Occupational Safety Test for Guitar Production

The test results will be sent to your Email. Please fill in the information completely.

Full name

Email

Company

Question 1: During the process of manufacturing and installing guitar accessories, what is the main cause of serious hand injuries?

a. Using hard woods that cause injury when held

b. Exposure to chemicals during wood surface treatment

c. Using too much force when installing the neck or bridge

d. Failure to regularly maintain sharp tools such as saws, knives, and cutters

Question 2: When finishing the surface of a guitar, what is the most serious consequence of using paint spray equipment incorrectly?

a. Uneven paint layer affects product quality

b. Inhaling toxic chemicals, which is dangerous to the respiratory system

c. Increased production time due to uneven drying of paint

d. Causes fire or explosion due to contact with high heat source

Question 3: During the piano lock installation process, what can happen if the technical process is not followed correctly?

a. The lock is easily loose, affecting the sound of the piano.

b. Workers are at risk of electric shock due to contact with metal parts.

c. The paint on the guitar is peeling off due to the force of tightening the lock too much.

d. The piano may warp due to uneven pressure applied by the piano key.

Question 4: Failure to organize the working space properly when making a piano can lead to which of the following consequences?

a. Reduced work efficiency due to time wasted searching for tools

b. Increased risk of falling due to unorganized items

c. Increased machinery maintenance costs due to dusty environment

d. Increased error rate in production due to lack of concentration

Question 5: In case a worker is poisoned by chemicals while finishing the piano surface, what is the first first aid measure that should be taken?

a. Drink plenty of water to dilute toxins in the body.

b. Remove the victim from the contaminated area and wash the exposed area.

c. Call an ambulance immediately without first aid.

d. Use a strong fan to blow away the surrounding chemical vapors.

Question 6: Which of the following is not correct when talking about the risks of using a polishing machine in the process of finishing the surface of the piano?

a. The machine may cause hand injury due to jamming or overloading.

b. Dust from the polishing process can cause respiratory damage if protective measures are not taken.

c. Workers may be electrocuted if the polishing machine leaks electricity.

d. The sander can damage the wood structure if used at too low a speed.

Question 7: During quality control after making a piano, why can using inadequate lighting be dangerous?

a. Makes it easy for workers to miss small errors, affecting product quality

b. Reduces concentration, easily leads to accidents due to incorrect operations

c. May cause workers to bend closer during inspection, causing back pain

d. Fire hazard if bulb overheats

Question 8: During the installation of the guitar neck, which of the following factors is a common cause of technical errors and accident risks?

a. Using too much force when assembling can cause hand injuries.

b. Choosing the wrong type of glue causes the neck to not be firmly fixed.

c. Working in a high humidity environment affects adhesion.

d. Not checking the string tension before installing the neck

Question 9: Which measure is not a way to prevent occupational accidents when making and finishing a piano?

a. Train workers on how to use protective equipment and tools

b. Carry out regular machine inspection and maintenance

c. Work continuously without rest to complete the product faster

d. Improve ventilation to minimize the risk of chemical exposure

Question 10: After a work accident occurs, which of the following steps is not part of the emergency handling procedure?

a. Give first aid to the victim immediately if the situation allows.

b. Investigate the cause of the accident to come up with preventive measures.

c. Require workers to continue working immediately after first aid.

d. Report incidents and make workflow adjustments as needed.

Question 11: While working, workers can omit some of the contents of the safe working process to do the job faster.

a. True

b. False

Question 12: Fire prevention and fighting measures are

a. Propaganda and education measures

b. Technical measures

c. Administrative and legal measures

d. Measures to choose fire-resistant or non-fire materials right from the design of the constructions

e. Measures for periodic inspection, maintenance and repair of machinery

f. All three (a, b, c) are correct.

g. All five (a, b, c, d, e) are correct

Question 13: When a worker suffers an occupational accident caused by the employer’s fault resulting in an 81% loss of working capacity, how much compensation is the worker entitled to?

a. 30 months of minimum wage

b. 30 months of social insurance salary contributions

c. 30 months of salary according to the labor contract.

Question 14: According to the provisions of Decree 44/2016/ND-CP dated May 15, 2016 of the Government, workers with strict requirements on labor safety (group 3) must receive at least how many hours of initial periodic training?

a. 16 hours

b. 24 hours

c. 30 hours

d. 48 hours

Question 15: Which of the following subjects are required to receive occupational safety and hygiene training?

a. Current workers and newly recruited employees

b. Apprentices and trainees

c. Probationary workers and freelance workers hired by the facility

d. Both (a) and (b) are correct

e. Both (a) and (c) are correct

f. All three (a, b, and c) are correct

Question 16: When an employee contracts an occupational disease, they will be:

a. Treated and given leave from work.

b. Treated until recovery and reinstated to their previous job.

c. Treated until recovery and reassigned to a job suitable for their health condition.

d. Provided with financial assistance and asked to find another job.

Question 17: According to the Law on Occupational Safety and Hygiene, how many obligations do employees have?

a. 1 obligation.

b. 2 obligations.

c. 3 obligations.

d. 4 obligations.

Question 18: Employees have the right to refuse to do work or leave the workplace while still receiving full pay and not being considered as violating labor discipline when they clearly see a risk of a work accident that seriously threatens their life and health and must immediately report to the person directly in charge, true or false?

a. True

b. False

Question 19: Causes of injury when using hand-held primitive tools

a. Using damaged tools or tools lacking safety equipment

b. Using it for purposes other than its intended purpose

c. Improper operation and use

d. Both (a) and (b) are correct

e. All three (a, b, and c) are correct

Question 20: Equip yourself with adequate personal protective equipment to

a. Preventing work accidents

b. Preventing occupational diseases

c. Both of the above

Occupational Safety Test for Guitar Production

The test results will be sent to your Email. Please fill in the information completely.

Theresa Phan

Leave a Reply Cancel reply

antoannamviet.com

Company Information

Terms and Legal

SERVICE PRODUCT REVIEW

The test results will be sent to your Email. Please fill in the information completely.

Theresa Phan

Leave a Reply Cancel reply

antoannamviet.com

Company Information

Terms and Legal

Login

Register