Home > Occupational safety training > Study and get certified > Occupational safety knowledge > Occupational safety documents > Safety Document Group 3 > Occupational Safety Document for Tempered Glass Manufacturing

Category Map

DOWNLOAD THE OCCUPATIONAL SAFETY DOCUMENT SET (6 GROUPS, OVER 300 INDUSTRIES)

This document includes safety knowledge from safety regulations to risk prevention measures, while also analyzing their positive impact on tempered glass production. Let’s explore how occupational safety documents help improve quality and efficiency in this industry.

Table of Contents

PART I: CURRENT STATE OF SAFETY IN THE TEMPERED GLASS MANUFACTURING INDUSTRY

I. General Situation

The Ministry of Labour, Invalids and Social Affairs informs sectors and localities of the occupational accident situation in the first 6 months of 2024 and outlines key solutions to proactively prevent incidents and accidents in the last 6 months of 2024. According to reports from 61 out of 63 centrally governed provinces and cities, in the first 6 months of 2024, there were a total of 3,201 occupational accidents nationwide (a decrease of 227 cases, equivalent to 7.09% compared to the same period in 2023), resulting in 3,065 victims (a decrease of 197 people, equivalent to 6.04% compared to the first 6 months of 2023), including both employees under labor contracts and those working without labor contracts. Specifically:

Number of fatal occupational accidents: 320 cases, a decrease of 25 cases (7.25%) compared to the first 6 months of 2023 (including 245 cases in areas with labor relations, a decrease of 28 cases or 10.3%; and 75 cases in areas without labor contracts, an increase of 3 cases or 4.2% compared to the first 6 months of 2023);
Number of deaths due to occupational accidents: 346 people, a decrease of 7 people or 1.98% compared to the same period in 2023 (including 268 in areas with labor relations, a decrease of 13 people or 4.63%; and 78 in areas without labor contracts, an increase of 6 people or 8.33%).
Number of people seriously injured: 810 people, an increase of 26 people or 3.32% compared to the first 6 months of 2023 (including 710 in areas with labor relations, a decrease of 5 people or 0.7%; and 100 in areas without labor contracts, an increase of 31 people or 44.92%).

Download the PDF file Occupational Accident Report – First 6 Months of 2024 issued by the Ministry of Labour, Invalids and Social Affairs.

The occupational accident situation in the first 6 months of 2024 in both sectors with and without labor relations saw a decrease in the number of deaths and fatal accidents compared to the same period in 2023.

II. Some occupational accidents in tempered glass manufacturing plants

In the tempered glass manufacturing industry, occupational safety management plays a crucial role in protecting the health and lives of employees. However, some notable occupational accidents have occurred, highlighting the challenges and risks that this industry is facing. Below are some notable accidents in tempered glass manufacturing plants.

Risks Related to the Production Process: Some accidents have occurred due to failures in the tempered glass production process. This can include the process of heating and cooling glass, where there are risks related to temperature and pressure.
Safety Issues in Material Handling: Accidents can arise from handling the raw materials used to create tempered glass. Incidents in the processing and transportation of materials can be dangerous if safety measures are not followed.
Old Equipment and Technology: Some accidents may be related to the use of old equipment and technology that does not meet modern safety standards. Improving and investing in new equipment can minimize risks.
Lack of Training and Safety Awareness: In some cases, accidents can stem from a lack of awareness of occupational safety and a lack of training for employees. Raising awareness and providing effective training are important to reduce accidents.
Safety Policies and Regulatory Compliance: Non-compliance with safety policies and regulations is another cause of accidents in the tempered glass manufacturing industry. This poses a challenge in promoting compliance and building a safe work environment.

By examining these accidents and implementing improvement measures, the tempered glass manufacturing industry can increasingly improve its work environment and minimize risks for employees.

PART II: OCCUPATIONAL SAFETY AND HEALTH IN TEMPERED GLASS PRODUCTION

I. Occupational safety and health for employees operating the silica raw material furnace to create glass sheets

1. Job characteristics of operating a silica raw material furnace to create glass sheets

The process of operating a furnace for silica raw material to produce glass sheets requires in-depth expertise and precision from the worker. This job includes many important characteristics to ensure the production process runs smoothly and the product achieves high quality.

One of the most important factors is controlling the furnace temperature. The silica raw material must undergo a heating process at a specific temperature to achieve the desired plasticity and transparency. Managing and maintaining the temperature within a narrow range is key to ensuring product uniformity.

In addition, this process requires high technical supervision of pressure and heating time. This is particularly important to avoid overheating or over-heating, which can lead to poor quality products and wasted raw materials.

2. Types of accidents during the operation of a silica raw material furnace to create glass sheets

During the operation of a furnace for silica raw material to produce glass sheets, various types of accidents can occur, requiring full warning and prevention from the worker. Some common risks include temperature incidents, pressure issues, and the risk of fire and explosion.

Temperature accidents often occur when the furnace temperature is not controlled. This can lead to a change in the molecular structure of the raw material, affecting the final quality of the product. At the same time, pressure incidents can also occur, especially when the pressure suddenly increases, which can cause fires or machine breakdowns.

The risk of fire and explosion is a serious challenge when working with silica raw material, especially in an oxygen-rich environment. Maintaining safe conditions and using personal protective equipment are important to prevent these accidents.

3. Causes of accidents when operating a silica raw material furnace to create glass sheets

There are many causes of accidents when operating a furnace for silica raw material to produce glass sheets. One of the main factors is a lack of attention and control over important technical parameters. Failure to maintain temperature, pressure, and heating time within specified limits can lead to unwanted fluctuations in the production process.

A lack of in-depth knowledge of the process is another cause. The worker needs to have in-depth knowledge of the properties of the silica raw material, as well as how it reacts under the influence of temperature and pressure. This knowledge helps prevent unwanted phenomena, such as changes in molecular structure or the creation of non-uniform products.

4. Measures to prevent accidents when operating a silica raw material furnace to create glass sheets

To minimize the risk of accidents when operating a furnace for silica raw material to produce glass sheets, implementing preventive measures and ensuring occupational safety are extremely important. Occupational safety training plays a decisive role in proactively managing risks and ensuring a safe work environment.

One of the important measures is to ensure that everyone working is fully trained on safety procedures and the use of personal protective equipment. This training not only focuses on understanding the production process but also emphasizes how to deal with emergency situations, minimizing the risks of uncontrolled temperature and pressure.

In addition, establishing and maintaining a quality and safety monitoring system is also an important measure. Controlling technical parameters, ensuring the correctness of temperature and pressure, and conducting periodic inspections, help prevent problems before they become dangerous.

5. Occupational safety regulations when operating a silica raw material furnace to create glass sheets

Occupational safety regulations during the operation of a furnace for silica raw material to produce glass sheets play a crucial role in protecting the health and lives of employees. Accordingly, wearing full personal protective equipment, such as a helmet, safety glasses, and personal protective clothing, is mandatory to minimize risks from factors like temperature, pressure, and grease.

A safety monitoring system is also strictly regulated, with the establishment of limit indicators for temperature and pressure. Employees are regularly trained on how to deal with emergency situations and the proper use of safety equipment.

Specific regulations on monitoring the quality of raw materials and final products are established to ensure that the production process meets safety and quality standards. Periodic quality control measures and immediate reporting also help prevent incidents before they cause serious consequences.

6. Handling emergency accident situations when operating a silica raw material furnace to create glass sheets

Handling an emergency accident situation during the operation of a furnace for silica raw material is an important part of the safety measures chain. When an incident occurs, a quick and accurate response from the worker is a crucial decision.

First, the worker needs to be familiar with the emergency action plan and know how to use safety equipment. Wearing full personal protective equipment and performing first aid steps are top priorities to protect oneself and colleagues.

Effective communication in an emergency is important. Immediately notify colleagues and the manager of the specific situation and request help. Cooperation and unity in implementing the safety plan will minimize the impact of the accident.

II. Occupational safety and health for employees operating glass sheet cutting machines

1. Job characteristics of operating a glass sheet cutting machine

Operating a glass sheet cutting machine requires professionalism and precise skill. This process includes many important characteristics to ensure the performance and quality of the product. One of the important factors is controlling the cutting speed and pressure, which directly affects the accuracy of the produced glass sheets.

In addition, the machine operation process also involves selecting the appropriate cutting tool for the specific type of glass, such as tempered or regular glass. This requires a deep understanding of material properties and the ability to read technical instruction manuals.

The employees operating the glass sheet cutting machine also need to control the accuracy of the cutting dimensions, ensuring that each product meets quality standards. Inspection and measurement skills are particularly important to avoid wasting raw materials and to ensure consistency in the production process.

2. Types of accidents during the operation of a glass sheet cutting machine

During the operation of a glass sheet cutting machine, there are risks of accidents that employees need to be aware of and prevent. One of the common risks is the use of cutting tools without following proper safety rules. This can lead to accidents such as cutting a finger or severe injuries.

In addition, material failures are also a risk, especially when handling tempered glass. The glass can shatter or break into small pieces, posing a danger to surrounding employees. To prevent this, the use of specialized safety glasses is very important.

Most importantly, care in handling and storing glass is key to avoiding accidents. Safety measures include keeping safety glasses on, following the correct machine usage rules, and training employees on how to react in case of an incident. All of these together create a safe and effective work environment during the operation of a glass sheet cutting machine.

3. Causes of accidents when operating a glass sheet cutting machine

Accidents during the operation of a glass sheet cutting machine often stem from several main causes. One of the most important factors is a lack of understanding of the machine’s operating technique. Inadequately trained employees can lead to the improper use of tools or incorrect machine settings, increasing the risk of accidents.

Another common cause is a lack of safety preparation. Not using proper protective equipment, such as cut-resistant gloves and safety glasses, can increase the risk of injury when working with glass.

In addition, a lack of understanding of the properties of glass can also lead to accidents. For tempered glass, not applying the correct pressure and cutting speed can cause the glass to explode or break into small pieces, creating a dangerous situation.

4. Measures to prevent accidents when operating a glass sheet cutting machine

Measures to prevent accidents when operating a glass sheet cutting machine lay an important foundation for a safe working environment. First, ensuring that employees are well-trained in the process and techniques of using the machine is important. Regular monitoring of the working environment helps to assess the safety level of the work environment, thereby creating conditions to adjust and improve protective measures.

Using full personal protective equipment, including safety glasses and cut-resistant gloves, is a necessary measure. At the same time, inspect and maintain the machine periodically to ensure it operates safely and effectively. Monitoring of the working environment also helps to detect technical problems that could be dangerous early on.

Strengthening safety awareness and training employees on how to respond to emergencies is another important measure. At the same time, establishing a quality control process to ensure that the final product meets safety and quality standards.

5. Occupational safety regulations when operating a glass sheet cutting machine

Occupational safety regulations when operating a glass sheet cutting machine play a crucial role in protecting employees and ensuring a safe work environment. All employees must be trained on the use of the machine and must strictly follow safety instructions.

Specific regulations include the use of personal protective equipment such as safety glasses, cut-resistant gloves, and a safety helmet. These measures help protect workers from risks such as cuts and injuries.

In addition, safety regulations also include control over cutting pressure and speed, ensuring that they meet safety standards. Employees also need to be instructed on how to handle tempered glass and special situations.

6. Handling emergency accident situations when operating a glass sheet cutting machine

Handling an emergency accident situation when operating a glass sheet cutting machine requires quick thinking and a deep understanding of occupational safety. In the event of an accident, the first thing to do is to activate the alarm system to warn all employees. Then, the employee should stop the machine and shut off all power sources to prevent any further danger.

At the same time, activate the first aid process immediately, which includes calling the emergency number and moving to the accident area with first aid kits and equipment. Trained employees must apply basic first aid measures to the injured person while protecting themselves from further accidents.

Reporting the incident immediately is important so that corrective measures can be taken and to avoid recurrence in the future. All of these steps together form a tight action plan, which helps to minimize the consequences of an accident when operating a glass sheet cutting machine and to protect the safety of everyone involved in the work process.

III. Occupational safety and health for employees operating a machine that uses high temperature and rapid cooling to temper glass sheets

1. Job characteristics of operating a machine that uses high temperature and rapid cooling to temper glass sheets

In the process of operating a machine that uses high temperature and cooling to temper glass sheets, there are several important characteristics to be aware of. First, the heat-cool process combined with pressure is strictly controlled to ensure accuracy in the tempering process. The machine must be able to maintain stable temperature and pressure to ensure the quality and uniformity of the final product.

For operating a tempering machine, time and process management are crucial factors. Each stage of the process, from heating to cooling, needs to be precisely adjusted to ensure that the glass is treated correctly. Technical parameters such as time, temperature, and pressure must be adjusted optimally to ensure the safety and quality of the product.

In addition, the rapid cooling process is a decisive factor in creating tempered glass sheets. The machine must be able to cool effectively and uniformly to avoid problems such as non-uniformity in the strength and durability of the glass.

2. Types of accidents during the operation of a machine that uses high temperature and rapid cooling to temper glass sheets

During the operation of a machine that uses high temperature and rapid cooling to temper glass sheets, there are several accident risks to be concerned about. One of the common problems is the risk of fire and explosion due to a sudden increase in temperature. Controlling temperature and pressure is a decisive factor to avoid this situation, and a safety system must be ensured to prevent unwanted accidents.

Second, there may be a risk of occupational safety if employees do not follow safety rules correctly. This includes the full use of personal protection, following the correct work procedure, and having a clear understanding of the risks that can occur in a high-temperature and rapid-cooling work environment.

In addition, quality management issues can arise if the machinery is not properly maintained. Breakdowns or a lack of maintenance can lead to failures in the tempering process, causing great losses in raw materials and products.

3. Causes of accidents when operating a machine that uses high temperature and rapid cooling to temper glass sheets

The causes of accidents during the operation of a machine that uses high temperature and rapid cooling to temper glass sheets can stem from many different factors. One of the main causes is a lack of management and control of the process. If there is no close supervision and periodic evaluation, unwanted fluctuations in temperature, pressure, or time can lead to unexpected results.

Second, the cause can come from equipment or system failure. Improperly maintained machinery can malfunction, leading to a loss of control and accidents. Important parts need to be regularly checked and maintained to ensure stable operation.

In addition, the human factor also plays an important role. A lack of understanding of the process, carelessness in performing the work, or a lack of concentration can create dangerous situations. Full and regular training, along with creating a safe work environment, are important to minimize the risk of accidents during the operation of a glass tempering machine.

4. Measures to prevent accidents when operating a machine that uses high temperature and rapid cooling to temper glass sheets

To ensure safety during the operation of a machine that uses high temperature and rapid cooling to temper glass sheets, implementing preventive measures is important. First, it is necessary to establish a strict monitoring regime for important parameters such as temperature, pressure, and time. An early warning system will help detect risks and prevent accidents before they happen.

Second, training machine operators is an important measure. They need to be instructed on safety procedures, the use of personal protective equipment, and how to respond to emergencies. A full understanding of the work process will reduce the risk of errors and accidents.

Furthermore, proper maintenance of machinery also plays an important role in accident prevention. Periodic maintenance, inspection, and replacement of broken parts will help ensure that the machine operates stably and safely.

5. Occupational safety regulations when operating a machine that uses high temperature and rapid cooling to temper glass sheets

Occupational safety regulations are an indispensable factor when operating a machine that uses high temperature and rapid cooling to temper glass sheets. First, employees must be fully equipped with personal protective equipment, including safety glasses, heat-resistant gloves, and chemical-resistant clothing.

In addition, the work process must be carried out according to safety instructions. Full compliance with the rules, from handling raw materials to maintaining hygiene, is important to minimize risks. In particular, controlling and minimizing direct contact with high temperatures requires special attention and the use of proper protective equipment.

Periodic training on occupational safety is important to ensure employees have a clear understanding of the risks and preventive measures. An alarm system and an emergency response plan also need to be established to deal with any unwanted situations.

6. Handling emergency accident situations when operating a machine that uses high temperature and rapid cooling to temper glass sheets

Handling an emergency accident situation is an important part of the safety process when operating a machine that uses high temperature and rapid cooling to temper glass sheets. In the event of an incident, immediately activating the alarm system and notifying all employees is important.

Employees must be trained to know how to use safety equipment such as first aid kits and safe means of transport. They also need to know how to use safety nets and other emergency measures to prevent the situation from worsening.

Managing an accident situation also requires a clear and detailed response plan. Assigning tasks, identifying safe locations, and establishing emergency communication are important to ensure everyone is safe and to avoid major property losses.

IV. Occupational safety and health for employees operating the machine for applying a reinforcing adhesive layer to the surface of tempered glass sheets

1. Job characteristics of operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

The adhesive coating machine is specially designed to reinforce the surface of the tempered glass sheet, increasing its impact and load resistance. Operating this machine requires a deep understanding of the types of adhesives used and how they interact with the glass sheet. This process usually involves controlling temperature and pressure to ensure the adhesive layer is evenly distributed on the glass surface.

Precision in the operation process is important to avoid an uneven adhesive layer, which can cause defects or safety factors. Specialists often need to monitor and control technical parameters such as the thickness of the adhesive layer, the transport speed of the glass sheet, and the adhesive application time to ensure the process proceeds correctly.

In this way, the operation process of the machine for applying a reinforcing adhesive layer on tempered glass sheets not only ensures the durability and safety of the final product but also demonstrates professionalism and quality in the modern glass manufacturing industry.

2. Types of accidents during the operation of a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

During the operation of a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet, there are several risks and types of accidents that need attention. One of the common problems is the possibility of an incident in controlling temperature and pressure. If not strictly controlled, this can lead to an uneven adhesive layer, affecting the final quality of the product.

Accidents related to the thickness of the adhesive layer can also occur, especially when the control process is not perfect. This can create weak points on the glass surface, reducing the impact resistance of the tempered glass sheet.

Even, if safety procedures are not followed correctly, accidents such as adhesive leaks can occur, creating a hazardous work environment. Ensuring safety compliance and training for employees is important to minimize this risk.

These accidents emphasize the importance of maintaining and strictly controlling the operation process of the machine for applying a reinforcing adhesive layer, ensuring that the final product not only achieves high quality but also meets safety standards in the glass manufacturing industry.

3. Causes of accidents when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

Accidents in the process of operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet can stem from many causes. One of the main causes is a lack of control and maintenance of temperature and pressure. When these factors are not kept stable, the adhesive layer can be distributed unevenly, affecting the quality and safety of the tempered glass sheet.

Another cause is a failure in the machinery system, including both measuring and control devices. If the machinery does not work correctly or the measuring devices are not accurate, it can lead to a final product that does not meet the technical requirements.

A lack of employee training can also create a risk of accidents. Employees who do not have a clear understanding of the operating procedures, work safety, and solutions for handling incidents may increase the risk of encountering problems during the production process.

4. Measures to prevent accidents when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

To ensure safety and quality in the process of operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet, several accident prevention measures should be taken. First of all, the process of training employees on how to use and operate the machine is important. Ensure that they have a clear understanding of the process, work safety, and know how to handle incidents quickly.

Strict control of temperature and pressure during the production process is key to avoiding accidents. Using and maintaining accurate measuring devices to keep operating conditions stable is important.

Improving the management and maintenance of the machinery system also helps prevent incidents. Periodically inspecting, maintaining, and upgrading the equipment are effective accident prevention measures.

5. Occupational safety regulations when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

Occupational safety regulations are a crucial factor when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet. Employees must strictly follow safety measures, including the full use of personal protective equipment such as safety glasses, gloves, and chemical-resistant clothing.

Safe work procedures also require employees to be fully trained on how to use the machine, recognize risks, and handle emergency situations. At the same time, it is necessary to establish preventive measures to minimize the risk of accidents during work.

Controlling the work environment is an important part of the safety regulations, especially regarding temperature and pressure. These parameters need to be kept stable to ensure the machine operation process proceeds safely and effectively.

6. Handling emergency accident situations when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet

Handling an emergency accident situation is an important part of the safety process when operating a machine that applies a reinforcing adhesive layer to the surface of a tempered glass sheet. In the event of an incident, training employees to react quickly and correctly is key.

Employees need to know how to use safety equipment and personal gear to protect themselves. At the same time, they need a clear understanding of the accident reporting process and how to trigger repair and prevention measures.

In an emergency, fostering a team spirit and effective communication between employees and managers is important. Ensure that everyone in the work team has sufficient knowledge and knows how to cooperate to resolve the situation.

V. Occupational safety and health for employees packaging finished tempered glass sheets

1. Job characteristics of packaging finished tempered glass sheets

In the process of packaging finished tempered glass sheets, many important characteristics need to be considered to ensure the quality and safety of the product. This process usually includes arranging, packaging, and transporting the tempered glass sheets.

First of all, attention must be paid to the arrangement of the glass during the packaging process. Ensure that each glass sheet is placed at a safe distance from others, avoiding collisions and breakage during transport. At the same time, using high-quality packaging materials helps protect the glass surface from scratches or damage.

In addition, the packaging process also needs to focus on ensuring the safety of those who handle and transport the product. Use protective means such as gloves and safety glasses to avoid accidents and ensure a safe work environment.

Finally, paying attention to the instructions for use and transportation is also important. Provide clear instructions on how to open the package, how to handle the product, and warnings about potential risks that may occur during use.

2. Types of accidents during the process of packaging finished tempered glass sheets

During the process of packaging finished tempered glass sheets, many types of accidents can occur, affecting product quality and occupational safety. Some common types of accidents include collisions between glass sheets, breakage during handling and transport, as well as employee injuries.

Collisions between glass sheets are a common problem when a safe distance is not maintained between them during the packaging process. This can lead to scratches or even broken glass, affecting the final quality of the product.

Breakage during handling and transport is also a challenge. If the correct packaging techniques and safe transport are not implemented, it is highly likely that the tempered glass sheet could be damaged, reducing the load-bearing capacity of the product.

Furthermore, accidents can happen to employees involved in the packaging process, especially when not using the correct protective equipment. Care and adherence to safety rules are important to avoid unwanted injuries.

3. Causes of accidents when packaging finished tempered glass sheets

The causes of accidents in the process of packaging finished tempered glass sheets often stem from many different factors. One of the main causes is a lack of knowledge and skill of the worker regarding the packaging process. When the correct techniques are not applied, collisions between glass sheets or breakage can occur, causing damage to the product.

Flaws in the packaging design process are also a potential cause of accidents. Packaging that is not strong enough or is not suitable may not properly protect the glass sheet during transport, leading to serious consequences.

A lack of occupational safety rules and not using protective equipment are other causes of accidents. Employees who do not follow safety regulations can be injured during the handling and packaging of tempered glass.

Finally, a lack of quality control in the production process can also lead to accidents. Tempered glass that does not meet quality standards can become a major risk during the packaging process, making the product prone to damage and breakage.

4. Measures to prevent accidents when packaging finished tempered glass sheets

To prevent accidents when packaging finished tempered glass sheets, implementing several preventive measures is important. First, training employees on the packaging process and occupational safety is a decisive factor. Ensuring they have a clear understanding of how to use protective equipment and adhere to safety rules helps reduce the risk of accidents.

The packaging process should also be designed to minimize direct contact between glass sheets, avoiding collisions and breakage. Use high-quality packaging materials to protect the glass surface from damage during transport.

Controlling the quality of tempered glass from the production stage is an important preventive measure. Ensuring that all products meet quality standards helps reduce the risk of breakage and damage during the packaging process.

Finally, establishing rules and a process for periodic safety checks increases efficiency in preventing accidents. Identifying and fixing safety issues as soon as they appear helps maintain a safe work environment and minimize risks.

5. Occupational safety regulations when packaging finished tempered glass sheets

Occupational safety regulations when packaging tempered glass sheets are an important part of the production process. Employees involved in packaging must be fully trained on the use of personal protective equipment, including safety glasses, gloves, and protective clothing, to ensure safety during product handling.

The regulations also set principles for a safe distance between glass sheets to avoid collisions and breakage. At the same time, ensure that all employees have a clear understanding of how to use the tools and equipment in the packaging process correctly, reducing the risk of occupational accidents.

In addition, safety regulations should also focus on the transportation process, ensuring that the product is not only packaged safely but also transported to its destination in the safest way possible.

6. Handling emergency accident situations when packaging finished tempered glass sheets

Handling an emergency accident situation when packaging tempered glass sheets is an important skill to ensure safety and minimize consequences. In the event of a collision between glass sheets or breakage, the most important thing is to stop work immediately and ensure the safety of all participating employees.

Employees need to be trained to know how to use personal protective equipment and perform immediate first aid measures. Contacting the first aid team and providing information about the specific situation is important to ensure a quick response.

While packaging tempered glass sheets, if a damaged glass is detected, the process should be stopped immediately and measures taken to re-package or dispose of the product according to a safe procedure. Keeping the work environment clean and organizing the product disposal process safely are key to preventing the accident from spreading.