safety training courses at occupational safety training centers to obtain a certificate of occupational safety. From there, workers will have a clear understanding of safety knowledge as well as valid certification for employment.

6. Handling emergency occupational accidents during Assembly

When an occupational accident occurs during the assembly of a rugby ball, timely and effective handling is very important to protect the lives and health of workers. First, the worker closest to the accident scene should immediately sound the alarm to everyone around and request assistance from other colleagues. This helps create a safe environment and minimizes the risk of other accidents.

In the case of an injury, it is necessary to quickly determine the severity of the situation. If the victim needs immediate first aid, the person closest should take basic first aid measures such as checking breathing, stopping bleeding, or immobilizing the wound. However, if the situation is too serious, it is necessary to call an ambulance or take the victim to a medical facility.

At the same time, workers should not move the victim without guidance from medical personnel, as this could worsen their condition. After handling the emergency situation, it is necessary to investigate the cause of the accident to learn from experience and prevent similar incidents in the future. Organizing meetings to share experiences and improve work processes will also contribute to raising safety awareness in the factory.

IV. Occupational safety and health for Inflation staff

1. Job characteristics of Inflation

The inflation stage is a crucial step in the production process of a rugby ball, taking place after the parts of the ball have been fully assembled. During this stage, the ball will be inflated to the standard pressure, ensuring its functionality and correct shape. To achieve this, the worker needs to use specialized inflation equipment, ensuring that the pressure does not exceed the specified level, to avoid damaging the product or causing the ball to leak.

The inflation process is not just about blowing air into the ball; it also requires a high degree of concentration and experience from the person performing it. The worker needs to continuously monitor to adjust the pressure, ensuring that the ball does not over-inflate, which could lead to deformation or bursting. In addition, a thorough inspection after inflation is necessary to promptly detect any errors or defects in the product. In particular, the work environment during this stage also needs to be kept safe to protect the health of the worker and the quality of the final product.

2. Types of occupational accidents during Inflation

During the inflation process of a rugby ball, some occupational accidents may occur if occupational safety regulations are not followed. One of the common types of accidents is injuries from the inflation equipment. This equipment can cause injury if not used correctly, especially when the air pressure is high. If the worker is not careful, the pressure may increase beyond the permissible level, causing the ball to explode or burst, which is dangerous for the person performing the task and those around.

In addition, workers may encounter accidents related to contact with compressed air. When handling the pump, there is a risk of compressed air escaping suddenly, which can cause eye or skin damage. If not wearing adequate protective gear such as safety glasses or gloves, workers are prone to injury when compressed air is unexpectedly released.

In addition, carelessness in checking the pressure can also lead to accidents. If not carefully monitored, the ball can be over-inflated, causing an explosion and affecting the health of the worker. To minimize risks, occupational safety training for workers in this stage is very important.

3. Causes of occupational accidents during Inflation

Occupational accidents during the inflation process of rugby balls often stem from several main causes. First, inattention and carelessness in operation are the most common causes. When workers are not focused on their task, they may forget to check the ball’s pressure, leading to over-inflation, which can cause an explosion or damage the product.

Second, a lack of personal protective equipment also contributes to an increased risk of accidents. If workers do not wear safety glasses, gloves, or do not use safe pumping equipment, they may be injured in the event of an incident.

Third, the use of substandard or damaged inflation equipment is also a serious cause. This equipment needs to be inspected and maintained regularly; otherwise, it may malfunction, leading to a dangerous situation for workers.

Finally, a lack of knowledge and skills about the inflation process also poses a risk. If workers are not fully trained on how to inflate safely and how to handle emergency situations, the risk of accidents will be high. Raising awareness and training for workers is a key factor in minimizing accidents in this stage.

4. Measures to prevent occupational accidents during Inflation

To ensure occupational safety during the rugby ball inflation process, it is essential to implement preventive measures. First, workers need to be thoroughly trained on the inflation process and any potential hazards. This not only helps them understand their tasks but also provides them with the knowledge to handle emergency situations when necessary.

In addition, the use of personal protective equipment such as gloves, safety glasses, and masks also plays an important role in minimizing risks. Workers should be regularly reminded of the importance of using proper protective equipment throughout the work process.

Furthermore, regular inspection and maintenance of inflation equipment is an indispensable measure. The equipment must be ensured to be in good working order and meet safety standards before use. The careful pressure checking process also helps to detect early signs of abnormalities, minimizing the risk of explosion or breakdown.

Finally, the work environment also needs to be kept clean and tidy. A well-organized arrangement not only creates favorable conditions for workers to perform their work but also helps them avoid unwanted accidents. The synchronous implementation of these measures will contribute to creating a safe and efficient inflation process.

Complete the occupational safety training course to be issued a Group 3 Occupational Safety Card by the occupational safety training center to complete your work file as required.

5. Occupational safety regulations for Inflation

During the inflation process of a rugby ball, compliance with occupational safety regulations is very important to protect the health and safety of workers. Before starting work, all workers must be trained on the inflation process and related safety regulations. This process not only includes inflation but also preparation steps before work, such as checking the pumping equipment and ensuring that it is working properly.

Workers need to check the pressure carefully and according to the manufacturer’s instructions. Do not over-inflate the pressure, as this can lead to the rugby ball being damaged or even exploding. In addition, the use of personal protective equipment is mandatory, including safety glasses, gloves, and masks, to protect workers from potential risks during work.

In addition, the inflation area needs to be kept clean and well-ventilated, to avoid stuffiness or lack of air, which helps workers to work in the best conditions. Finally, workers must immediately report any incidents that occur to ensure that timely corrective measures are taken, thereby maintaining safety throughout the entire production process.

6. Handling emergency occupational accidents during Inflation

During the inflation of a rugby ball, occupational accidents can occur unexpectedly and must be handled promptly to ensure everyone’s safety. When an incident such as a ball exploding or a pump breaking is discovered, workers must quickly stop the inflation operation and leave the danger zone. In particular, it is necessary to warn those around to avoid the incident from spreading or causing further damage.

Immediately after ensuring the safety of everyone, it is necessary to notify the medical team or the person in charge of occupational safety. They will be responsible for checking the condition of the injured worker and taking the necessary first aid measures. If the situation is serious, it is very important to call an ambulance immediately to ensure that the worker receives timely medical care.

In addition, after the incident has been handled, it is necessary to conduct an investigation into the cause of the accident. This helps to identify loopholes in the safety process and take effective corrective measures to prevent similar accidents from occurring in the future. Recording the incident is also a way to raise awareness of occupational safety for all workers in the work environment.